ຄູ່ມືຜູ້ໃຊ້

1. ບົດແນະນຳ

The RCYAGO BLE-9909 is a multi-parameter smart tester designed for precise measurement of pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, and Temperature. This device integrates Bluetooth connectivity, allowing seamless data synchronization with the YINMIK mobile application for enhanced data management and analysis. It is suitable for various applications including domestic drinking water, hydroponics, laboratory testing, and aquariums.

Figure 1: RCYAGO BLE-9909 Smart Tester in operation.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ການວັດແທກຫຼາຍພາລາມິເຕີ: Measures pH, TDS (ppm), EC (conductivity), Salinity (ppt), and Temperature.
• ການເຊື່ອມຕໍ່ Bluetooth: Compatible with the YINMIK mobile application for real-time data transmission and control.
• Cloud-Based Data Management: Enables easy saving, management, and sharing of test data, preventing data loss.
• Calibration ອັດຕະໂນມັດ: Features a 5-point calibration method for pH (Asian standard: pH 4.00, pH 6.86, pH 9.18; EU standard: pH 7.00, pH 10.01) ensuring high accuracy.
• High Sensitivity Glass Probe: Provides a full measurement range of 0-14 pH with 0.01 pH resolution.
• ຈໍສະແດງຜົນທີ່ສົມບູນແບບ: Large LCD screen displays multiple parameters simultaneously. App control allows for backlight adjustment.
• Customizable Limits: The mobile application allows setting upper and lower limits for pH and EC. Abnormal values are highlighted in red.

3. ອົງປະກອບຂອງຜະລິດຕະພັນ

Familiarize yourself with the components of your BLE-9909 tester:

ຮູບທີ 2: ລະເບີດ view of the BLE-9909 tester and its components.

• 3*1.5V Button Battery: ແຫຼ່ງພະລັງງານສໍາລັບອຸປະກອນ.
• ຈໍສະແດງຜົນ Backlit: LCD screen for reading measurements.
• Data Hold/Temperature Unit Conversion Key: Button to hold readings or switch temperature units.
• Function Conversion/Calibration Key: Button to switch measurement modes or initiate calibration.
• ປຸ່ມເປີດ/ປິດ: ປຸ່ມເປີດປິດ.
• Immersion Line: Indicates the minimum immersion depth for accurate readings.
• ຫມວກກັນກະທົບ: Covers and protects the electrodes when not in use.
• High-Precision Probe: Contains the sensors for measurement.

ຮູບທີ 3: ລາຍລະອຽດ view of the BLE-9909 electrodes.

• TDS/EC/Salinity Sensor: Measures Total Dissolved Solids, Electrical Conductivity, and Salinity.
• External Reference: Reference electrode for stable measurements.
• ເຊັນເຊີອຸນຫະພູມ: Measures the temperature of the solution.
• Glass PH Sensor: High-sensitivity sensor for pH measurements.

4. ຕັ້ງຄ່າ

4.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. Unscrew the battery compartment cap at the top of the device (refer to Figure 2).
2. Insert three 1.5V button batteries, ensuring correct polarity.
3. Securely screw the battery compartment cap back on.

4.2 Mobile App Connection (YINMIK App)

The BLE-9909 connects to your smartphone via Bluetooth for advanced features and data management.

1. Download the "YINMIK" mobile application from your device's app store (iOS App Store or Google Play Store).
2. ໃຫ້ແນ່ໃຈວ່າ Bluetooth ຖືກເປີດໃຊ້ຢູ່ໃນໂທລະສັບສະຫຼາດຂອງທ່ານ.
3. Turn on the BLE-9909 tester by pressing the "ON/OFF" key.
4. Open the YINMIK app. The app will automatically search for and connect to the BLE-9909 device.
5. Once connected, the app will display real-time measurement data.

Figure 4: Bluetooth data synchronization with the YINMIK mobile app.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການວັດແທກ

1. ເອົາຫມວກປ້ອງກັນອອກຈາກ electrode.
2. Rinse the electrode with distilled water and gently blot dry with a clean tissue.
3. Immerse the electrode into the solution to be tested, ensuring the immersion line is covered.
4. Gently stir the solution and wait for the reading to stabilize on the LCD screen.
5. Read the displayed values. The device will show pH, TDS/EC/Salinity, and Temperature.
6. After measurement, rinse the electrode thoroughly with distilled water and replace the protective cap.

