1. ບົດແນະນຳ
The Xetron STC-1000Pro is a versatile digital temperature controller designed for precise temperature management in various environments. It features dual outlets for simultaneous heating and cooling control, a wide temperature range, and user-friendly operation. This manual provides detailed instructions for setting up, operating, and maintaining your device.
Figure 1: Xetron STC-1000Pro Digital Temperature Controller. This image displays the main unit with its digital display, control buttons, power cord, temperature sensor, and the dual-outlet power strip for heating and cooling devices.
ຄໍາຮ້ອງສະຫມັກ
The STC-1000Pro is suitable for a wide range of applications requiring accurate temperature control, including:
- Reptile enclosures and terrariums
- ການຜະລິດເບຍ ແລະ ການໝັກຢູ່ເຮືອນ
- ຕູ້ອົບ
- ເຮືອນແກ້ວ
- ຕູ້ປາ
- ຕູ້ເຢັນ
Figure 2: Common applications for the Xetron STC-1000Pro. This image illustrates the controller's use in home brewing, incubators, aquariums, and flower cultivation, highlighting its versatility.
2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Ideal Temperature Control: Two outlets allow simultaneous or separate connection of heating and cooling equipment for automatic temperature switching. Wide control range of -40 to 230 ℉ (-40 to 110 ℃) with a temperature accuracy of ±1 ℃ / ±2 ℉.
- ການອອກແບບທີ່ເປັນມິດກັບຜູ້ໃຊ້: Simple 3-button operation and pre-wired design for plug-and-play functionality. Large display for easy real-time data reading.
- ລະບົບປຸກສອງ: Adjustable high/low temperature alarms with audible beeps and a bell icon on the display, ensuring timely alerts even when not near the device.
- Customizable Parameters: Supports settings for ℃/℉ unit switching, temperature calibration, high and low alarm values, start delay, and protection time (cooling mode only).
- ຄວາມປອດໄພ ແລະຄຸນນະພາບ: Constructed from V-0 flame-retardant ABS material. Features compressor delay protection and complies with CE and FCC standards for safe operation.
- IP65 Waterproof Probe: The temperature probe head can be immersed in fresh water, and the main unit features an internal rubber ring to prevent water ingress.
Figure 3: Temperature control range of the Xetron STC-1000Pro. This image highlights the controller's ability to maintain temperatures within a desired range of -40 to 230 ℉ using both cooling and heating devices.
Figure 4: Large screen display of the Xetron STC-1000Pro. The image shows the display dimensions and labels for PV (Present Value), SV (Set Value), Csp (Cooling Start Point), and Hsp (Heating Start Point), indicating ℃/℉ switchability.
Figure 5: Visual and audible alert features. This image illustrates the double alarm and delay protection functionalities of the controller, enhancing safety and monitoring.
Figure 6: Safety and quality certifications. The image highlights the V-0 flame-retardant ABS material and compliance with CE, FCC, and RoHS standards, ensuring product safety.
Figure 7: IP65 waterproof features. This image demonstrates the waterproof capability of the temperature probe, which can be immersed in fresh water, and the internal rubber ring for main unit protection.
3. ຄໍາແນະນໍາການຕິດຕັ້ງ
- ຖອດອຸປະກອນອອກ: Carefully remove the Xetron STC-1000Pro controller and its components from the packaging.
- ເຊື່ອມຕໍ່ເຊັນເຊີ: Ensure the temperature sensor is fully inserted into its dedicated port on the side of the controller. A loose connection can lead to "ERR" display.
- ຈັດຕຳແໜ່ງເຊັນເຊີ: Place the temperature probe in the environment where temperature monitoring and control are required. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
- ເຊື່ອມຕໍ່ອຸປະກອນເຮັດຄວາມຮ້ອນ/ເຮັດຄວາມເຢັນ:
- ສຽບອຸປະກອນເຮັດຄວາມຮ້ອນຂອງທ່ານ (ເຊັ່ນ: ຄວາມຮ້ອນ lamp, heating mat) into the socket labeled "HEATING".
- Plug your cooling device (e.g., fan, chiller) into the socket labeled "COOLING".
