ຄູ່ມືຜູ້ໃຊ້ GoodWe 3648-EM Hybrid Inverter

ແນະນຳ

This manual provides essential information for the safe and efficient operation, installation, and maintenance of the GoodWe 3648-EM Hybrid Inverter. Please read this manual thoroughly before installation and operation, and keep it for future reference.

The GoodWe 3648-EM is a high-performance hybrid inverter designed for residential and light commercial solar energy systems, integrating solar power generation, battery storage, and grid connection capabilities.

ສິນຄ້າເກີນview

The GoodWe 3648-EM Hybrid Inverter system includes the main inverter unit and a three-phase Smart Meter for comprehensive energy management.

Figure 1: GoodWe 3648-EM Hybrid Inverter (top) and accompanying Smart Meter (bottom left).

This image displays the primary components of the GoodWe 3648-EM system. The larger unit is the hybrid inverter, characterized by its white casing and black control panel with indicator lights. Below and to the left is the compact Smart Meter, designed for DIN rail mounting, also in a white casing with a small display and indicator lights.

ຮູບ 2: ດ້ານຫນ້າ view of the GoodWe 3648-EM Hybrid Inverter.

This image shows a detailed front view of the GoodWe 3648-EM Hybrid Inverter. The front panel features a series of LED indicators and buttons for status monitoring and basic control. The GoodWe logo is visible on the right side of the control panel.

ຮູບທີ 3: ໄລຍະໃກ້ view of the GoodWe Smart Meter.

This image provides a close-up of the GoodWe Smart Meter, a compact device with a small digital display and several indicator lights (power, communication, status). It is designed for integration into electrical panels to monitor energy flow.

ຂໍ້ມູນຈໍາເພາະ

ຄໍາແນະນໍາຄວາມປອດໄພ

Always adhere to local electrical codes and regulations. Installation and maintenance should only be performed by qualified personnel.

• Ensure the inverter is disconnected from all power sources (PV, battery, grid) before performing any work.
• ຫ້າມເປີດ inverter ຄasing unless explicitly instructed by GoodWe technical support.
• Avoid touching live electrical components.
• ຮັບ​ປະ​ກັນ​ການ​ຕໍ່​ຫນ້າ​ດິນ​ທີ່​ເຫມາະ​ສົມ​ຂອງ inverter ໄດ້​.
• ຮັກສາເດັກນ້ອຍ ແລະບຸກຄະລາກອນທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດຢູ່ຫ່າງຈາກພື້ນທີ່ຕິດຕັ້ງ.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

1. ການຫຸ້ມຫໍ່ແລະການກວດກາ

Carefully unpack the inverter and Smart Meter. Inspect all components for any signs of damage during transit. Report any damage to your supplier immediately.

2. ການຕິດຕັ້ງ Inverter

Choose a suitable mounting location that is:

• Well-ventilated and protected from direct sunlight.
• ຫ່າງຈາກວັດສະດຸໄວໄຟ.
• ສາມາດເຂົ້າເຖິງສໍາລັບການບໍາລຸງຮັກສາ.
• Capable of supporting the inverter's weight (17 kg).

Use the provided mounting bracket and hardware to securely fasten the inverter to a solid wall or frame.

3. ການເຊື່ອມຕໍ່ໄຟຟ້າ

All electrical connections must comply with local wiring regulations and standards. Refer to the connection diagram below for guidance.

ຮູບ 4: ດ້ານຫລັງ view of the GoodWe 3648-EM Hybrid Inverter showing connection ports.

This image displays the rear panel of the GoodWe 3648-EM Hybrid Inverter, highlighting its various connection terminals. These include inputs for PV strings (PV1, PV2), battery connections, grid connection (ON-GRID), backup load connection (BACK-UP), and communication ports (RS485, Meter). A large heat sink is visible at the bottom.

1. ການເຊື່ອມຕໍ່ PV: Connect the positive and negative cables from your solar array to the PV1 and PV2 inputs. Ensure correct polarity.
2. ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: Connect the battery bank to the dedicated battery terminals. Observe correct polarity (+/-).
3. ການເຊື່ອມຕໍ່ຕາຂ່າຍໄຟຟ້າ: Connect the inverter to the main electrical grid.
4. Backup Load Connection: For critical loads, connect them to the backup output.
5. Smart Meter Connection: Connect the three-phase Smart Meter as per the wiring diagram provided in the full installation guide.
6. ການຕໍ່ດິນ: Ensure the inverter chassis is properly grounded.

4. Communication Setup (Wi-Fi)

The inverter features integrated Wi-Fi for monitoring and configuration. Follow these general steps:

• ພະລັງງານໃນ inverter ໄດ້.
• Connect your device (smartphone, laptop) to the inverter's Wi-Fi hotspot (SSID typically starts with "GoodWe_").
• Access the inverter's web interface via a browser (default IP address usually 192.168.1.1).
• Configure network settings to connect the inverter to your home Wi-Fi network.
• Register the inverter on the GoodWe monitoring platform (e.g., SEMS Portal) for remote monitoring.

ປະຕິບັດການ Inverter ໄດ້

1. ການເປີດເຄື່ອງເບື້ອງຕົ້ນ

After all connections are secure and verified:

1. Turn on the DC isolator switch for the PV array.
2. ເປີດເບກເກີຫມໍ້ໄຟ.
3. Turn on the AC breaker from the grid.
4. The inverter will perform a self-test and then begin operation. Observe the LED indicators on the front panel for status.

2. ການຕິດຕາມ

Monitor the inverter's performance via the integrated web server or the GoodWe monitoring app/platform. Key parameters to observe include:

• PV power generation
• Battery charge/discharge status
• Grid interaction (export/import)
• ການບໍລິໂພກການໂຫຼດ
• System status and error codes

3. ຂັ້ນຕອນການປິດເຄື່ອງ

To safely shut down the inverter:

1. Turn off the AC breaker from the grid.
2. ປິດເບກເກີແບດເຕີຣີ້.
3. Turn off the DC isolator switch for the PV array.
4. Wait for all indicators on the inverter to turn off.

ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງ inverter ຂອງທ່ານ.

• ປະຈໍາເດືອນ: Visually inspect the inverter and wiring for any signs of damage, corrosion, or loose connections. Ensure ventilation openings are clear of dust and debris.
• ປະຈໍາປີ: Have a qualified technician perform a thorough inspection, including checking electrical connections, torque settings, and system performance. Clean the inverter's heat sink if necessary.
• Keep the area around the inverter clean and free from obstructions.

ການແກ້ໄຂບັນຫາ

This section provides basic troubleshooting steps for common issues. For complex problems, contact GoodWe technical support or a certified installer.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

GoodWe products typically come with a standard warranty. Please refer to your purchase documentation or the official GoodWe webເວັບໄຊສຳລັບເງື່ອນໄຂການຮັບປະກັນສະເພາະທີ່ນຳໃຊ້ກັບພາກພື້ນ ແລະຮູບແບບຂອງທ່ານ.

For technical support, warranty claims, or further assistance, please contact your installer or the official GoodWe support channels:

• GoodWe ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.goodwe.com
• SEMS Portal (Monitoring): www.semsportal.com
• Refer to the contact information provided with your product or on the GoodWe webສະຖານທີ່ສໍາລັບຕົວເລກສະຫນັບສະຫນູນພາກພື້ນ.