5.2 ການປ່ຽນຮູບແບບການວັດແທກ

Press the "MODE/CAL" key to cycle through different measurement parameters (pH, TDS, EC, Salinity). The active parameter will be indicated on the display.

5.3 Data Hold and Temperature Unit Conversion

Press the "HOLD/TEMP" key to hold the current reading on the display. Press it again to release. Long-press the "HOLD/TEMP" key to switch between Celsius (°C) and Fahrenheit (°F) temperature units.

6. Calibration

Regular calibration ensures the accuracy of your pH measurements. The BLE-9909 supports a 5-point pH calibration.

6.1 Required Calibration Solutions

• Asian Standard: pH 4.00, pH 6.86, pH 9.18
• ມາດຕະຖານ EU: pH 7.00, pH 10.01

6.2 ຂັ້ນຕອນການສອບທຽບ

1. Prepare the calibration buffer solutions (e.g., pH 6.86, pH 4.00, pH 9.18 for Asian standard).
2. Turn on the tester and ensure it is in pH measurement mode.
3. ລ້າງ electrode ດ້ວຍນ້ໍາກັ່ນແລະເຊັດໃຫ້ແຫ້ງ.
4. Immerse the electrode into the first calibration solution (e.g., pH 6.86).
5. Press and hold the "MODE/CAL" key until "CAL" appears on the display. The device will automatically recognize the buffer solution.
6. Wait for the reading to stabilize and for the device to confirm calibration for that point.
7. Remove the electrode, rinse with distilled water, and blot dry.
8. Repeat steps 4-6 for the remaining calibration solutions in sequence.
9. Once all points are calibrated, the device will automatically exit calibration mode.

ໝາຍເຫດ: For best accuracy, calibrate regularly, especially after prolonged storage or if readings appear inconsistent.

7. Data Management and App Features

The YINMIK mobile application provides comprehensive data management and additional control features.

• ການສະແດງຂໍ້ມູນແບບສົດໆ: View all measured parameters simultaneously on your phone screen.
• ບັນທຶກຂໍ້ມູນ: Automatically save measurement data to the cloud, accessible anytime.
• ຂໍ້ມູນປະຫວັດສາດ Review: Browse past measurements, including time and date stamps.
• ໂມງປຸກທີ່ສາມາດປັບແຕ່ງໄດ້: Set upper and lower limits for pH and EC. The app will display values in red if they exceed these limits (see Figure 5).
• ການຄວບຄຸມໄຟຫຼັງ: Adjust the backlight of the device's LCD screen directly from the app.
• ການແບ່ງປັນຂໍ້ມູນ: Easily share your test results.

Figure 5: Setting custom measurement limits within the YINMIK app.

ຮູບ 6: ເກີນview of YINMIK app features including data display, settings, and historical records.

8. ບໍາລຸງຮັກສາ

8.1 Electrode Cleaning

After each use, rinse the electrode thoroughly with distilled or deionized water to prevent contamination and buildup. Do not wipe the glass bulb, as this can cause static electricity and damage the sensor. Gently blot dry with a lint-free tissue.

8.2 ການເກັບຮັກສາ

Always replace the protective cap after use. Ensure the sponge inside the cap remains moist with a few drops of pH storage solution or 3M KCl solution to keep the electrode hydrated. Never store the electrode dry or in distilled water, as this can shorten its lifespan.

8.3 ການທົດແທນຫມໍ້ໄຟ

When the display becomes dim or the device fails to power on, replace the batteries as described in Section 4.1.

9. ການແກ້ໄຂບັນຫາ

10. ຂໍ້ມູນຈໍາເພາະ

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please contact RCYAGO customer service through the official website or your point of purchase. Please have your model number (BLE-9909) and purchase date available when contacting support.

ຜູ້ຜະລິດ: RCYAGO

First Available Date on Amazon.es: ວັນທີ 24 ທັນວາ 2021