Qiilu EM50SP 3960W Electric Motorcycle ECU Sine Controller Instruction Manual

1. ການແນະນໍາ ແລະຫຼາຍກວ່າview

This manual provides essential information for the installation, operation, and maintenance of the Qiilu EM50SP 3960W Electric Motorcycle ECU Sine Controller. This controller is designed to effectively manage electric motors, enhancing speed and power for electric motorcycles and similar vehicles. It features PC programmability and an IP67 waterproof rating, ensuring reliable performance in various conditions.

The controller is specifically designed for compatibility with QS wheel hub motors and QS medium drive motors. For other motor types, self-testing is required to ensure proper function.

2. ຂໍ້ມູນຄວາມປອດໄພ

ສຳຄັນ: Read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• ໃຫ້ແນ່ໃຈວ່າແຫຼ່ງພະລັງງານທັງໝົດຖືກຕັດການເຊື່ອມຕໍ່ກ່ອນການຕິດຕັ້ງ ຫຼື ການບຳລຸງຮັກສາ.
• Installation should be performed by qualified personnel with experience in electrical systems.
• Do not expose the controller to extreme temperatures or corrosive environments beyond its specified operating conditions.
• ກວດສອບວ່າການເຊື່ອມຕໍ່ທັງໝົດປອດໄພ ແລະ ຖືກຕ້ອງກ່ອນທີ່ຈະໃຊ້ໄຟຟ້າ.
• The controller is IP67 rated for water and dust resistance; however, avoid intentional submersion or high-pressure water jets.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• 1 x ECU Sine Controller
• 3 x Wiring Harnesses
• 5 x screws ຂະຫນາດໃຫຍ່
• 4 x screws ຂະຫນາດນ້ອຍ

Image: The complete Qiilu ECU Sine Controller kit, showing the main controller unit, three wiring harnesses, and a set of mounting screws.

4. ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ: ເທິງແລະລຸ່ມ views of the controller, highlighting its robust construction and connection interfaces.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The controller is designed for use with QS wheel hub motors and QS medium drive motors. Ensure your motor is compatible or perform necessary testing if using other motor types.

5.1 ການເຊື່ອມຕໍ່ສາຍໄຟ

Connect the wiring harnesses to the controller and your electric vehicle's components according to the following guidelines:

• Hall Plug: Connect the Hall sensor wires from your motor to the corresponding Hall plug on the controller.
• Throttle (0-5V): Connect your vehicle's throttle input to the designated throttle port on the controller. This typically operates within a 0-5V range.
• High Brake (12V): Connect the high brake signal (12V) to the controller's brake input.
• Reverse Drive: Connect the reverse drive switch or signal as required for reverse functionality.
• Low Speed (0V): The controller supports low speed operation when the voltage ແມ່ນ 0.

Image: The various wiring harnesses and mounting screws provided for connecting the controller to your electric vehicle's system.

5.2 ການຕິດຕັ້ງ

Securely mount the controller using the provided screws in a location that allows for adequate ventilation and protection from physical damage. Ensure all connections are firm and properly insulated.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Once properly installed, the controller manages the electric motor's functions based on your vehicle's inputs.

• ການຄວບຄຸມມໍເຕີ: The controller efficiently manages the motor's power output, enhancing speed and overall performance.
• ສາມາດຕັ້ງໂປຣແກຣມ PC ໄດ້: The controller supports PC programming, allowing for customization of various parameters. This includes adjusting motion models, parking functions, anti-theft features, and magnetic flux attenuated current settings. Refer to the specific PC software documentation for detailed programming instructions.
• ຟັງຊັນປະສົມປະສານ: The controller supports functions such as reverse drive, braking, and low-speed operation, integrating seamlessly with your vehicle's control system.

Image: An electric motorcycle shown with the controller and wiring, demonstrating the product's intended use in an electric vehicle.

7. ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your Qiilu ECU Sine Controller, follow these maintenance guidelines:

• ການກວດກາປົກກະຕິ: Periodically inspect the controller and all wiring connections for any signs of wear, damage, or corrosion.
• ທໍາຄວາມສະອາດ: Keep the controller clean and free from dirt, dust, and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
• ການປົກປ້ອງສິ່ງແວດລ້ອມ: Although IP67 rated, ensure the controller is not continuously exposed to harsh weather conditions or extreme temperatures.
• ການອັບເດດເຟີມແວ: If available, regularly check for and apply any firmware updates provided by the manufacturer to ensure the controller operates with the latest features and bug fixes.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your controller, consider the following basic troubleshooting steps:

• ບໍ່ມີພະລັງງານ: Check all power connections, including the battery and ignition switch. Ensure the battery voltage is within the specified 72V range.
• ມໍເຕີບໍ່ຕອບສະໜອງ: Verify that the throttle input is correctly connected and functioning. Check Hall sensor connections for proper seating.
• ພຶດຕິກຳທີ່ຜິດພາດ: Inspect all wiring for loose connections or damage. Ensure no wires are short-circuiting.
• ບັນຫາການຂຽນໂປຼແກຼມ: If experiencing problems with PC programming, ensure the correct software and drivers are installed and that the connection cable is secure.

If problems persist after performing these checks, it is recommended to consult a qualified technician or contact customer support.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ, ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ຫຼື ການສອບຖາມກ່ຽວກັບການບໍລິການ, ກະລຸນາອ້າງອີງເອກະສານທີ່ສະໜອງໃຫ້ໃນເວລາຊື້ ຫຼື ຕິດຕໍ່ຮ້ານຄ້າປີກຂອງທ່ານ. ເກັບໃບຮັບເງິນຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.