Vssoplor USB Receiver Instruction Manual

1. ບົດແນະນຳ

This manual provides instructions for the Vssoplor USB Receiver, designed to establish a wireless connection between specific Vssoplor keyboards and mice and your computer. This receiver is a replacement part for lost or damaged original receivers and is not a universal device.

Image 1: The Vssoplor USB Receiver. This small, black and silver dongle connects to your computer's USB port to enable wireless communication with compatible Vssoplor peripherals.

2. ຄວາມເຂົ້າກັນໄດ້

This USB receiver is specifically designed for the following Vssoplor wireless keyboard and mouse models:

• ASIN: B07JJGCSHR
• ASIN: B07TTFV3YZ
• ASIN: B07VJXFFJW
• ASIN: B086JLBGYV
• ASIN: B0B71HMJ6Y

ສຳຄັນ: ຕົວຮັບນີ້ແມ່ນ ບໍ່ compatible with other keyboard or mouse models, including Vssoplor products not listed above. Please verify your device's ASIN before attempting to pair.

ຮູບພາບ 2: ຕົວຢ່າງample of a compatible Vssoplor wireless keyboard and mouse set. The receiver facilitates the connection between these peripherals and your computer.

3. ຄຳແນະນຳໃນການຕິດຕັ້ງ ແລະ ການຈັບຄູ່

Follow these steps carefully to pair your Vssoplor wireless keyboard and mouse with the USB receiver. It is recommended to pair the keyboard first, then the mouse.

3.1. Pairing the Keyboard

1. Ensure your Vssoplor keyboard is powered on.
2. ກົດຄ້າງໄວ້ ESC ທີ່​ສໍາ​ຄັນ​ແລະ​ Q key simultaneously on the keyboard to enter pairing mode. The indicator light on the keyboard will begin flashing.
3. ສຽບຕົວຮັບ USB ເຂົ້າໄປໃນພອດ USB ທີ່ມີຢູ່ໃນຄອມພິວເຕີຂອງທ່ານ.
4. Place the keyboard as close as possible to the USB receiver.
5. Wait for a short period until the indicator light on the keyboard stops flashing. This indicates successful pairing.

3.2. Pairing the Mouse

1. Ensure your Vssoplor mouse is powered on.
2. ກົດຄ້າງໄວ້ middle scroll wheel button ແລະ ຄລິກຂວາປຸ່ມ ພ້ອມໆກັນ.
3. Continue holding these buttons for approximately 2 seconds to enter pairing mode.
4. Place the mouse as close as possible to the USB receiver.
5. Release the buttons once the mouse pairs.

Image 3: Text detailing the pairing process for the keyboard and mouse. This visual aid reinforces the written instructions.

4. ການແກ້ໄຂບັນຫາ

• ລົ້ມເຫລວໃນການຈັບຄູ່: If the pairing process does not succeed, turn off all other wireless devices in the vicinity (e.g., Wi-Fi routers, Bluetooth devices, other wireless peripherals) to minimize interference. Then, repeat the entire pairing process, ensuring the keyboard is paired first, followed by the mouse.
• No Response After Pairing: Ensure the keyboard and mouse have fresh batteries or are fully charged. Verify the USB receiver is securely inserted into a functional USB port on your computer. Try a different USB port if necessary.
• ການເຊື່ອມຕໍ່ແບບບໍ່ຢຸດຢັ້ງ: Move the keyboard and mouse closer to the USB receiver. Obstructions between the devices and the receiver can weaken the signal.
• Incorrect Device Recognition: Confirm that your keyboard and mouse are among the compatible Vssoplor models listed in Section 2. This receiver is not universal.

5. ຂໍ້ມູນຈໍາເພາະ

6. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support regarding your Vssoplor USB Receiver or compatible peripherals, please refer to the documentation included with your original keyboard and mouse set or visit the official VssoPlor website. You may also contact VssoPlor customer service directly for assistance.

ຊັບພະຍາກອນອອນໄລນ໌:

• VssoPlor Store on Amazon: ເຂົ້າເບິ່ງຮ້ານຄ້າ