Phiaton BonoBuds Bluetooth Earbuds

ແນະນຳ

Welcome to the user manual for your Phiaton BonoBuds. These Bluetooth earbuds are designed to provide an immersive audio experience with digital hybrid active noise canceling, clear call quality, and long-lasting battery life. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your BonoBuds to ensure optimal performance and enjoyment.

ຕັ້ງຄ່າ

1. ການສາກຫູຟັງ ແລະ ເຄສ

Before first use, fully charge your BonoBuds and their charging case. Place the earbuds into the charging case, ensuring they are correctly seated. The case can be charged using a USB-C cable (not included) connected to a power source. The LED indicator on the case will show charging status.

Image: Phiaton BonoBuds in their charging case, ready for initial charge.

2. ການຈັບຄູ່ເບື້ອງຕົ້ນ

1. Ensure both earbuds are charged and inside the charging case.
2. ເປີດກ່ອງສາກໄຟ. ຫູຟັງເອຍບັດຈະເຂົ້າສູ່ໂໝດການຈັບຄູ່ໂດຍອັດຕະໂນມັດ, ສະແດງໂດຍໄຟ LED ກະພິບຢູ່ຫູຟັງ.
3. ໃນອຸປະກອນຂອງທ່ານ (ໂທລະສັບສະຫຼາດ, ແທັບເລັດ, ຄອມພິວເຕີ), ໄປທີ່ການຕັ້ງຄ່າ Bluetooth ແລະເປີດ Bluetooth.
4. Select "Phiaton BonoBuds" from the list of available devices.
5. ເມື່ອເຊື່ອມຕໍ່ແລ້ວ, ໄຟ LED ເທິງຫູຟັງຈະຢຸດກະພິບ.

ສໍາລັບການນໍາໃຊ້ຕໍ່ໄປ, ຫູຟັງເອຍບັດຈະເຊື່ອມຕໍ່ກັບອຸປະກອນທີ່ຈັບຄູ່ສຸດທ້າຍໂດຍອັດຕະໂນມັດເມື່ອເອົາອອກຈາກເຄສ.

ຄໍາແນະນໍາການດໍາເນີນງານ

ແຕະການຄວບຄຸມ

The BonoBuds feature intuitive touch controls for easy management of your audio and calls.

Image: Demonstrating the intuitive touch controls on the Phiaton BonoBuds.

• ຫຼິ້ນ/ຢຸດ: ແຕະເທື່ອດຽວໃສ່ຫູຟັງຫູຟັງ.
• ເພງຕໍ່ໄປ: ແຕະສອງເທື່ອໃສ່ຫູຟັງເບື້ອງຂວາ.
• ຕິດຕາມກ່ອນ ໜ້າ ນີ້: ແຕະສອງເທື່ອໃສ່ຫູຟັງທາງຊ້າຍ.
• ຮັບ/ສາຍໂທ: ແຕະເທື່ອດຽວໃສ່ຫູຟັງຫູຟັງ.
• ປະຕິເສດການໂທ: ກົດຄ້າງໃສ່ຫູຟັງທັງສອງຂ້າງ.
• ກະຕຸ້ນຜູ້ຊ່ວຍສຽງ: ແຕະສາມເທື່ອໃສ່ຫູຟັງຫູຟັງ.
• ສະຫຼັບໂໝດ ANC/ຄວາມໂປ່ງໃສ: ກົດຄ້າງໄວ້ທີ່ຫູຟັງຂ້າງຂວາ.

Digital Hybrid Active Noise Canceling (ANC)

The BonoBuds utilize Digital Hybrid ANC technology to effectively reduce ambient noise. This system uses both internal and external microphones to detect and cancel a wide range of frequencies, providing an immersive listening experience.

Image: Hybrid Active Noise Cancelling offers a genuinely immersive experience.

To toggle between ANC and Transparency modes, press and hold the right earbud. Transparency mode allows you to hear your surroundings while still enjoying your audio.

Immersive Sound and Call Quality

Equipped with 12mm dynamic drivers, the BonoBuds deliver rich and clear audio. For calls, the integrated 4-microphone system ensures crystal clear voice transmission, minimizing background noise for both you and the person on the other end.

Image: Phiaton Sound Technology featuring custom-made 12mm Dynamic Drivers.

Image: Hear clearly, Speak confidently with 4 microphones for crystal clear call quality.

ຊີວິດຫມໍ້ໄຟ

The BonoBuds provide up to 20 hours of battery life with the charging case, ensuring your music and calls last throughout the day. A quick charge feature allows for rapid power replenishment.

Image: Quick Charge & 20 Hour Battery for all-day use.

ວິດີໂອຜະລິດຕະພັນ

ບໍາລຸງຮັກສາ

Cleaning Your BonoBuds

To maintain optimal sound quality and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth to wipe down the surfaces. For ear tips, remove them from the earbuds and clean with a damp ຜ້າ, ຮັບປະກັນວ່າພວກມັນແຫ້ງຫມົດກ່ອນທີ່ຈະຕິດໃຫມ່. ຫຼີກເວັ້ນການນໍາໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືວັດສະດຸຂັດ.

ການເກັບຮັກສາ

When not in use, store your BonoBuds in their charging case to protect them from dust, dirt, and physical damage. Store the case in a cool, dry place away from direct sunlight and extreme temperatures.

ການຕໍ່ຕ້ານນ້ໍາ

The BonoBuds are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. This makes them suitable for workouts and light rain. However, they are not designed for submersion in water or exposure to pressurized water jets. Do not wear them while swimming or showering.

ການແກ້ໄຂບັນຫາ

If you encounter any issues with your Phiaton BonoBuds, please refer to the following common solutions:

• ຫູຟັງບໍ່ຈັບຄູ່:

  Ensure both earbuds are fully charged. Place them back in the charging case, close the lid for 5 seconds, then open it again to re-enter pairing mode. On your device, forget the "Phiaton BonoBuds" from your Bluetooth list and attempt to pair again.
• ບໍ່ມີສຽງຈາກຫູຟັງອັນໜຶ່ງ:

  Check if both earbuds are charged. Place both earbuds back into the charging case, close the lid, and then take them out again. This often re-syncs them. If the issue persists, try resetting the earbuds (refer to the full product manual for specific reset instructions if available, or try the "forget device" method above).

• ບັນຫາການສາກໄຟ:

  Ensure the charging cable is securely connected to both the case and the power source. Try a different USB-C cable and power adapter. Clean the charging contacts on both the earbuds and inside the case with a dry cotton swab.

• ຄຸນນະພາບການໂທບໍ່ດີ:

  Ensure the microphones are not obstructed. Check your device's network signal. If using ANC, try disabling it to see if it improves call clarity in certain environments.

For more complex issues or if the above steps do not resolve the problem, please contact Phiaton customer support.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

Phiaton BonoBuds come with a standard manufacturer's warranty covering defects in materials and workmanship. Please refer to the warranty card included in your product packaging or visit the official Phiaton webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດສະເພາະກັບພາກພື້ນຂອງທ່ານ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, product inquiries, or warranty claims, please contact Phiaton customer support through their official website or the contact information provided in your product documentation. Have your model number (PPU-TN0610BK01) and proof of purchase ready when contacting support.

You can find more information and support resources on the official Phiaton webເວັບໄຊ: www.phiaton.com