ALTHY PRE-1 Whole House Spin Down Sediment Water Filter Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your ALTHY PRE-1 Whole House Spin Down Sediment Water Filter. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The ALTHY PRE-1 filter is designed to remove sediment, rust, dust, and sand particles from your household water supply, protecting downstream appliances and improving overall water quality.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Always turn off the main water supply before installing or performing maintenance on the filter.
• Depressurize the water system before opening the filter housing.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
• Do not install the filter in direct sunlight or in areas where it may freeze. Freezing can cause damage to the filter housing and lead to leaks.
• Use only genuine ALTHY replacement parts and filters.
• ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບຂັ້ນຕອນການຕິດຕັ້ງໃດໆ, ໃຫ້ປຶກສາກັບຊ່າງທໍ່ນ້ຳທີ່ມີຄຸນວຸດທິ.

3. ອົງປະກອບຂອງຜະລິດຕະພັນ

The ALTHY PRE-1 Whole House Spin Down Sediment Water Filter package typically includes the following components:

• Filter Unit (Housing, Filter Screen)
• ທໍ່ລະບາຍນໍ້າ
• Special Wrench for Filter Housing
• 1/2" Internal 304 Stainless Steel Thread Adapters (2 pieces)
• ຄູ່ມືການສອນ

Image 3.1: ALTHY PRE-1 Filter Unit and Included Accessories. This image displays the main filter unit, two filter screens, and a black wrench.

Image 3.2: What's in the Box. This image shows the filter unit, two stainless steel thread adapters, a drain valve, and the special wrench.

4. ການຕິດຕັ້ງ

The ALTHY PRE-1 filter should be installed on the main water line entering your home, after the main shut-off valve and before any other water treatment systems or appliances.

4.1 ລາຍການກວດກ່ອນການຕິດຕັ້ງ

• Ensure you have all components listed in Section 3.
• Gather necessary tools: pipe wrench, thread sealant tape (Teflon tape), pipe cutter (if modifying existing pipes), measuring tape.
• Choose a suitable installation location:
  • ຫ່າງຈາກແສງແດດໂດຍກົງ.
  • ປ້ອງກັນຈາກອຸນຫະພູມເຢັນ.
  • ສາມາດເຂົ້າເຖິງສໍາລັບການບໍາລຸງຮັກສາ.
  • Near a drain for flushing.

4.2 ຂັ້ນຕອນການຕິດຕັ້ງ

1. Turn off Main Water Supply: Locate your main water shut-off valve and turn it off. Open a faucet in your home to relieve pressure and drain water from the pipes.
2. ກະກຽມທໍ່: Cut a section of the main water line where you intend to install the filter. Ensure the cut is clean and straight. The filter should be installed with the water flow direction matching the "IN" and "OUT" markings on the filter head.
3. Install Adapters: Apply thread sealant tape to the threads of the 1/2" internal 304 Stainless Steel Thread Adapters. Screw these adapters into the inlet and outlet ports of the filter head.
   

   Image 4.1: Flexible Installation for Water Pipe. This diagram illustrates how different pipe sizes (1/2", 3/4", 1") can be adapted for connection to the filter using the included adapters.

4. Connect the Filter: Connect the filter unit to the cut sections of your main water line. Ensure the flow direction is correct (water enters the "IN" side and exits the "OUT" side). Tighten all connections securely, but do not overtighten.
5. ຕິດຕັ້ງວາວລະບາຍນ້ຳ: Attach the drain valve to the bottom of the filter housing. Ensure it is securely tightened.
6. ກວດ​ສອບ​ການ​ຮົ່ວ​ໄຫລ​: Slowly turn on the main water supply. Carefully inspect all connections for any leaks. If leaks occur, turn off the water, depressurize the system, and re-tighten the connections.
7. ລ້າງ​ລະ​ບົບ​: Once installed and leak-free, open the drain valve at the bottom of the filter for a few minutes to flush out any air and fine particles from the new filter. Close the drain valve.

Image 4.2: Correct and Incorrect Installation/Opening. This image highlights the proper way to install the pre-filter and use the special wrench to unscrew the filter bottle, contrasting it with incorrect methods.

5. ການດໍາເນີນງານ

Once installed, the ALTHY PRE-1 filter operates continuously to filter your incoming water supply. The transparent housing allows for visual inspection of the filter screen and accumulated sediment.

5.1 Flushing the Filter

Regular flushing is essential to maintain filter efficiency and extend the life of the filter screen. The frequency of flushing depends on your water quality and usage.

1. Locate the Drain Valve: The drain valve is at the bottom of the filter housing.
2. Open the Drain Valve: Slowly turn the handle of the drain valve to the "ON" or open position. You will see water and accumulated sediment flush out.
3. Flush Duration: Allow water to flush for 30-60 seconds, or until the water runs clear.
4. Close the Drain Valve: Turn the handle back to the "OFF" or closed position.

It is recommended to flush the filter at least once a month, or more frequently if you notice a decrease in water pressure or visible sediment accumulation in the housing.

6. ບໍາລຸງຮັກສາ

Beyond regular flushing, periodic cleaning of the filter screen is necessary to ensure optimal performance.

6.1 Cleaning the Filter Screen

The ALTHY PRE-1 features a reusable and flushable stainless steel filter screen with a built-in double-sided scraper for efficient cleaning.

1. ປິດການສະຫນອງນ້ໍາ: Turn off the main water supply and open a nearby faucet to relieve pressure.
2. ລະບາຍນ້ໍາ: Open the drain valve at the bottom of the filter to drain water from the housing. Close the drain valve once drained.
3. Remove Filter Housing: Use the provided special wrench to carefully unscrew the transparent filter housing from the filter head. Turn counter-clockwise.
   

   Image 6.1: Using the Special Wrench. The image demonstrates the correct use of the special wrench to unscrew the filter housing for maintenance.
4. Remove Filter Screen: Carefully pull out the stainless steel filter screen from the housing.
5. ທໍາຄວາມສະອາດຫນ້າຈໍ: Rinse the filter screen thoroughly under running water. The built-in double-sided scraper helps dislodge trapped particles. You can also use a soft brush if necessary.
   

   Image 6.2: Double-sided Scraper. This diagram shows the internal double-sided scraper mechanism designed for 360-degree cleaning of the filter screen from the inside out.

6. ກວດກາວົງແຫວນ O: Check the O-rings on the filter housing and head for any signs of wear, cracks, or damage. Replace if necessary. Lubricate O-rings with food-grade silicone grease to ensure a good seal.
7. ປະກອບຄືນໃໝ່: Insert the clean filter screen back into the housing. Carefully screw the filter housing back onto the filter head, ensuring it is hand-tightened first, then use the special wrench for a final snug fit. Do not overtighten.
8. ຟື້ນຟູການສະຫນອງນ້ໍາ: ຄ່ອຍໆເປີດແຫຼ່ງນ້ຳຫຼັກ ແລະ ກວດສອບການຮົ່ວໄຫຼ.

It is recommended to clean the filter screen every 3-6 months, depending on your water quality.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

Image 8.1: Filter Performance Overview. This image highlights the filter's ability to remove up to 99% of impurities and its flow rate of up to 20 GPM.

Image 8.2: Featured Material and Testing. This image emphasizes the filter's BPA-free, food-grade construction and its successful completion of 150,000 cycle water hammer tests and a 1000psi hydrostatic test.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ALTHY products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts, please contact ALTHY customer service through the retailer where you purchased the product or visit the official ALTHY webເວັບໄຊ.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.