WORKPRO W159025 Cordless 3.6V Grass and Hedge Trimmer User Manual

1. ບົດແນະນຳ

The WORKPRO W159025 is a versatile cordless 3.6V grass and hedge trimmer designed for efficient garden maintenance. This tool features a dual-purpose design, allowing for quick conversion between a grass shear and a hedge trimmer. Its lightweight and compact design, combined with Type-C USB charging, makes it convenient for various trimming tasks around your garden.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your WORKPRO W159025 trimmer. Please read it thoroughly before first use and keep it for future reference.

2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເມື່ອໃຊ້ເຄື່ອງໃຊ້ໄຟຟ້າເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊອດ ແລະ ການບາດເຈັບສ່ວນບຸກຄົນ.

• ອ່ານຄຳແນະນຳທັງໝົດ: ຄຸ້ນເຄີຍກັບການຄວບຄຸມແລະການນໍາໃຊ້ທີ່ເຫມາະສົມຂອງເຄື່ອງມື.
• ໃສ່ການປົກປ້ອງຕາ: Always wear safety glasses or goggles when operating the trimmer.
• ຮັກສາພື້ນທີ່ໃຫ້ຊັດເຈນ: ຮັບປະກັນວ່າພື້ນທີ່ເຮັດວຽກບໍ່ມີສິ່ງເສດເຫຼືອ, ເດັກນ້ອຍ ແລະ ສັດລ້ຽງ.
• ຫຼີກເວັ້ນການເລີ່ມຕົ້ນໂດຍບັງເອີນ: Ensure the safety lock button and operating switch are not engaged unintentionally.
• ໃຊ້ເຄື່ອງສາກທີ່ຖືກຕ້ອງ: Only use a 5V/2A adapter for charging. Using a 5V/1A adapter may trigger overvoltage protection and prevent charging.
• ກວດ​ສອບ​ແຜ່ນ​ໃບ​ຄ້າຍ​ຄື​: Before each use, check blades for damage or wear. Replace if necessary.
• Secure Blades: Ensure blades are correctly installed and secured before operation.
• Keep Hands Away: Never touch the blades while the tool is operating or connected to power.
• ເກັບຮັກສາໄວ້ຢ່າງປອດໄພ: ເກັບຮັກສາເຄື່ອງມືໄວ້ໃນບ່ອນທີ່ແຫ້ງ, ປອດໄພຫ່າງຈາກເດັກນ້ອຍ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​:

• WORKPRO W159025 Main Unit
• Grass Shear Blade (75mm cutting width)
• Hedge Trimmer Blade (120mm cutting width, 7.8mm max cutting diameter)
• Type-C USB Cable (1m)
• ຄູ່ມືຜູ້ໃຊ້

4. ຜະລິດຕະພັນເກີນview

The WORKPRO W159025 features a compact and ergonomic design for comfortable use. Key components include:

• ດ້າມຈັບ TPR: ສະຫນອງການຈັບທີ່ສະດວກສະບາຍແລະປອດໄພ.
• ປຸ່ມລັອກຄວາມປອດໄພ: ປ້ອງກັນການເປີດໃຊ້ງານໂດຍບັງເອີນ.
• ສະວິດປະຕິບັດການ: ກະຕຸ້ນໃບມີດ.
• ປຸ່ມປ່ອຍແຜ່ນ: For quick and tool-free blade changes.
• ຜອດສາກໄຟ Type-C: ສໍາລັບການສາກໄຟສະດວກ.
• LED Charging Indicator Light: Displays charging status (Red: Charging, Green: Fully Charged, Yellow: Approx. 50% charged).
• ແຜ່ນໃບຄ້າຍຄືປ່ຽນໄດ້: Includes both grass shear and hedge trimmer blades.

Figure 1: WORKPRO W159025 Component Diagram

5. ຕັ້ງຄ່າ

5.1. ການສາກແບັດເຕີຣີ

The device is powered by a 3.6V rechargeable battery. Before first use, fully charge the battery.

