ແນະນຳ
The Hyper Tough 500-Lumen Rechargeable LED Headlamp is designed to provide hands-free illumination for various tasks, including heavy-duty projects, close-range work, and general lighting in garages or worksites. It features multiple light modes, a rechargeable lithium-ion battery, and a durable, water-resistant construction.
Image: The Hyper Tough 500-Lumen Rechargeable LED Headlamp.
ຄຸນສົມບັດຜະລິດຕະພັນ
- 4 ໂໝດແສງ: Spot High, Spot Low, Flood High, and Flood Low for versatile lighting needs.
- ຄວາມສະຫວ່າງສູງ: Up to 500 lumens in Spot High mode.
- ຂະຫຍາຍເວລາແລ່ນ: Up to 28 hours in Flood Low mode.
- ສາຍແອວປັບໄດ້: Two-way fully adjustable for comfort and secure fit.
- ແບັດເຕີຣີທີ່ສາມາດສາກໄດ້: Integrated Lithium-ion battery with included USB charging cable.
- ການກໍ່ສ້າງທົນທານ: 1-meter impact-resistant and IPX4 water-resistant.
- Uniform Beam Pattern: Ideal for close-range work.
ເນື້ອໃນຊຸດ
- ຫົວໄຟ LED ແບບສາກໄຟໄດ້ Hyper Tough 500 ລູເມັນamp (ແບບ 20887)
- Adjustable Head Strap (pre-attached)
- ສາຍສາກ USB
Image: The Hyper Tough headlamp shown alongside its included USB charging cable.
ຕັ້ງຄ່າ
- ການປັບສາຍຫົວ: ຫົວamp comes with a two-way adjustable head strap. To adjust, locate the buckles on the sides and top of the strap. Slide the strap through the buckles to achieve a comfortable and secure fit around your head. Ensure the headlamp ໜ່ວຍແມ່ນຢູ່ໃຈກາງໜ້າຜາກຂອງເຈົ້າ.
ຮູບພາບ: A close-up view ຂອງ headl ໄດ້amp's adjustable strap mechanism.
- ຄ່າ ທຳ ນຽມ: ກ່ອນທີ່ຈະນໍາໃຊ້ຄັ້ງທໍາອິດ, ສາກໄຟຫົວໃຫ້ເຕັມamp. Connect the included USB charging cable to the headlamp's charging port and to a standard USB power source (e.g., computer, wall adapter). The charging indicator light will illuminate (typically red) during charging and change color (typically green or blue) when fully charged.
ຮູບພາບ: ຫົວamp showing the USB charging port with a cable inserted.
ຮູບພາບ: ຫົວamp displaying a green light, signifying that the battery is fully charged.
ຄໍາແນະນໍາການດໍາເນີນງານ
ຫົວamp features a single power button to cycle through its various light modes.
ຮູບພາບ: ເທິງລົງລຸ່ມ view highlighting the location of the power button on the headlamp.
- ເປີດ/ປິດ: Press the power button once to turn the headlamp on. Press and hold the power button for approximately 2 seconds to turn it off from any mode.
- Cycling Through Modes: ກັບ headl ໄດ້amp on, press the power button repeatedly to cycle through the following modes:
- Spot High Mode: Provides maximum focused brightness (500 lumens).
ຮູບພາບ: ຫົວamp emitting a strong, concentrated beam in Spot High mode.
- Spot Low Mode: Reduced focused brightness (144 lumens) for longer run time.
- Flood High Mode: Wide, uniform beam (224 lumens) for close-range work.
ຮູບພາບ: ຫົວamp producing a broad, even light distribution in Flood High mode.
- Flood Low Mode: Lowest brightness (51 lumens) for extended run time and minimal glare.
ຮູບພາບ: ຫົວamp providing a gentle, wide illumination in Flood Low mode.
- Spot High Mode: Provides maximum focused brightness (500 lumens).
ຄໍາແນະນໍາການສາກໄຟ
The Hyper Tough headlamp is equipped with a rechargeable Lithium-ion battery.
- Locate the USB charging port on the side of the headlamp.
- Insert the small end of the provided USB charging cable into the headlampທ່າເຮືອຂອງ.
ຮູບພາບ: ຫົວamp's USB charging port with the charging cable connected.
- Connect the larger end of the USB cable to a powered USB port (e.g., computer, USB wall adapter, power bank).
- The charging indicator light will show the charging status. A red light typically indicates charging, while a green or blue light indicates a full charge.
ຮູບພາບ: ຫົວamp displaying a green light, signifying that the battery is fully charged.
- ເມື່ອສາກໄຟເຕັມແລ້ວ, ໃຫ້ຖອດສາຍ USB ອອກ.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ເຊັດຫົວamp ມີອ່ອນ, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການເກັບຮັກສາ: ເກັບຮັກສາຫົວamp ໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫຼີກລ່ຽງແສງແດດໂດຍກົງ ເມື່ອບໍ່ໄດ້ໃຊ້ງານເປັນເວລາດົນ.
- ການດູແລຫມໍ້ໄຟ: To prolong battery life, avoid completely draining the battery frequently. Recharge the headlamp regularly, even if not used often.
- ຄວາມຕ້ານທານນ້ໍາ: ຫົວamp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion.
ການແກ້ໄຂບັນຫາ
- ຫົວamp ບໍ່ເປີດ: ໃຫ້ແນ່ໃຈວ່າແບັດເຕີຣີສາກແລ້ວ. ເຊື່ອມຕໍ່ກັບແຫຼ່ງພະລັງງານ USB ແລະກວດສອບຕົວຊີ້ບອກການສາກ.
- ຜົນຜະລິດແສງສະຫວ່າງ: ແບັດເຕີຣີອາດຈະອ່ອນ. ສາກໄຟຫົວຄືນamp.
- ບັນຫາການສາກໄຟ: ໃຫ້ແນ່ໃຈວ່າສາຍ USB ໄດ້ເຊື່ອມຕໍ່ຢ່າງປອດໄພກັບທັງສອງຫົວamp ແລະແຫຼ່ງພະລັງງານ. ລອງໃຊ້ສາຍ USB ຫຼືແຫຼ່ງພະລັງງານອື່ນ.
- ຄວາມບໍ່ສະບາຍຂອງສາຍ: Adjust the two-way head strap to find a more comfortable and secure fit.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | Hyper Tough |
| ໝາຍເລກຕົວແບບ | 20887 |
| ປະເພດແຫຼ່ງແສງ | LED |
| White Brightness (Max) | 500 Lumens |
| ແຫຼ່ງພະລັງງານ | ພະລັງງານຫມໍ້ໄຟ (Lithium-Ion) |
| Spot High Mode | 500 lumens, 6h run time, 75-meter beam distance |
| Spot Low Mode | 144 lumens, 12h 15min run time, 40-meter beam distance |
| Flood High Mode | 224 lumens, 6h run time, 22-meter beam distance |
| Flood Low Mode | 51 lumens, 28h run time, 11-meter beam distance |
| ລະດັບຄວາມຕ້ານທານນ້ໍາ | IPX4 (ກັນນໍ້າ) |
| ຄວາມຕ້ານທານຜົນກະທົບ | 1-ແມັດ |
| ຂະໜາດສິນຄ້າ | 1.77"D x 3.13"W x 1.78"H |
| ນ້ໍາຫນັກລາຍການ | 7.4 ອອນ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official Hyper Tough webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.