ແນະນຳ
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your WORKPRO 850W Jigsaw. Please read these instructions carefully before using the tool and keep them for future reference. Proper use and care will ensure optimal performance and extend the life of your jigsaw.
ຄໍາແນະນໍາຄວາມປອດໄພ
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This tool is designed for cutting wood, metal, and plastic. Do not use it for purposes other than those specified.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ: ໃສ່ແວ່ນຕານິລະໄພ, ປ້ອງກັນການໄດ້ຍິນ, ແລະໜ້າກາກຂີ້ຝຸ່ນສະເໝີ.
- ຮັບປະກັນ workpiece ໄດ້: ໃຫ້ແນ່ໃຈວ່າວັດສະດຸທີ່ຖືກຕັດນັ້ນຖືກຍຶດຢ່າງແໜ້ນໜາamped ຫຼືຮັບປະກັນເພື່ອປ້ອງກັນການເຄື່ອນໄຫວໃນລະຫວ່າງການປະຕິບັດງານ.
- ຮັກສາຄວາມສະອາດພື້ນທີ່ເຮັດວຽກ: ເຂດທີ່ວຸ້ນວາຍພາໃຫ້ເກີດອຸບັດຕິເຫດ.
- ຫຼີກເວັ້ນການເລີ່ມຕົ້ນໂດຍບັງເອີນ: ໃຫ້ແນ່ໃຈວ່າສະວິດຢູ່ໃນຕໍາແຫນ່ງ OFF ກ່ອນທີ່ຈະສຽບໃນເຄື່ອງມື.
- ບໍ່ເກີນ: ຮັກສາຄວາມດຸ່ນດ່ຽງແລະຕີນທີ່ຖືກຕ້ອງຕະຫຼອດເວລາ.
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Always unplug the tool before making any adjustments, changing accessories, or storing it.
- ກວດສອບເຄື່ອງມື: Before each use, check for damaged parts, proper alignment, and any other conditions that may affect its operation.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນການຍົກເລີກການຫຸ້ມຫໍ່:
- 1 x WORKPRO Jigsaw
- 7 x T-shank Saw Blades (1 for metal, 6 for wood)
- 1 x Guide Ruler
- 1 x Dust Extraction Pipe
- 1 x Hex Key
- 1 x ຄູ່ມືຜູ້ໃຊ້
ຮູບທີ 1: WORKPRO Jigsaw and its main components. This image displays the jigsaw with various parts labeled, including the lock-on button, on/off switch, hex key, speed control, LED light switch, dust cover, tool-free blade change mechanism, orbital settings, dust extraction tube, scale ruler, and the 1.8m power cord.
ຄຸນສົມບັດຜະລິດຕະພັນ
- ມໍເຕີທີ່ມີປະສິດທິພາບ: 850W motor with a maximum speed of 3000 SPM for efficient cutting.
- ການຄວບຄຸມຄວາມໄວຕົວແປ: 6 adjustable speeds for cutting various materials.
- ການຕັ້ງຄ່າວົງໂຄຈອນ: 4 orbital positions for adjusting cutting intensity.
- ການຕັດ Bevel: Base plate adjustable up to ±45° for angled cuts.
- ການປ່ຽນແປງແຜ່ນໃບຄ້າຍຄືບໍ່ມີເຄື່ອງມື: Quick and easy blade replacement.
- ແສງ LED ປະສົມປະສານ: ສ່ອງແສງສະຫວ່າງໃສ່ພື້ນທີ່ຕັດເພື່ອການເບິ່ງເຫັນທີ່ດີຂຶ້ນ.
- ການຈັດການຂີ້ຝຸ່ນ: Dust blowing and suction functions for a clear cutting line.
- ປຸ່ມລັອກ: Reduces fatigue during extended operation.
ຮູບທີ 2: ເກີນview of WORKPRO Jigsaw features. This image highlights the 850W power, 800-3000 RPM no-load speed, maximum cutting depth of 100mm in wood and 10mm in steel, and the integrated LED light for enhanced visibility.
