Candy BCTD H7A1TE-S Built-in Heat Pump Dryer User Manual

1. ບົດແນະນຳ

This manual provides essential information for the safe and efficient use of your Candy BCTD H7A1TE-S built-in heat pump dryer. Please read these instructions carefully before installation and operation, and keep them for future reference. This appliance is designed to dry up to 7 kg of laundry and features advanced connectivity options.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງໄດ້ຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງແລະຖືກຕໍ່ເນື່ອງໂດຍນັກວິຊາການທີ່ມີຄຸນວຸດທິ.
• ຢ່າປ່ອຍໃຫ້ເດັກນ້ອຍຫຼິ້ນ ຫຼື ໃຊ້ເຄື່ອງອົບຜ້າ.
• ຢ່າຕາກສິ່ງຂອງທີ່ເປື້ອນດ້ວຍສານໄວໄຟ (ເຊັ່ນ: ນ້ຳມັນປຸງແຕ່ງອາຫານ, ນ້ຳມັນແອັດຊັງ).
• Clean the lint filter after every cycle to prevent fire hazards and maintain drying efficiency.
• Ensure adequate ventilation in the room where the dryer is installed.
• Do not block the air intake or exhaust vents of the dryer.
• ຖອດປລັກເຄື່ອງໃຊ້ກ່ອນທີ່ຈະທໍາຄວາມສະອາດຫຼືບໍາລຸງຮັກສາໃດໆ.
• ຢ່າພະຍາຍາມສ້ອມແປງເຄື່ອງໃຊ້ໄຟຟ້າດ້ວຍຕົວທ່ານເອງ. ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ໄດ້ຮັບອະນຸຍາດເພື່ອການສ້ອມແປງ.

3. ຜະລິດຕະພັນເກີນview

The Candy BCTD H7A1TE-S is a built-in heat pump dryer designed for efficiency and user convenience. Key features include a 7 kg capacity, 15+1 drying programs, a digital programmer, and Wi-Fi/Bluetooth connectivity for remote control via the Simply-Fi app.

ອົງປະກອບຫຼັກ ແລະ ຄຸນສົມບັດຕ່າງໆ:

• Higher Door Opening: Designed for ergonomic loading and unloading, reducing strain.
• EasyCase Water Container: An ergonomically designed compartment located in the door for easy removal and emptying of condensed water. This water can be reused for ironing or watering plants.
• Super Easy Iron Function: Utilizes a smart sensor to maintain optimal humidity and an alternating drum movement to reduce creases, significantly cutting down ironing time.
• ລະບົບປ້ຳຄວາມຮ້ອນ: Ensures low energy consumption by operating in a closed circuit at lower temperatures, preventing heat dispersion.
• Connectivity (Wi-Fi & BLE): Allows remote control, program selection, and diagnostics via the Candy Simply-Fi app on your smartphone.
• Check-up Program: Available through the Simply-Fi app, this program monitors the condition of filters, door lock, drying system, motor, cooling ventilation, and water collection system, providing alerts and solutions for detected errors.

ຮູບ 1: ດ້ານຫນ້າ view of the Candy BCTD H7A1TE-S built-in heat pump dryer, showing the control panel, door, and lower ventilation grille.

Figure 2: The Candy BCTD H7A1TE-S dryer seamlessly integrated into a kitchen cabinet, demonstrating its built-in design.

Figure 3: The dryer door opened, revealing the EasyCase water collection container integrated into the door, designed for easy removal.

ຮູບທີ 4: ໄລຍະໃກ້ view of the control panel, highlighting the program selector dial with various drying options and the 'hOn' connectivity button.

ຮູບທີ 5: ລາຍລະອຽດ view of the digital display, showing indicators for drying progress, time remaining, and connectivity status.

Figure 6: Interior of the dryer drum, illustrating the design for efficient and gentle drying of laundry.

4. ຕັ້ງຄ່າ

4.1 ການຫຸ້ມຫໍ່

Carefully remove the dryer from its packaging. Check for any transit damage. The package includes the dryer, a 5-liter water drawer (EasyCase), an electrical connection cable, and a drain hose.

4.2 ການຕິດຕັ້ງ

This dryer is designed for built-in installation. Ensure the installation space meets the required dimensions for proper ventilation and operation. Refer to the diagram below for precise measurements.

Figure 7: Installation diagram showing the dimensions for integrating the dryer into a cabinet. Dimensions are in millimeters.

• ວາງເຄື່ອງເປົ່າໃສ່ພື້ນຜິວທີ່ມີລະດັບຄວາມຫມັ້ນຄົງ.
• Connect the electrical cable to a suitable power outlet.
• Decide whether to use the EasyCase water container or connect the drain hose for direct drainage. If using the drain hose, ensure it is properly secured to a suitable drain.