ສຳຄັນ: The maximum output for each socket is 10A at 240VAC. Do not connect high-power equipment exceeding these limits.
- ເປີດ: Plug the controller's main power cord into a standard 230V AC power outlet. The display will illuminate, showing the current temperature (PV) and other settings.
Figure 8: Plug-and-play setup of the Xetron STC-1000Pro. This image demonstrates the simplicity of connecting the controller, showing it mounted on a wall next to a terrarium, with heating/cooling devices plugged in.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
The STC-1000Pro features a simple 3-button interface: SET, ຂຶ້ນ (▲), ແລະ ລົງ (▼).
4.1 ການສະແດງຜົນເກີນview
- PV (Present Value): Displays the current measured temperature.
- SV (ຄ່າທີ່ກຳນົດໄວ້): Displays the target temperature you wish to maintain.
- Csp (Cooling Start Point): The temperature at which the cooling device will activate.
- Hsp (Heating Start Point): The temperature at which the heating device will activate.
4.2 Setting the Target Temperature (SV)
- ກົດ SET button once. The SV value will flash.
- ໃຊ້ ຂຶ້ນ (▲) or ລົງ (▼) ປຸ່ມເພື່ອປັບອຸນຫະພູມເປົ້າໝາຍ.
- ກົດ SET ອີກເທື່ອໜຶ່ງເພື່ອຢືນຢັນ ແລະບັນທຶກການຕັ້ງຄ່າ, ຫຼືລໍຖ້າສອງສາມວິນາທີເພື່ອໃຫ້ມັນບັນທຶກອັດຕະໂນມັດ.
4.3 Advanced Parameter Settings
To access advanced settings, press and hold the SET button for approximately 3 seconds until the display changes to show parameter codes.
Figure 9: Diagram illustrating parameter settings. This image shows the relationship between TS (Temperature Set-point), CD (Cooling Differential), HD (Heating Differential), Csp (Cooling Start Point), and Hsp (Heating Start Point).
ໃຊ້ ຂຶ້ນ (▲) or ລົງ (▼) buttons to navigate through the parameters. Press SET to enter a parameter's value, then use ຂຶ້ນ (▲) or ລົງ (▼) to adjust, and SET ອີກເທື່ອຫນຶ່ງເພື່ອຊ່ວຍປະຢັດ.
| ພາລາມິເຕີ | ລາຍລະອຽດ | ຊ່ວງ | ຄ່າເລີ່ມຕົ້ນ |
|---|---|---|---|
| TS (Temperature Set-point) | The desired target temperature (same as SV). | -40 to 110 ℃ / -40 to 230 ℉ | ແຕກຕ່າງກັນ |
| CD (Cooling Differential) | The difference between the cooling start point (Csp) and the set temperature (TS). Cooling activates when PV ≥ TS + CD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| HD (Heating Differential) | The difference between the heating start point (Hsp) and the set temperature (TS). Heating activates when PV ≤ TS - HD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| PT (Protection Time) | Compressor delay protection time (in minutes) for cooling mode only. Prevents frequent compressor cycling. | 0 ເຖິງ 10 ນາທີ | 3 ນາທີ |
| CA (Temperature Calibration) | Adjusts the temperature reading to match an external reference thermometer. | -10 to 10 ℃ / -18 to 18 ℉ | 0 ℃ / 0 ℉ |
| CF (Unit Switch) | Switches between Celsius (℃) and Fahrenheit (℉). | C/F | C |
| HA (High Alarm) | Sets the upper temperature limit for the alarm. | TS to 110 ℃ / TS to 230 ℉ | 110 ℃ / 230 ℉ |
| LA (Low Alarm) | Sets the lower temperature limit for the alarm. | -40 ℃ / -40 ℉ to TS | -40 ℃ / -40 ℉ |
After adjusting parameters, press and hold SET again for 3 seconds to exit the advanced settings menu and return to normal operation.
5. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Disconnect the power before cleaning. Wipe the controller's surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water. The temperature probe can be cleaned with water.
- ການເກັບຮັກສາ: Store the device in a dry environment within the temperature range of -20 ℃ to 75 ℃ (-4 ℉ to 167 ℉) to ensure the longest possible lifespan.