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງແຜ່ນ
The jigsaw features a tool-free blade change system.
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງມືຖືກຖອດອອກຈາກແຫຼ່ງພະລັງງານ.
- ຫັນ clamping lever clockwise to open the blade clamp.
- Insert the T-shank saw blade fully into the clamp.
- ປ່ອຍຄັນໂຍກເພື່ອຮັດໃບມີດໃຫ້ແໜ້ນ. ຄ່ອຍໆດຶງໃບມີດເພື່ອຮັບປະກັນວ່າມັນຕັ້ງຢູ່ຢ່າງແໜ້ນໜາ.
ຮູບທີ 3: Tool-free blade change mechanism. This image illustrates the process of inserting a T-shank saw blade by turning the clamping lever clockwise and then releasing it to secure the blade. Different types of T-shank blades for metal and wood are also displayed.
2. Attaching the Dust Extraction Pipe
Attach the dust extraction pipe to the designated port at the rear of the jigsaw. Connect a vacuum cleaner hose to the pipe for efficient dust collection.
3. Using the Guide Ruler
Insert the guide ruler into the slot on the base plate. Adjust it to the desired cutting distance and tighten the screw to secure it. This helps achieve precise straight cuts.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. Power On/Off and Lock-on Button
- To start the jigsaw, press the On/Off switch.
- For continuous operation, press the lock-on button while the On/Off switch is depressed. Release the On/Off switch, and the tool will continue to run.
- To turn off the tool from continuous operation, press the On/Off switch again.
2. ການຄວບຄຸມຄວາມໄວຕົວແປ
The jigsaw features 6 speed settings, allowing you to match the cutting speed to the material and blade type.
- ຕຳ ແໜ່ງ 1-4: ພາດສະຕິກ
- ຕຳ ແໜ່ງ 2-3: ອາລູມີນຽມ
- ຕຳ ແໜ່ງ 3-4: ສະແຕນເລດ
- ຕຳ ແໜ່ງ 3-6: ແຜ່ນເຫຼັກ
- ຕຳ ແໜ່ງ 5-6: ໄມ້
ຮູບທີ 4: 6 Speeds Control for different materials. This image displays the jigsaw and a guide for selecting the appropriate speed setting (1-6) based on the material being cut, including plastic, aluminum, stainless steel, steel plate, and wood.
3. Orbital Settings
The 4 orbital settings adjust the blade's cutting action. Higher orbital settings provide faster, more aggressive cuts, suitable for softer materials. Lower settings are for finer, slower cuts in harder materials.
- ຕຳແໜ່ງ 0: Straight cut and precise
- ຕຳແໜ່ງ 1: Light orbital cut
- ຕຳແໜ່ງ 2: Medium orbital cut
- ຕຳແໜ່ງ 3: Aggressive orbital cut
ຮູບທີ 5: 4 Orbital Settings. This image shows the orbital setting dial on the jigsaw and describes the function of each position: 0 for straight and precise cuts, 1 for light orbital cuts, 2 for medium orbital cuts, and 3 for aggressive orbital cuts.
4. Bevel Cutting (±45°)
The base plate can be tilted up to 45 degrees left or right for bevel cuts.
- ຖອດເຄື່ອງມືອອກ.
- Loosen the screws on the base plate using the included hex key.
- Tilt the base plate to the desired angle (up to 45°).
- Tighten the screws firmly to secure the base plate in position.
ຮູບທີ 6: ±45° Bevel Cutting adjustment. This image illustrates the process of adjusting the base plate for angled cuts by loosening screws, tilting the plate to the desired angle (up to 45 degrees), and then tightening the screws with the hex key.
5. Dust Suction and Blowing Regulation
The jigsaw offers both dust blowing and suction functions to keep the cutting line clear.
- To activate dust suction (for connection to a vacuum cleaner), push the blower switch backward.
- To activate dust blowing (to clear debris from the cutting line), push the blower switch forward.