4.3 ການນໍາໃຊ້ເບື້ອງຕົ້ນ

Before the first drying cycle, ensure all packaging materials are removed from the drum. It is recommended to run a short cycle with a damp cloth to clean the drum interior.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ກຳລັງໂຫຼດເຄື່ອງຊັກລີດ

• Ensure laundry is properly spun to remove excess water.
• ຢ່າໃຫ້ເຄື່ອງອົບແຫ້ງຫຼາຍເກີນໄປ. ຄວາມອາດສາມາດສູງສຸດແມ່ນ 7 kg.
• Separate laundry by fabric type and desired dryness level.

5.2 ການຄັດເລືອກໂຄງການ

Turn the program selector dial to choose one of the 15+1 available drying programs. The digital display will show the estimated drying time and program settings. Refer to the appliance's control panel (Figure 4) for program options.

5.3 ໜ້າທີ່ພິເສດ

• ເລີ່ມຊັກຊ້າ: Press the 'Delayed Start' button to postpone the start of the drying cycle by up to 24 hours. This allows you to take advantage of off-peak electricity tariffs.
• ໂຄງ​ການ​ຂົນ​ສັດ​: Select the dedicated wool program for delicate woolens. This program controls temperature and uses a special drum movement to prevent damage and knot formation.
• Super Easy Iron: Activate this function to reduce creases and wrinkles in your laundry, making ironing easier and faster.

5.4 Smart Connectivity (Wi-Fi & Bluetooth)

Download the Candy Simply-Fi app on your smartphone to connect to your dryer via Wi-Fi or Bluetooth. The app allows you to:

• Remotely start, pause, or stop drying cycles.
• Access additional programs and features.
• Monitor the drying progress.
• Receive notifications and diagnostic alerts.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດແລະຍືດອາຍຸຊີວິດຂອງເຄື່ອງອົບແຫ້ງຂອງທ່ານ.

6.1 ການທໍາຄວາມສະອາດການກັ່ນຕອງ Lint

The lint filter must be cleaned after every drying cycle. Pull out the filter, remove accumulated lint, and rinse under running water if necessary. Ensure it is completely dry before reinserting.

6.2 Emptying the EasyCase Water Container

If not using direct drainage, the EasyCase water container (Figure 3) must be emptied after each cycle. Pull out the container from the door, empty the water, and reinsert it securely.

6.3 ການທໍາຄວາມສະອາດທົ່ວໄປ

ເຊັດດ້ານນອກຂອງເຄື່ອງອົບແຫ້ງດ້ວຍຜ້າອ່ອນ, ງamp cloth. Do not use abrasive cleaners or solvents. Periodically clean the condenser unit according to the instructions in the full user manual (available via the Simply-Fi app or Candy support webເວັບໄຊ).

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your dryer, consult the following common troubleshooting steps. For more detailed diagnostics, use the Check-up program via the Simply-Fi app.

• ເຄື່ອງອົບແຫ້ງບໍ່ເລີ່ມ: Ensure the power cable is securely plugged in, the door is fully closed, and a program is selected.
• ເສື້ອຜ້າບໍ່ແຫ້ງດີ: Check if the lint filter is clean and the water container is empty. Ensure the dryer is not overloaded and the correct program for the fabric type is selected.
• ສຽງທີ່ຜິດປົກກະຕິ: ກວດສອບວັດຖຸແປກປອມຢູ່ໃນຖັງ. ຮັບປະກັນວ່າເຄື່ອງອົບແຫ້ງຢູ່ໃນລະດັບດຽວກັນ.
• ລະ​ຫັດ​ຄວາມ​ຜິດ​ພາດ​ສະ​ແດງ​ໃຫ້​ເຫັນ​: Refer to the Simply-Fi app's Check-up program for specific error code interpretations and recommended solutions.

If an error is detected by the Check-up program, the Simply-Fi app will alert you and provide guidance to resolve the issue. For persistent problems, contact customer support.

8. ຂໍ້ມູນຈໍາເພາະ

Figure 8: EU Energy Label for the Candy BCTD H7A1TE-S dryer, indicating an 'F' energy efficiency class, 145 kWh/100 cycles, 67 dB noise level, and 7.0 kg capacity. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2155440.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

9.1 ການຮັບປະກັນຈາກຜູ້ຜະລິດ

The Candy BCTD H7A1TE-S dryer comes with a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 2 ປີ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

9.2 ສະຫນັບສະຫນູນລູກຄ້າ

For technical assistance, troubleshooting, or to schedule a service appointment, please contact Candy customer support. You can also utilize the diagnostic features within the Candy Simply-Fi app for immediate assistance.

Additional resources and detailed manuals may be found on the official Candy service webສະຖານທີ່:

• https://manuals.he.services
• https://go.he.services/