DENON DP-2500

DENON DP-2500 Analog Record Player Instruction Manual

ຮູບແບບ: DP-2500

1. ບົດແນະນຳ

This manual provides essential information for the proper setup, operation, and maintenance of your DENON DP-2500 Analog Record Player. Please read these instructions thoroughly before using the unit to ensure optimal performance and longevity. The DP-2500 features a high-precision quartz lock direct drive system and a dynamic damping tonearm for superior audio reproduction.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

  • ການສະຫນອງພະລັງງານ: Ensure the unit is connected to an AC 100V, 50/60Hz power source. Using an incorrect power supply can damage the unit and pose a safety risk.
  • ການຈັດວາງ: Place the record player on a stable, level surface away from direct sunlight, heat sources, moisture, and excessive vibrations.
  • ການລະບາຍອາກາດ: ຫ້າມປິດຊ່ອງລະບາຍອາກາດ. ອະນຸຍາດໃຫ້ມີພື້ນທີ່ພຽງພໍປະມານຫນ່ວຍບໍລິການສໍາລັບການໄຫຼວຽນຂອງອາກາດທີ່ເຫມາະສົມ.
  • ຂອງແຫຼວ ແລະ ວັດຖຸຕ່າງປະເທດ: Do not expose the unit to liquids. Avoid inserting foreign objects into any openings. If liquid or an object enters the unit, immediately disconnect the power and contact qualified service personnel.
  • ທໍາຄວາມສະອາດ: Always disconnect the power cord before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • ການບໍລິການ: ຢ່າພະຍາຍາມໃຫ້ບໍລິການຫນ່ວຍງານດ້ວຍຕົວເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.

3. ຕັ້ງຄ່າ

3.1 ການຫຸ້ມຫໍ່ແລະການຈັດວາງ

Carefully remove the record player and all accessories from the packaging. Place the unit on a sturdy, level surface to prevent vibrations from affecting playback quality. Ensure there is enough space around the unit for the dust cover to open fully.

3.2 ການຕິດຕັ້ງແຜ່ນ

  1. Gently place the turntable platter onto the spindle.
  2. Place the felt mat or rubber mat on top of the platter.

3.3 ການຕິດຕັ້ງຝາປິດຝຸ່ນ

Attach the dust cover hinges to the designated slots on the rear of the record player cabinet. Carefully lower the dust cover onto the hinges.

3.4 Tonearm Balance and Tracking Force Adjustment

  1. Ensure the cartridge is securely mounted to the headshell.
  2. Lower the tonearm lifter. Release the tonearm clamp.
  3. Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced (floating horizontally).
  4. Once balanced, hold the counterweight steady and rotate only the tracking force ring until '0' aligns with the center line on the tonearm.
  5. Rotate the entire counterweight (including the ring) to set the recommended tracking force for your cartridge (e.g., 1.5g to 2.0g). Refer to your cartridge's specifications.

3.5 ການປັບຕ້ານການສະເກັດ

Set the anti-skating dial to match the tracking force you have set. This compensates for the inward force on the stylus as the record plays.

3.6 ການເຊື່ອມຕໍ່ສຽງ

  1. Connect the RCA audio cables from the record player's output to the 'PHONO' input on your amplifier ຫຼືຜູ້ຮັບ.
  2. Connect the ground wire from the record player to the 'GND' terminal on your amplifier or receiver. This helps reduce hum.

3.7 ການເຊື່ອມຕໍ່ພະລັງງານ

Plug the power cord into an appropriate AC 100V wall outlet.

DENON DP-2500 Analog Record Player with dust cover, front and rear views

This image shows the DENON DP-2500 Analog Record Player from two angles. The top view displays the turntable with its clear dust cover closed, highlighting the platter and tonearm assembly. The bottom view shows the rear of the unit, revealing the power cord and connection ports, also with the dust cover closed.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການເປີດ/ປິດ

Locate the power switch, typically on the front or side of the unit. Flip the switch to the 'ON' position to power on the record player. Flip it to 'OFF' when not in use.

4.2 ການ​ຄັດ​ເລືອກ​ຄວາມ​ໄວ​

The DP-2500 supports two playback speeds: 33 1/3 RPM and 45 RPM. Use the speed selector switch (usually labeled '33' and '45') to choose the appropriate speed for your record.

4.3 ການຫຼິ້ນບັນທຶກ

  1. ວາງບັນທຶກໃສ່ຖາດ, ຮັບປະກັນວ່າມັນຢູ່ກາງ.
  2. Select the correct playback speed (33 1/3 or 45 RPM).
  3. Gently lift the tonearm using the tonearm lifter lever.
  4. ຄ່ອຍໆວາງແຂນໂທນເນີໄວ້ເທິງຮ່ອງເລີ່ມຕົ້ນທີ່ຕ້ອງການຂອງແຜ່ນສຽງ.
  5. Slowly lower the tonearm lifter lever to gently place the stylus onto the record. Playback will begin.