- ການດູແລເຊັນເຊີ: Ensure the temperature sensor cable is not pinched or damaged. A damaged sensor can lead to inaccurate readings or error messages.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| "ERR" displayed on screen | Temperature sensor not fully inserted or damaged; temperature exceeds measurement range. | Ensure the sensor is fully inserted into its port. If the issue persists, the sensor may be faulty and require replacement. If the temperature is outside the -40 to 110 ℃ range, the controller will display "ERR". |
| Alarm sounds and bell icon appears | Current temperature (PV) has exceeded the set high alarm (HA) or fallen below the low alarm (LA) threshold. | Check the environmental conditions. Adjust HA/LA settings if necessary. The controller will disable all outputs in fault alarm mode to protect equipment. |
| ອຸປະກອນເຮັດຄວາມຮ້ອນ/ເຮັດຄວາມເຢັນບໍ່ເປີດໃຊ້ງານ | Incorrect temperature settings (TS, CD, HD); compressor delay protection (PT) active; device not properly plugged in; device malfunction. | Verify TS, CD, and HD settings. Wait for the PT delay to expire in cooling mode. Ensure devices are securely plugged into the correct outlets. Test heating/cooling devices independently. |
| ການອ່ານອຸນຫະພູມບໍ່ຖືກຕ້ອງ | Sensor placement; temperature calibration (CA) offset. | Relocate the sensor to a more representative area. Use the CA parameter to calibrate the reading against a known accurate thermometer. |
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | XT-STC1000Pro-01US |
| ຍີ່ຫໍ້ | ເຊຕຣອນ |
| ສະບັບtage | 230V AC (Note: Product description mentions 230V, specifications mention 110V. User should verify their specific model's voltage requirements.) |
| ປະຈຸບັນຜົນໄດ້ຮັບສູງສຸດ | 10A ຕໍ່ເຕົ້າສຽບ |
| ໄລຍະການຄວບຄຸມອຸນຫະພູມ | -40 ℃ to 110 ℃ (-40 ℉ ຫາ 230 ℉) |
| ຄວາມຖືກຕ້ອງຂອງອຸນຫະພູມ | ±1 ℃ / ±2 ℉ |
| ປະເພດການສະແດງ | OLED |
| ວັດສະດຸ | Flame-retardant ABS Plastic |
| ຂະໜາດສິນຄ້າ (L x W x H) | 20 x 15 x 6 cm |
| ນ້ຳໜັກ | 400 ກຣາມ |
| ອຸນຫະພູມປະຕິບັດການ | ສູງສຸດ 110 ℃ |
| ອົງປະກອບລວມ | 1x Temperature Controller |
8. ຄໍາເຕືອນຄວາມປອດໄພ ແລະຂໍ້ຄວນລະວັງ
- ການໂຫຼດໄຟຟ້າ: Do not connect equipment with a total power consumption exceeding 10A (2400W at 240V) to each outlet. Overloading can cause damage to the controller and connected devices, and poses a fire hazard.
- ສະບັບtage ຄວາມເຂົ້າກັນໄດ້: Ensure the controller's voltage (230V) matches your local power supply.
- ການເປີດເຜີຍນ້ໍາ: While the probe is waterproof, the main controller unit is not designed for immersion. Avoid exposing the main unit to direct water spray or submersion.
- ຄວາມສົມບູນຂອງເຊັນເຊີ: Always ensure the temperature sensor is fully and securely inserted. A short-circuited or damaged sensor will trigger a fault alarm and disable outputs for protection.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: Keep the device and its cables out of reach of children and pets to prevent accidental damage or injury.
- ການລະບາຍອາກາດ: Ensure adequate ventilation around the controller to prevent overheating.
9. ສະຫນັບສະຫນູນແລະຂໍ້ມູນຕິດຕໍ່
For any questions, technical assistance, or customer service inquiries regarding your Xetron STC-1000Pro Digital Temperature Controller, please contact Xetron customer support. We are committed to providing satisfactory customer service.
Please refer to the product packaging or the retailer's webເວັບໄຊສໍາລັບລາຍລະອຽດການຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.