ຄູ່ມືການໃຊ້ງານຕິດຕັ້ງໂທລະພາບ PERLESMITH ສຳລັບຕິດຝາຜະໜັງ

ແນະນຳ

This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ຄຳເຕືອນ: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
• ໃຫ້ແນ່ໃຈວ່າໂຄງສ້າງກໍາແພງສາມາດຮອງຮັບນ້ໍາຫນັກລວມຂອງ mount ແລະໂທລະທັດຂອງທ່ານໄດ້ຢ່າງປອດໄພ.
• Always use an assistant for lifting and positioning the television.
• ຢ່າຮັບນ້ຳໜັກເກີນສູງສຸດທີ່ລະບຸໄວ້ສຳລັບແຕ່ລະຮຸ່ນຂອງຕົວຍຶດ.
• ກວດສອບຈຸດເຊື່ອມຕໍ່ ແລະ ຕົວຍຶດທັງໝົດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຍັງຄົງປອດໄພ.

ເນື້ອໃນຊຸດ

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.

PSMFK7 Full Motion TV Wall Mount Components

Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.

• Full Motion Wall Plate Assembly
• ວົງເລັບໂທລະທັດ (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• ລະດັບຟອງ
• ສາຍເຄເບີ້ນ

PSMTK1 Tilting TV Wall Mount Components

Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.

• Tilting Wall Plate
• ວົງເລັບໂທລະທັດ (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• ລະດັບຟອງ
• ສາຍເຄເບີ້ນ

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

1. ການກວດສອບການຕິດຕັ້ງກ່ອນ

1. ກວດສອບຄວາມເຂົ້າກັນໄດ້ຂອງໂທລະພາບ:
       For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
       For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
   

   Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
2. ລະບຸປະເພດຝາ: This mount is designed for installation on single wood studs, solid concrete, or brick walls. ຢ່າຕິດຕັ້ງໃສ່ drywall ຢ່າງດຽວ.
3. Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.

2. ການຕິດຕັ້ງຂາຕັ້ງໂທລະທັດເຂົ້າກັບໂທລະທັດ

1. ຄ່ອຍໆວາງໂທລະທັດຂອງທ່ານໃຫ້ຫງາຍໜ້າລົງເທິງພື້ນຜິວທີ່ອ່ອນ ແລະ ສະອາດ.
2. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.

3. ການຕິດຕັ້ງແຜ່ນຕິດຝາ

1. Determine the desired height for your TV. Mark the drilling locations on the wall.
2. For Wood Stud Installation: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
3. For Concrete/Brick Wall Installation: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
4. Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.

4. ການຕິດຕັ້ງໂທລະພາບໃສ່ແຜ່ນຕິດຝາ

1. With an assistant, carefully lift the TV with the attached brackets.
2. Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
3. For PSMFK7: ຍຶດໂທລະພາບໃຫ້ແໜ້ນກັບຕົວຍຶດໂດຍໃຊ້ສະກູຄວາມປອດໄພ ຫຼື ກົນໄກລັອກທີ່ມີໃຫ້.
4. For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.


Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.

ການໃຊ້ຕົວຍຶດໂທລະທັດຂອງທ່ານ

PSMFK7 Full Motion Mount Adjustments

Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.

• ການປັບຕົວອຽງ: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
• ການປັບການຫມຸນ: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewມຸມ ing.
• ສ່ວນຂະຫຍາຍ/ການຖອນຄືນ: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile ເບິ່ງ.
• ການປັບລະດັບ: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.

PSMTK1 Tilting Mount Adjustments

• ການປັບຕົວອຽງ: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
• ກົນໄກການລັອກ: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.

ບໍາລຸງຮັກສາ

• ກວດເບິ່ງທຸກໆສະກູແລະສະລັອດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນແຫນ້ນແລະປອດໄພ.
• ເຮັດຄວາມສະອາດ mount ດ້ວຍຜ້າອ່ອນ, ແຫ້ງ. ຫຼີກເວັ້ນການນໍາໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• Ensure no cables are pinched or stressed by the mount's movement.

ການແກ້ໄຂບັນຫາ

• ໂທລະ​ພາບ​ບໍ່​ແມ່ນ​ລະ​ດັບ​: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
• Mount ຮູ້ສຶກວ່າງ: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
• Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
• ພາກສ່ວນທີ່ຂາດຫາຍໄປ: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.

• Webເວັບໄຊ: www.perlesmith.com (ລິ້ງສົມມຸດຕິຖານ, ກະລຸນາປ່ຽນດ້ວຍລິ້ງຕົວຈິງຖ້າມີ)
• ອີເມວ: support@perlesmith.com (Hypothetical email, please replace with actual if available)
• ໂທລະສັບ: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)