ຮູບທີ 7: Dust suction and dust blowing regulation. This image demonstrates how to control the dust management feature: pushing the switch backward activates dust suction (scrap absorbed into catheter), and pushing it forward activates dust blowing (scrap blown away).
ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປອດໄພຂອງເຄື່ອງມືຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: Keep the ventilation openings clear and clean. Use a soft brush or compressed air to remove dust and debris. Do not use water or chemical cleaners.
- ການດູແລແຜ່ນ: Replace dull or damaged blades promptly. Store blades properly to prevent damage.
- ການກວດກາສາຍໄຟ: ກວດສອບສາຍໄຟເປັນປະຈຳເພື່ອຫາຮ່ອງຮອຍຄວາມເສຍຫາຍ. ຖ້າເສຍຫາຍ, ໃຫ້ຊ່າງເຕັກນິກທີ່ມີຄຸນວຸດທິປ່ຽນແທນມັນ.
- ການລະບາຍສີ: ເຄື່ອງມືນີ້ຖືກອອກແບບມາເພື່ອການເຮັດວຽກທີ່ບໍ່ຕ້ອງມີການບຳລຸງຮັກສາ. ບໍ່ຕ້ອງມີການຫລໍ່ລື່ນເພີ່ມເຕີມ.
- ການເກັບຮັກສາ: ເກັບຮັກສາ jigsaw ໃນສະຖານທີ່ແຫ້ງ, ປອດໄພຫ່າງຈາກເດັກນ້ອຍ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງມືບໍ່ເລີ່ມຕົ້ນ | No power supply; Faulty switch; Damaged power cord. | Check power outlet and circuit breaker; Ensure switch is fully engaged; Inspect power cord for damage and replace if necessary. |
| ແຜ່ນຕັດບໍ່ມີປະສິດທິພາບ | Dull or incorrect blade; Incorrect speed/orbital setting; Workpiece not secured. | Replace blade with a sharp, appropriate type; Adjust speed and orbital settings for the material; Secure workpiece firmly. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ | ໃບມີດວ່າງ; ໃບມີດເສຍຫາຍ; ອົງປະກອບພາຍໃນທີ່ເສື່ອມສະພາບ. | ຮັບປະກັນແຜ່ນໃບຄ້າຍຄືຢ່າງປອດໄພ clamped; Replace damaged blade; If problem persists, contact customer support. |
| Dust not clearing | Dust port blocked; Blower switch in wrong position; Vacuum not connected/working. | Clear dust port; Adjust blower switch to desired function; Ensure vacuum is properly connected and operational. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | WorkPRO |
| ໝາຍເລກຕົວແບບ | W124749AU |
| ແຫຼ່ງພະລັງງານ | ໄຟຟ້າສາຍ (6.5 Amps) |
| ວັດtage | 850 W (1495 W max) |
| ຄວາມໄວທີ່ບໍ່ມີການໂຫຼດ | 800-3000 RPM (Strokes Per Minute) |
| ຄວາມຍາວຂອງເສັ້ນເລືອດຕັນ | 2 ຊຕມ |
| ການຕັ້ງຄ່າວົງໂຄຈອນ | ຕໍາ ແໜ່ງ 4 |
| ມຸມຕັດ Bevel | ±45° |
| ສູງສຸດ. ຄວາມເລິກຕັດ (ໄມ້) | 100 ມມ |
| ສູງສຸດ. ຄວາມເລິກການຕັດ (ເຫຼັກ) | 10 ມມ |
| ວັດສະດຸແຜ່ນໃບ | ເຫຼັກໂລຫະປະສົມ |
| ຂະໜາດສິນຄ້າ (LxWxH) | 22.4 x 21.3 x 21.3 cm |
| ນ້ຳໜັກສິນຄ້າ | 2.25 ກິໂລ |
| ການຢັ້ງຢືນ | CE |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The WORKPRO 850W Jigsaw comes with a limited lifetime warranty. For warranty claims, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official WORKPRO webເວັບໄຊ.
ກະລຸນາເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອກວດສອບການຮັບປະກັນ.