Amazon Basics Keyless Entry Door Lock Deadbolt User Manual

ແນະນຳ

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Amazon Basics Keyless Entry Door Lock Deadbolt. Designed for convenience and security, this electronic keypad deadbolt offers keyless access with customizable security codes and an automatic locking feature. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• Electronic Keypad Deadbolt Assembly (Exterior and Interior Units)
• ກົນໄກການ Latch
• ແຜ່ນປະທ້ວງ
• Screw Pack
• Keys (for traditional key option)
• ແມ່ແບບການຕິດຕັ້ງ

The image above displays the complete set of parts you should find in your product package, including the electronic keypad unit, the interior deadbolt assembly, the latch, strike plate, screws, and traditional keys.

ຕັ້ງຄ່າ

ກ່ອນທີ່ຈະຕິດຕັ້ງ

• Ensure your door thickness is between 1-3/8 to 1-3/4 inches (35mm to 44mm).
• Verify the backset (distance from door edge to center of bore hole) is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• Prepare the necessary tools: Phillips head screwdriver, tape measure, pencil.
• The lock requires 4 AA batteries (not included). Install fresh batteries before final assembly.

ຂັ້ນຕອນການຕິດຕັ້ງ

Follow these general steps for installation. For detailed, step-by-step instructions, refer to the included printed manual or the official ການຮັບປະກັນ (PDF) document which often contains installation guides.

1. ກະກຽມປະຕູ: Use the provided installation template to mark and drill holes if your door is not pre-drilled. Ensure the correct backset is selected.



The template provides clear markings for drilling holes, ensuring proper alignment for the deadbolt mechanism and keypad. It supports both 60mm and 70mm backsets.

2. ຕິດ​ຕັ້ງ Latch ໄດ້​: Insert the latch into the door edge, ensuring the correct orientation for your door swing. Secure it with screws.
3. ຕິດຕັ້ງສະພາແຫ່ງພາຍນອກ: Place the exterior keypad assembly onto the door, aligning the spindle through the latch.
4. Install the Interior Mounting Plate: Secure the interior mounting plate to the exterior assembly using screws, ensuring it is flush against the door.
5. ຕິດຕັ້ງສະພາແຫ່ງພາຍໃນ: ເຊື່ອມຕໍ່ສາຍໄຟຈາກຊຸດພາຍນອກເຂົ້າກັບຊຸດພາຍໃນ. ຕິດຕັ້ງຊຸດພາຍໃນເຂົ້າກັບແຜ່ນຍຶດ.



This image shows the electronic keypad deadbolt installed on the exterior side of a door, ready for operation. The matte black finish blends seamlessly with the door.



ຂ້າງ view illustrates how the deadbolt integrates with the door frame, providing a secure locking mechanism. The internal components are neatly concealed.

6. ຕິດຕັ້ງ ໝໍ້ ໄຟ: Remove the battery cover on the interior assembly and insert 4 new AA batteries, observing polarity. Replace the cover.
7. ປະຕິບັດຂະບວນການມອບປະຕູ: This step calibrates the lock to your door's orientation. Follow the specific instructions in your printed manual for this crucial step.

ຄໍາແນະນໍາການດໍາເນີນງານ

ລະຫັດຜູ້ໃຊ້ການຂຽນໂປຼແກຼມ

Your deadbolt comes with a default programming code. You will use this code to set up to 6 unique user codes for family members or temporary single-use codes for guests. Refer to your printed manual for the exact sequence of button presses to add, delete, or modify user codes.

ການລັອກແລະປົດລັອກ

The lock can be operated using the keypad or a traditional key.

• ລັອກ: ກົດ ລັອກ button (top right button with lock icon) on the keypad. The deadbolt will extend.
• ເພື່ອປົດລັອກ: Enter your valid user code, then press the ປົດລັອກ button (top left button with unlock icon). The deadbolt will retract.
• ລັອກອັດຕະໂນມັດ: The deadbolt features an automatic locking function, which can be set to engage 10 to 99 seconds after entry. This provides added peace of mind, ensuring your door is always secured.
• ການ​ປະ​ຕິ​ບັດ​ຄູ່​ມື​: From the interior, the deadbolt can be manually locked or unlocked using the thumb turn. From the exterior, a traditional key can be used as a backup.

The keypad features illuminated numbers for easy visibility in low light conditions, along with dedicated lock and unlock buttons at the top. The traditional keyhole is located below the keypad.

ບໍາລຸງຮັກສາ

ການປ່ຽນແບັດ

The electronic deadbolt is powered by 4 AA batteries. When the batteries are low, the lock may emit a warning sound or the keypad lights may flash. To replace the batteries:

1. Remove the battery cover located on the interior side of the deadbolt assembly. This cover typically slides upwards or detaches with a gentle pull.
2. ເອົາແບັດເກົ່າອອກຢ່າງລະມັດລະວັງ.
3. ໃສ່ໝໍ້ໄຟ AA ໃໝ່ 4 ອັນ, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
4. Replace the battery cover, making sure it clicks securely into place.

Regularly check battery levels to ensure uninterrupted operation. High usage may require more frequent battery changes.

ທໍາຄວາມສະອາດ

ທຳຄວາມສະອາດແປ້ນພິມ ແລະ ຕົວລັອກດ້ວຍຜ້າທີ່ອ່ອນນຸ້ມ.amp ຜ້າ. ຫຼີກລ່ຽງການໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍຊັ້ນເຄືອບ ແລະ ອົງປະກອບເອເລັກໂຕຣນິກໄດ້.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your Amazon Basics Keyless Entry Door Lock Deadbolt, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Amazon Basics customer support for further assistance.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information regarding your Amazon Basics Keyless Entry Door Lock Deadbolt, please refer to the official warranty document provided with your product or available online:

ດາວໂຫຼດການຮັບປະກັນ (PDF)

For additional support, troubleshooting assistance, or to inquire about replacement parts, please visit the ຮ້ານ Amazon Basics ຫຼື ຕິດຕໍ່ບໍລິການລູກຄ້າຂອງ Amazon ໂດຍກົງ.