4.4 ການຢຸດການຫຼິ້ນຄືນ

  1. At the end of a record side, or when you wish to stop playback, raise the tonearm using the tonearm lifter lever.
  2. Gently return the tonearm to its rest and secure it with the tonearm clamp.
  3. ເອົາບັນທຶກອອກຈາກແຜ່ນ.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດຫນ່ວຍງານ

Regularly dust the record player with a soft, dry, lint-free cloth. For stubborn marks on the cabinet or dust cover, slightly dampen the cloth with water and wipe gently, then dry immediately. Avoid using chemical cleaners.

5.2 Stylus Cleaning

A dirty stylus can degrade sound quality and damage your records. Use a dedicated stylus cleaning brush or fluid (following the cleaner's instructions) to gently clean the stylus. Always brush from back to front.

5.3 ການດູແລຮັກສາຝາປິດຝຸ່ນ

The dust cover protects your record player. Clean it regularly to maintain clarity. Avoid placing heavy objects on it to prevent scratches or damage.

6. ການແກ້ໄຂບັນຫາ

  • ບໍ່ມີພະລັງງານ: Check if the power cord is securely plugged into both the unit and the wall outlet. Ensure the power switch is in the 'ON' position.
  • ບໍ່ມີສຽງ ຫຼືສຽງຕໍ່າ: Verify that the RCA cables are correctly connected to the 'PHONO' input on your ampຕົວຊ່ວຍ. ຮັບປະກັນຂອງທ່ານ amplifier is set to the 'PHONO' input and the volume is turned up. Check if the stylus is properly seated in the cartridge.
  • Humming Sound: Ensure the ground wire is securely connected between the record player and your amplifier. Check for proper shielding of audio cables.
  • ສຽງບິດເບືອນ: Check the stylus for dirt or damage. Verify that the tracking force and anti-skating settings are correct for your cartridge. Ensure the record is clean.
  • ຄວາມໄວບໍ່ຖືກຕ້ອງ: Confirm that the speed selector switch is set to the correct RPM (33 1/3 or 45) for the record being played.

7. ຂໍ້ມູນຈໍາເພາະ

7.1 Phono Motor Unit (DP-2000)

  • ວິທີການຂັບ: Direct Drive
  • ມໍເຕີ: AC Servo Motor
  • ການຄວບຄຸມຄວາມໄວ: High-precision magnetic recording playback method with crystal oscillator-based frequency detection speed servo and phase servo
  • ຄວາມໄວການຫມຸນ: 33 1/3 rpm, 45 rpm
  • ເວລາເລີ່ມຕົ້ນ: Within 1.5 seconds (at 33 1/3 rpm)
  • ວ້າວ ແລະ ກະພິບ: Less than 0.015% w.r.m.s (new measurement method)
  • ອັດຕາສ່ວນ S/N: 75dB or more (DIN-B)
  • ແຜ່ນພັບ: 300mm Aluminum Die-cast, 1.2kg (Inertia mass 160kg-cm2)
  • Rotation Speed Deviation: ພາຍໃນ 0.002%
  • Load Characteristics: 0% (100g needle pressure at outermost circumference)
  • ເບກ: DC Brake method (within 3 seconds)
  • ການສະຫນອງພະລັງງານ: AC 100V, 50/60Hz
  • ການ​ບໍ​ລິ​ໂພກ​ພະ​ລັງ​ງານ​: 12W
  • ນ້ຳໜັກ: 7 ກິ​ໂລກ​ຣາມ

7.2 Tonearm Unit

  • ປະເພດ: Static Balance type Dynamic Dampກົນ​ໄກ
  • ຄວາມຍາວປະສິດທິພາບ: 244ມມ
  • ຄ້າງ: 14ມມ
  • ມຸມຊົດເຊີຍ: 20.5°
  • ການຕິດຕາມຄວາມຜິດພາດ: 2.5° (maximum)
  • Compatible Cartridge Weight: 5g ຫາ 11g
  • Stylus Pressure Variable Range: 0g to 2.5g / revolution (0.1g per mark)
  • Head Shell Weight: 8.5g (excluding mounting screws and nuts)
  • Arm Height Adjustment Range: 41.5mm to 47mm (from arm board surface to pipe center)
  • Head Shell Connector: EIA standard 4p connector
  • ສາຍ​ອອກ​: Low capacitance cord with 5p connector, approx. 1.2m
  • Arm Lifter: ນ້ຳມັນ Damped type

7.3 ທົ່ວໄປ

  • ຕູ້: Plywood with Vinyl Sheet
  • ຂະໜາດ (ກວ້າງ x ສູງ x ຍາວ): 485mm x 175mm x 405mm (when dust cover is closed)
  • ນ້ຳໜັກທັງໝົດ: 11.7 ກິ​ໂລກ​ຣາມ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized DENON dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.