1. ຊອກຫາຊ່ອງສຽບສາຍສາກ Type-C ໃນອຸປະກອນ.
2. ເຊື່ອມຕໍ່ສາຍ USB Type-C ທີ່ໃຫ້ມາເຂົ້າກັບພອດສາກໄຟ.
3. ເຊື່ອມຕໍ່ປາຍອີກດ້ານໜຶ່ງຂອງສາຍ USB ເຂົ້າກັບອະແດບເຕີໄຟ USB 5V/2A (ບໍ່ລວມ).
4. The LED indicator light will show red during charging. It will turn green when fully charged (approximately 2-3 hours). A yellow light indicates approximately 50% charge.

ຮູບທີ 2: ການສາກໄຟແບບ Type-C

5.2. Changing Blades

The WORKPRO W159025 allows for easy, tool-free blade changes between the grass shear and hedge trimmer blades.

1. ໃຫ້ແນ່ໃຈວ່າອຸປະກອນຖືກປິດ ແລະຕັດການເຊື່ອມຕໍ່ຈາກແຫຼ່ງພະລັງງານໃດໆ.
2. Push the two blade release buttons on either side of the blade housing.
3. Carefully remove the installed blade.
4. Align the desired blade (grass shear or hedge trimmer) with the pins on the main unit.
5. Press the blade firmly into place until it clicks securely.

Figure 3: Blade Change Mechanism

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. ເປີດ / ປິດພະລັງງານ

The WORKPRO W159025 features a dual safety mechanism to prevent accidental starts.

1. To start the tool, simultaneously press the safety lock button (located on the top of the handle) and the operating switch (trigger).
2. Once the tool starts, you can release the safety lock button, and the tool will continue to operate as long as the operating switch is pressed.
3. To turn off the tool, release the operating switch.

Figure 4: Safety Lock and Operating Switch

6.2. Using the Grass Shear

Attach the grass shear blade for trimming grass in small areas, around edges, or where larger mowers cannot reach.

• Ensure the grass shear blade is securely attached.
• Hold the tool firmly with both hands, if possible, or one hand if comfortable and safe.
• Activate the tool as described in Section 6.1.
• Move the tool steadily across the grass, maintaining a consistent height. The cutting width is 75mm.

Figure 5: Grass Shearing Operation

6.3. Using the Hedge Trimmer

Attach the hedge trimmer blade for shaping shrubs and hedges. The cutting width is 120mm, and the maximum cutting diameter is 7.8mm.

• Ensure the hedge trimmer blade is securely attached.
• ຖືເຄື່ອງມືຢ່າງແຫນ້ນຫນາ, ຮັບປະກັນການຍຶດຫມັ້ນທີ່ຫມັ້ນຄົງ.
• Activate the tool as described in Section 6.1.
• Move the trimmer smoothly along the hedge, cutting small amounts at a time. Avoid forcing the blades through thick branches.
• The handle can rotate 180 degrees for improved ergonomics and access to different angles. To rotate the handle, press the handle rotation button (if present, otherwise manually rotate if designed for it) and adjust to the desired position.

Figure 6: Hedge Trimming Operation

7. ບໍາລຸງຮັກສາ

7.1. Cleaning and Blade Care

• Always ensure the tool is switched off and the battery is removed (if applicable) before cleaning or performing maintenance.
• Clean the blades after each use to remove sap, debris, and dirt. Use a stiff brush and a damp cloth. For stubborn residue, a blade cleaner or light oil can be used.
• Periodically apply a thin layer of machine oil to the blades to prevent rust and ensure smooth operation.
• Inspect blades for sharpness and damage. Dull or damaged blades can reduce efficiency and increase strain on the motor. Replace worn blades as needed.

7.2. ການເກັບຮັກສາ

• ເກັບຮັກສາເຄື່ອງມືໄວ້ໃນພື້ນທີ່ແຫ້ງແລ້ງ, ລະບາຍອາກາດໄດ້ດີ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.
• Ensure the blades are clean, dry, and lightly oiled before storage.
• Keep the tool out of reach of children and unauthorized persons.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or replacement parts, please contact WORKPRO customer service or refer to the official WORKPRO webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ທ່ານສາມາດໄປຢ້ຽມຢາມໄດ້ ຮ້ານ WORKPRO ໃນ Amazon.