WORKPRO Cordless Grass Shear & Shrubbery Trimmer ຄູ່ມືຜູ້ໃຊ້

1. ບົດແນະນຳ

Thank you for choosing the WORKPRO Cordless Grass Shear & Shrubbery Trimmer. This 2-in-1 versatile tool is designed for efficient and comfortable trimming of grass, hedges, and small branches in your garden. Its lightweight and cordless design ensures ease of use and maneuverability.

ອົງປະກອບລວມ:

• ໜ່ວຍ Trimmer ຫຼັກ
• Grass Shear Blade (3.5 inches wide)
• Shrubbery Trimmer Blade (5.5 inches long)
• ສາຍສາກໄຟ USB Type-C
• ກະແຈຄວາມປອດໄພ
• ແຜ່ນປົກ

Figure 1: WORKPRO Cordless Grass Shear & Shrubbery Trimmer and accessories.

2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

ສະເຫມີໃຫ້ຄວາມສໍາຄັນດ້ານຄວາມປອດໄພໃນເວລາທີ່ປະຕິບັດການເຄື່ອງມືພະລັງງານ. ອ່ານແລະເຂົ້າໃຈຄໍາແນະນໍາທັງຫມົດກ່ອນທີ່ຈະນໍາໃຊ້.

• ການປົກປ້ອງຄວາມປອດໄພສອງເທົ່າ: The trimmer features a double lock design, including a child safety lock and a security key. Ensure the security key is inserted and the safety lock is engaged before operation.
• ການຈັດການແຜ່ນ: Blades are sharp. Always handle them with care. Use the provided blade covers when storing the tool or changing blades.
• ການປ່ຽນແຜ່ນໃບ: Blades can be replaced quickly and safely without tools. Refer to the 'Blade Installation/Removal' section for detailed steps.
• ບໍາລຸງຮັກສາ: After each use, clean the blades thoroughly and keep them dry during storage to ensure a longer lifespan.
• ຄວາມປອດໄພການສາກໄຟ: Use only a 5V/1A charger (not included) with the provided USB Type-C cable. Do not attempt to charge with damaged cables or chargers.
• ການນໍາໃຊ້ທົ່ວໄປ: Keep hands, face, and feet away from the blades. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.

Figure 2: Engage the safety lock and ON/OFF switch simultaneously to operate.

3. ຕັ້ງຄ່າ

3.1 ການສາກແບັດເຕີຣີ

The WORKPRO trimmer is powered by a long-life 2000mAh lithium-ion battery. Before first use, fully charge the battery.

• Connect the provided USB Type-C cable to the charging port on the back of the trimmer.
• Plug the USB-A end of the cable into a 5V/1A USB charger (not included).
• The charger LED indicator will illuminate during charging.
• ການສາກເຕັມໃຊ້ເວລາປະມານ 2.5-3.5 ຊົ່ວໂມງ.
• For optimal battery life, recharge the trimmer every 3-6 months if it is not used often.

Figure 3: Charging port and security key location.

3.2 ການຕິດຕັ້ງ/ຖອດແຜ່ນໃບ

The 2-in-1 design allows for quick and easy switching between the grass shear and shrubbery trimmer blades.

1. Ensure the trimmer is OFF and the security key is removed before changing blades.
2. To remove a blade: Press the blade release button located on the top of the trimmer and gently pull the blade attachment away from the main unit.
3. To install a blade: Align the new blade attachment with the main unit, ensuring the gear mechanism fits correctly. Push firmly until it clicks into place.

Figure 4: Steps for quick and safe blade change.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການເປີດ/ປິດ

1. Ensure the security key is fully inserted into its slot at the back of the handle.
2. Press and hold the safety lock button (located on the side of the main unit).
3. While holding the safety lock, press the ON/OFF switch (trigger) to start the trimmer.
4. Release the ON/OFF switch to turn the trimmer off.

4.2 ການນຳໃຊ້ແຜ່ນໃບຫຍ້າ

Attach the 3.5-inch wide grass shear blade for precision trimming of grass edges and small areas your mower cannot reach.

• Ideal for trimming around flowerbeds, pathways, and fences.
• Provides approximately 60 minutes of operation on a full charge.

Figure 5: Trimming grass with the grass shear blade.

4.3 Using the Shrubbery Trimmer Blade

Attach the 5.5-inch long shrub shear blade for grooming hedges and pruning small branches.

• Suitable for branches less than 7.8mm in thickness.
• Provides approximately 45 minutes of operation on a full charge.

Figure 6: Trimming shrubs with the shrubbery trimmer blade.

4.4 Rotatable Handle Design

The handle can be adjusted 180° to provide a comfortable gripping posture when trimming the left or right side of hedges, reducing fatigue during extended use.

• To adjust the handle, locate the handle rotation button (usually near the base of the handle).
• Press the button and rotate the handle to your desired angle (0°, 90°, or 180°).
• ປ່ອຍປຸ່ມເພື່ອລັອກຕົວຈັບຢູ່ບ່ອນ.

Figure 7: The 180° rotatable handle for ergonomic use.

5. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາທີ່ເຫມາະສົມຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງເຄື່ອງຕັດຜົມຂອງທ່ານ.

• ການເຮັດຄວາມສະອາດແຜ່ນ: After each use, especially when trimming sap-producing plants, clean the blades thoroughly. Use a damp cloth to wipe off debris, then dry completely.
• ການເກັບຮັກສາ: Store the trimmer in a dry place, away from direct sunlight and extreme temperatures. Always attach the blade covers before storage to prevent accidental injury and protect the blades.
• ການດູແລຫມໍ້ໄຟ: If the trimmer is not used often, recharge the lithium-ion battery every 3-6 months to prolong its life.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

• ຍີ່ຫໍ້: WorkPRO
• ຕົວແບບ: W125106AU
• ແຫຼ່ງພະລັງງານ: ພະລັງງານຫມໍ້ໄຟ (7.2V Lithium-Ion)
• ຄວາມອາດສາມາດຫມໍ້ໄຟ: 2000mAh
• ຄວາມໄວບໍ່ມີການໂຫຼດ: 1100 rpm
• Shrub Shear Blade Length: 5.5 ນິ້ວ (14 ຊຕມ)
• Grass Shear Blade Width: 3.5 ນິ້ວ (9.7 ຊຕມ)
• Max Branch Thickness (Shrub): < 7.8 ມມ
• ນ້ໍາຫນັກລາຍການ: 1.1 lbs (0.5 ກິ​ໂລ​)
• ຂະໜາດຜະລິດຕະພັນ: 12.99"L x 3.82"W x 4.33"H
• ວັດສະດຸ: ພາດສະຕິກ, ໂລຫະ
• ການໂຕ້ຕອບການສາກໄຟ: USB Type-C
• UPC: 820909773436

8. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

For warranty information, product support, or to purchase replacement parts, please refer to the documentation included with your product or visit the official WORKPRO webເວັບໄຊ.

You can also access the full User Manual (PDF) ທີ່ນີ້.