ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.
ຂໍ້ມູນຄວາມປອດໄພ
Please observe the following safety precautions to prevent injury or damage:
- ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ການເກີດໄຟຟ້າຊັອດ. ຕັດສາຍໄຟທີ່ຟິວ ຫຼືຕົວຕັດວົງຈອນກ່ອນຕິດຕັ້ງ ຫຼືໃຫ້ບໍລິການ.
- ຜະລິດຕະພັນນີ້ຕ້ອງໄດ້ຮັບການຕິດຕັ້ງຕາມລະຫັດການຕິດຕັ້ງທີ່ໃຊ້ໄດ້ໂດຍບຸກຄົນທີ່ຄຸ້ນເຄີຍກັບການກໍ່ສ້າງແລະການດໍາເນີນງານຂອງຜະລິດຕະພັນແລະອັນຕະລາຍທີ່ກ່ຽວຂ້ອງ.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- ຢ່າພະຍາຍາມດັດແປງອຸປະກອນ. ການດັດແກ້ໃດໜຶ່ງອາດຈະລົບລ້າງການຮັບປະກັນ ແລະສ້າງຄວາມສ່ຽງດ້ານຄວາມປອດໄພ.
- Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
- ໃສ່ແວ່ນຕາແລະຖົງມືຄວາມປອດໄພໃນລະຫວ່າງການຕິດຕັ້ງ.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- Motion sensor ceiling light fixture
- E26 Adapter (for recessed can installation)
- ຮາດແວຕິດຕັ້ງ (ສະກູ, ແກ່ນສາຍ)
- ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)
Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).
ຄຸນສົມບັດຜະລິດຕະພັນ
The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.
ຮູບພາບ: ຫຼາຍກວ່າview of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.
3CCT Selectable Color Temperature
This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lampຮົ່ມ. Note: This light is non-dimmable.
Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.
ຟັງຊັນເຊັນເຊີການເຄື່ອນໄຫວ
The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.
ການເລື່ອນເວລາທີ່ສາມາດປັບໄດ້
The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.
Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.
ຄໍາແນະນໍາການຕິດຕັ້ງ
Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.
Image: Installation diagrams for Junction Box and Recessed Can.
Junction Box Installation (3.5 or 4-inch J-Box)
- ປິດໄຟຢູ່ທີ່ຕົວຕັດວົງຈອນ.
- Remove the existing fixture from the junction box.
- Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
- ຍຶດອຸປະກອນຕິດໃສ່ກັບກ່ອງເຊື່ອມຕໍ່ໂດຍໃຊ້ສະກູທີ່ໃຫ້ມາ.
- ໃຫ້ແນ່ໃຈວ່າອຸປະກອນດັ່ງກ່າວຢູ່ໃນລະດັບດຽວກັນກັບເພດານ.
- ຟື້ນຟູພະລັງງານແລະທົດສອບແສງສະຫວ່າງ.
Recessed Can Installation (5 or 6-inch Can)
- ປິດໄຟຢູ່ທີ່ຕົວຕັດວົງຈອນ.
- If applicable, remove the existing bulb and trim from the recessed can.
- Screw the E26 adapter into the recessed can's socket.
- Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
- Attach the spring tabs (if not pre-attached) to the fixture.
- Gently push the fixture into the recessed can until the spring tabs secure it in place.
- ຟື້ນຟູພະລັງງານແລະທົດສອບແສງສະຫວ່າງ.
ຄໍາແນະນໍາການດໍາເນີນງານ
Adjusting Color Temperature (CCT)
ການປ່ຽນແປງອຸນຫະພູມສີ:
- ໃຫ້ແນ່ໃຈວ່າປິດໄຟ.
- Carefully open or remove the lampຮົ່ມ.
- Locate the CCT selection switch on the fixture's circuit board.
- Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
- ແນບ lampຮົ່ມຢ່າງປອດໄພ.
- ຟື້ນຟູພະລັງງານ.
ກໍານົດເວລາຊັກຊ້າ
To adjust the time the light stays on after motion ceases:
- ໃຫ້ແນ່ໃຈວ່າປິດໄຟ.
- Carefully open or remove the lampຮົ່ມ.
- Locate the time delay switch on the fixture's circuit board.
- Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
- ແນບ lampຮົ່ມຢ່າງປອດໄພ.
- ຟື້ນຟູພະລັງງານ.
ການເຄື່ອນໄຫວເຊັນເຊີປະຕິບັດງານ
The motion sensor operates based on ambient light levels and detected movement:
- ເວລາກາງເວັນ: The light will remain OFF even if motion is detected, conserving energy.
- Nighttime/Dark Environments: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
- ປິດອັດຕະໂນມັດ: After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).
Image: Visual guide to motion sensor behavior during day and night.
ບໍາລຸງຮັກສາ
To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:
- ທໍາຄວາມສະອາດ: ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດ. ໃຊ້ອ່ອນ, ແຫ້ງ, ຫຼືເລັກນ້ອຍ damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- ການກວດກາ: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
- ການທົດແທນດອກໄຟ: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your light, refer to the table below for common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແສງບໍ່ໄດ້ເປີດ. | No power; Sensor not detecting motion; Ambient light too bright; Incorrect wiring. | Check circuit breaker; Ensure motion is within range; Verify ambient light is dark enough; Check wiring connections. |
| ແສງຕິດຢູ່ຢ່າງຕໍ່ເນື່ອງ. | Constant motion detected; Time delay set too long; Sensor malfunction. | Ensure no continuous motion; Adjust time delay setting; Contact support if issue persists. |
| ແສງສະຫວ່າງ flickers ຫຼື dims. | Loose wiring; Voltage fluctuations; Fixture damage. | Check all wiring connections; Consult an electrician for voltage issues; Contact support if damaged. |
| Motion sensor is not responsive. | Sensor obstructed; Incorrect sensitivity; Ambient light too bright. | Clear any obstructions; Ensure ambient light is low; Sensor sensitivity is fixed for this model. |
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | ECOELER |
| ໝາຍເລກຕົວແບບ | CDR615C |
| ວັດtage | 16 ວັດ |
| ຄວາມສະຫວ່າງ | 1000 Lumens |
| ອຸນຫະພູມສີ | 3000K Warm White, 4000K Cool White, 5000K Daylight (Selectable) |
| ສະບັບtage | 120 ໂວນ |
| ວິທີການຄວບຄຸມ | ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ |
| ຊ່ວງເຊັນເຊີການເຄື່ອນໄຫວ | 9-16 ຟຸດ |
| ການຕັ້ງຄ່າການຊັກຊ້າເວລາ | 30 seconds, 1 minute, 5 minutes (Adjustable) |
| ວັດສະດຸ | Acrylic, ອະລູມິນຽມ |
| ຂະໜາດ (L x W x H) | 7.48" x 1.45" x 7.48" |
| ປະເພດການຕິດຕັ້ງ | Flush Mount (Junction Box or Recessed Can) |
| ການຢັ້ງຢືນ | ETL, FCC Listed |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ພາຍໃນ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.
ການຊ່ວຍເຫຼືອລູກຄ້າ: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.