ANBERNIC RG351MP Handheld Game Console User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the ANBERNIC RG351MP Handheld Game Console. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your gaming experience. Keep this manual for future reference.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຢ່າເຮັດໃຫ້ອຸປະກອນຢູ່ໃນອຸນຫະພູມທີ່ຮຸນແຮງ, ແສງແດດໂດຍກົງ, ຫຼືຄວາມຊຸ່ມຊື່ນສູງ.
• ຫຼີກ​ລ້ຽງ​ການ​ຫຼຸດ​ລົງ​ຫຼື​ການ​ອຸ​ປະ​ກອນ​ທີ່​ມີ​ຜົນ​ກະ​ທົບ​ທີ່​ເຂັ້ມ​ແຂງ​.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກນ້ໍາແລະຂອງແຫຼວອື່ນໆ.
• ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼື ສ້ອມແປງອຸປະກອນດ້ວຍຕົວທ່ານເອງ. ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ໄດ້ຮັບອະນຸຍາດເພື່ອຂໍຄວາມຊ່ວຍເຫຼືອ.
• ໃຊ້ແຕ່ສາຍສາກ ແລະອະແດັບເຕີທີ່ໃຫ້ມາເທົ່ານັ້ນ.
• ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມໃນລະຫວ່າງການໃຊ້ແລະການສາກໄຟ.
• This product contains a Lithium Polymer battery. Dispose of batteries responsibly according to local regulations.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• 1 x RG351MP Game Console
• 1 x WIFI Module
• 1 x 64G SD Card
• 1 x ສາຍສາກ USB
• 1 x ຄູ່ມືຜູ້ໃຊ້
• 1 x ປ້ອງກັນຫນ້າຈໍ
• 1 x Wipes

4. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the various components and controls of your ANBERNIC RG351MP console.

ຮູບ 4.1: ດ້ານຫນ້າ View. This image displays the front of the ANBERNIC RG351MP console, featuring the 3.5-inch IPS screen, D-pad, action buttons (X, Y, A, B), SELECT and START buttons, and dual analog joysticks.

Figure 4.2: Console Layout. This image provides various angles of the console, highlighting the L1/L2/R1/R2 shoulder buttons, OTG and DC ports on the top, volume controls on the side, and TF/EXT, Reset, and TF2/EXT slots on the bottom.

ຮູບ 4.3: ກັບຄືນໄປບ່ອນ View. The rear of the console is shown, displaying the ANBERNIC logo, model number RG351MP, and regulatory markings. This view also indicates the location of the internal Li-Po battery.

Figure 4.4: Screen Display. This image emphasizes the console's 3.5-inch IPS screen with OCA full lamination and 640x480 resolution, providing a clear visual experience.

5. ຕັ້ງຄ່າ

5.1 ການສາກອຸປະກອນ

Before initial use, fully charge the console. Connect the provided USB charging cable to the DC port on the top of the console and the other end to a compatible USB power adapter (maximum load 2A). A full charge typically takes approximately 4 hours.

5.2 ການໃສ່ບັດ TF

The console supports dual TF card slots. The primary TF1/EXT slot is for the operating system and pre-installed games. The TF2/EXT slot can be used to expand storage up to 256GB for additional games.

1. Locate the TF1/EXT slot on the bottom of the console.
2. Gently insert the pre-installed 64GB TF card into the slot until it clicks into place.
3. If using an additional TF card for games, insert it into the TF2/EXT slot.

Figure 5.1: TF Card Insertion. This image illustrates the process of inserting a TF card into the console's expansion slot, demonstrating how to properly seat the card.

5.3 ການເປີດ/ປິດ

• ເພື່ອເປີດເຄື່ອງ: Press and hold the Power button (located on the side) for a few seconds until the screen illuminates.
• ປິດເຄື່ອງ: Press and hold the Power button until the power-off menu appears, then select "Shutdown" or "Power Off". Alternatively, a quick press of the Power button may put the device into sleep mode, depending on system settings.

5.4 Connecting the WIFI Module

The console supports an external WIFI module for network connectivity. Insert the provided WIFI module into one of the OTG USB ports (located on the top of the console). Once connected, you can configure network settings within the system menu.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 ການນໍາທາງພື້ນຖານ

• D-pad / Analog Joysticks: Use these to navigate through menus and control in-game characters.
• ປຸ່ມ: Confirm selection or perform primary action.
• ປຸ່ມ B: Go back or perform secondary action.
• X / Y Buttons: Perform specific in-game actions as defined by the game.
• ປຸ່ມເລີ່ມຕົ້ນ: Pause game, open in-game menus, or confirm selections.
• ປຸ່ມເລືອກ: Access system menus or perform specific in-game functions.
• L1/L2/R1/R2 Buttons: Shoulder buttons for various in-game controls.

6.2 Game Selection and Launching

From the main menu, navigate to the desired game system (e.g., PS1, GBA, NES). Select a game from the list using the D-pad or analog stick and press the A button to launch it.

6.3 Saving and Loading Game States

Most emulators support "save states" which allow you to save your progress at any point in a game, independent of the game's internal save system. Refer to the specific emulator's hotkey combinations (often a combination of SELECT + L1/R1 or similar) for saving and loading states.

6.4 ການຕັ້ງຄ່າລະບົບ

Access the system settings menu (usually via the SELECT button or a dedicated menu option) to adjust:

• ພາສາ: ປ່ຽນພາສາຂອງລະບົບ.
• ຈໍສະແດງຜົນ: Adjust screen brightness, aspect ratio, and video filters.
• ສຽງ: Control volume levels and audio output.
• ເຄືອຂ່າຍ: Configure Wi-Fi settings (requires external Wi-Fi module).
• ການຕັ້ງຄ່າຕົວຄວບຄຸມ: Map buttons or calibrate joysticks.

6.5 Adding New Games

To add new games, you will need to transfer game ROMs to the TF2/EXT card. Ensure the ROMs are in a format supported by the console's emulators. Connect the TF2/EXT card to a computer using a card reader and copy the game files to the appropriate system folders on the card. After reinserting the card into the console, refresh the game list in the system menu.

7. ບໍາລຸງຮັກສາ

7.1 ການທໍາຄວາມສະອາດອຸປະກອນ

Use a soft, dry, lint-free cloth to clean the console's exterior. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or solvents.

7.2 ການດູແລຫມໍ້ໄຟ

• ຫຼີກ​ລ້ຽງ​ການ​ປະ​ຈຸ​ຫມໍ້​ໄຟ​ຢ່າງ​ເຕັມ​ທີ່​ເລື້ອຍໆ​.
• ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນນານ.
• ຖ້າອຸປະກອນຈະບໍ່ຖືກນໍາໃຊ້ເປັນເວລາດົນນານ, ສາກໄຟໃຫ້ປະມານ 50% ກ່ອນທີ່ຈະເກັບຮັກສາ.

7.3 ການປັບປຸງຊອບແວ

Periodically check the official ANBERNIC website or community forums for firmware updates. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully when performing any software updates.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

10.1 ຂໍ້ມູນການຮັບປະກັນ

ANBERNIC products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official ANBERNIC webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

10.2 ສະຫນັບສະຫນູນລູກຄ້າ

If you encounter any issues or have questions not covered in this manual, please contact ANBERNIC customer support. You can usually find contact information on the official ANBERNIC webເວັບໄຊທ໌ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ທ່ານຊື້ຜະລິດຕະພັນ.