1. ບົດແນະນຳ
This manual provides essential information for the proper installation, operation, and maintenance of your Dilwe Dual Motor RC Winch. Designed for 1/10 scale remote control cars, this high-torque winch is suitable for various off-road RC trucks, including models like Redcat, TRAXXAS TRX4, and Axial SCX10 90046 D90. Its durable alloy construction ensures reliable performance for trail recovery adventures.
The winch features a dual-motor drive and a super soft cable, offering stable performance and strong pulling power for dragging objects or other RC vehicles.
2. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ປະເພດລາຍການ | RC Dual Motor Winch |
| ວັດສະດຸ | ໂລຫະປະສົມ |
| ສີ | ດຳ |
| Winch Load Limit (Hard Pull) | 7-8 kg (approximately 15.4 - 17.6 lbs) |
| ການສະ ໜອງ ພະລັງງານ Voltage | 6-12.6V (2-3 LIPO) |
| Steel Wire Rope Length | Approx. 120 cm / 47.2 in |
| Installation Fixation Center Hole Position | 8 x 45 ~ 53 mm / 0.3 in x 1.8 ~ 2.1 in |
| Screw ຄົງ | M2 x 8 |
| Winch Size | Approx. 76 x 26 mm / 3 x 1 in |
| ຂະໜາດສິນຄ້າ | 0.39 x 0.39 x 0.39 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 3.52 ອອນ |
Image: Winch Dimensions
The image above illustrates the compact dimensions of the Dilwe Dual Motor RC Winch, showing its length of 76mm (3 inches) and width of 26mm (1 inch).
3. ຄໍາແນະນໍາການຕິດຕັ້ງ
3.1 ເນື້ອໃນຊຸດ
- 1 x RC Dual Motor Winch
- 4 x Screw (M2 x 8)
- ໝາກ ໄມ້ 4 x
Image: Winch with Included Hardware
The image displays the Dilwe RC Winch along with the four M2x8 screws and four nuts provided for installation.
3.2 ຂັ້ນຕອນການຕິດຕັ້ງ
- Insert the winch plug into the controller plug.
- Connect the controller to the receiver.
- Before connecting the power supply, check the direction of the wire and the plug (red +, black -).
- Plug the battery/receiver into the power cable.
- Insert the winch plug line into the controller and check the functionality of the winch.
- Connect the power cord to the receiver, then press and hold the reset button.
Video: RC Winch Setup and Demonstration
This video demonstrates the physical setup and initial testing of the RC winch, including connecting it to a power source and receiver.
4. Operating the Winch
Once properly installed and powered, the winch can be operated using a compatible remote control system. Ensure your remote is paired with the receiver and the winch controller is correctly connected to the receiver's designated channel.
The winch cable can be extended and retracted to assist in vehicle recovery or to pull objects. Always ensure the cable is free from obstructions and that the load does not exceed the winch's rated capacity.
Image: Winch Mounted on RC Car
The image shows the Dilwe RC Winch mounted on a 1/10 scale RC truck, illustrating a typical installation for operational use.
5. ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Dilwe RC Winch, regular maintenance is recommended:
- ຮັກສາຄວາມສະອາດ: Regularly clean the winch and cable to prevent dirt and debris buildup, which can affect operation.
- ກວດສອບສາຍ: Periodically check the steel wire rope for any signs of fraying, kinks, or damage. Replace if necessary.
- ກວດສອບການເຊື່ອມຕໍ່: ຮັບປະກັນວ່າສາຍເຊື່ອມຕໍ່ໄຟຟ້າທັງໝົດຍັງຄົງປອດໄພ ແລະ ບໍ່ມີການກັດກ່ອນ.
- ການລະບາຍສີ: Apply a small amount of appropriate lubricant to moving parts as needed, avoiding electrical components.
6. ການແກ້ໄຂບັນຫາ ແລະ ຂໍ້ສັງເກດທີ່ສຳຄັນ
- Powering the Winch: Do not power the winch directly without a proper controller, otherwise it may damage the motor by causing one-way rotation or blocking.
- Performance Expectations: While rated for 7-8kg (15.4-17.6 lbs) hard pull, actual performance may vary depending on power supply and application. Some users have reported that the winch may struggle to lift vehicles weighing around 11 lbs, even when powered by a 3S battery with a 120C rating and an external BEC set to 7.4V. In such cases, increasing the BEC voltage to 8V might allow it to lift, but it may operate under strain.
- ການຄຸ້ມຄອງສາຍໄຟ: Ensure the cable spools evenly to prevent tangles or damage during operation.
Video: Winch Performance Test and BEC Discussion
This video provides a detailed demonstration of the winch's setup with an external BEC and tests its pulling capabilities, highlighting observations regarding its performance under load and different voltage ການຕັ້ງຄ່າ.
7. ຂໍ້ມູນຄວາມປອດໄພ
- Always ensure proper polarity when connecting the power supply (red + / black -).
- Do not exceed the recommended power supply voltage ຂອງ 6-12.6V.
- Keep fingers and loose clothing away from the winch cable and drum during operation.
- Do not attempt to pull loads that significantly exceed the winch's stated load limit.
- Always operate the winch in a safe and controlled environment.