Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ສະເຫມີຕັດການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານຈາກເຕົ້າສຽບໃສ່ຝາກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືເອົາອົງປະກອບໃດໆ.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• ເກັບຮັກສາຊິ້ນສ່ວນຂະໜາດນ້ອຍ ແລະ ສະກູໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. ເນື້ອໃນຊຸດ

ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດມີຢູ່ໃນຊຸດຂອງທ່ານ:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Accessory Box (containing screws, standoffs, cable ties, etc.)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

4. ຜະລິດຕະພັນເກີນview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ຮອງຮັບເມນບອດ: Compatible with ATX, Micro-ATX, and ITX motherboards.
• ຄວາມເຢັນ: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• ການກັ່ນຕອງຝຸ່ນ: Equipped with a magnetic anti-dust mesh on the top panel.
• ການເກັບຮັກສາ: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• ແຜງດ້ານຂ້າງ: Tempered glass side panels for an aesthetic view ຂອງ​ອົງ​ປະ​ກອບ​ພາຍ​ໃນ​.

ຮູບທີ 4.1: ດ້ານໜ້າ view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

ຮູບ 4.2: ເທິງລົງລຸ່ມ view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

5.1 ການຖອດແຜງດ້ານຂ້າງ

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 ການຕິດຕັ້ງເມນບອດ

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. ຍຶດແຜງວົງຈອນຫຼັກໃຫ້ແໜ້ນໂດຍໃຊ້ສະກູທີ່ເໝາະສົມຈາກກ່ອງອຸປະກອນເສີມ.

5.3 ການຕິດຕັ້ງຫນ່ວຍບໍລິການພະລັງງານ (PSU).

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 ການຕິດຕັ້ງ Drive Storage

• ຮາດດິດ 3.5": Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• 2.5" SSDs: SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 ບັດກາຟິກ ແລະ ບັດຂະຫຍາຍ

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 ການຈັດການສາຍ

ນຳໃຊ້ແຜ່ນຕັດເສັ້ນທາງສາຍເຄເບິນ ແລະຈຸດຜູກລົງທາງຫຼັງຖາດເມນບອດເພື່ອຈັດການສາຍ. ນີ້ປັບປຸງການໄຫຼຂອງອາກາດແລະຄວາມງາມ.

5.7 ການເຊື່ອມຕໍ່ສາຍ I/O ດ້ານໜ້າ ແລະ ສາຍພັດລົມ

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

ຮູບທີ 6.1: ໄລຍະໃກ້ view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. ບໍາລຸງຮັກສາ

• ການເຮັດຄວາມສະອາດກອງຂີ້ຝຸ່ນ: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• ທໍາຄວາມສະອາດທົ່ວໄປ: ໃຊ້ອ່ອນ, ງamp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• ການກຳຈັດຝຸ່ນພາຍໃນ: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. ການແກ້ໄຂບັນຫາ

8.1 ຄອມພິວເຕີບໍ່ເປີດ

• ໃຫ້ແນ່ໃຈວ່າສາຍໄຟໄດ້ເຊື່ອມຕໍ່ກັບທັງ PSU ແລະປລັກສຽບຝາຢ່າງແໜ້ນໜາແລ້ວ.
• ກວດສອບວ່າສະວິດ PSU ຢູ່ໃນຕຳແໜ່ງ 'ເປີດ'.
• ກວດສອບວ່າສາຍສະວິດໄຟຂອງແຜງດ້ານໜ້າໄດ້ເຊື່ອມຕໍ່ກັບຫົວສຽບຂອງເມນບອດຢ່າງຖືກຕ້ອງ.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Fans Not Spinning / RGB Not Lighting Up

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 ບັນຫາຄວາມຮ້ອນເກີນໄປ

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• ທຳຄວາມສະອາດຕົວກອງຝຸ່ນ ແລະ ອົງປະກອບພາຍໃນເປັນປະຈຳ.
• Verify that CPU cooler and GPU fans are functioning properly.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.