1. ບົດແນະນຳ
This manual provides essential instructions for the assembly, operation, and maintenance of your Steelcase Series 1 Office Chair. The Steelcase Series 1 is designed to offer ergonomic support and comfort, featuring weight-activated controls, back supports, and arm supports to enhance productivity in various work environments.
Figure 1.1: Steelcase Series 1 Office Chair in Graphite.
2. ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Always follow assembly instructions carefully to ensure safe use. Do not exceed the maximum weight limit of 400 pounds. Keep fingers and other body parts away from moving parts during assembly and use. Always use the chair on appropriate surfaces to maintain stability.
3. ຄໍາແນະນໍາຂອງສະພາແຫ່ງ
The Steelcase Series 1 Office Chair is designed for easy assembly without the need for special tools. Follow these steps for quick setup:
- Attach the Gas Lift to the Base: Insert the gas lift cylinder into the center hole of the chair base. Ensure it is firmly seated.
- Attach the Seat Mechanism: Place the seat mechanism onto the top of the gas lift.
- ເຊື່ອມຕໍ່ພວງມາໄລດ້ານຫຼັງ: Align the backrest with the seat and secure it according to the chair's design.
- ຕິດຕັ້ງບ່ອນວາງແຂນ: Attach the armrests to the designated slots on the chair.
Figure 3.1: Gas lift inserted into the chair base.
Figure 3.2: Seat mechanism installation.
Figure 3.3: Backrest attachment.
Figure 3.4: Armrest installation.
ສຳລັບຄູ່ມືການປະກອບຮູບພາບ, ກະລຸນາເບິ່ງວິດີໂອການປະກອບຢ່າງເປັນທາງການຂ້າງລຸ່ມນີ້:
Video 3.1: Official Steelcase Series 1 Chair Assembly Guide. This video demonstrates the step-by-step process for assembling your chair quickly and efficiently.
4. ການດໍາເນີນງານແລະການປັບຕົວ
The Steelcase Series 1 chair offers various adjustments to customize your seating experience for optimal comfort and ergonomic support.
4.1. ການປັບຄວາມສູງບ່ອນນັ່ງ
To adjust the seat height, locate the lever under the right side of the seat. Lift the lever to raise the seat, or remain seated and lift the lever to lower the seat. Adjust until your feet are flat on the floor and your thighs are parallel to the floor.
Figure 4.1: Seat height adjustment control.
4.2. ການປັບຄວາມເລິກຂອງບ່ອນນັ່ງ
The seat depth can be adjusted to accommodate different leg lengths and reduce pressure behind the knees. Locate the handle under the front left side of the seat. Pull the handle up and slide the seat forward or backward until there are 2-3 inches of space between the seat edge and the back of your knees.
4.3. ການປັບທີ່ວາງແຂນ
The armrests are 4-dimensional, allowing for height, width, pivot, and depth adjustments. Press the button on the side of the armrest to adjust its height. To adjust width, pivot, or depth, grasp the arm cap and slide it to your desired position.
Figure 4.2: Multi-directional armrest adjustments.
4.4. ການປັບຕົວສະຫນັບສະຫນູນ lumbar
The adjustable lumbar support provides additional comfort to your lower back. Grasp the handles on either side of the lumbar support on the backrest. Lean forward slightly and slide the lumbar support up or down to fit the small of your back.
Figure 4.3: Lumbar support positioning.
4.5. Recline Tension and Lock
The chair features weight-activated controls for recline tension. Use the comfort dial located under the seat to adjust the recline tension. Turn the dial to increase or decrease resistance. The chair also offers three reclining positions, including an upright back lock.
Figure 4.4: Recline tension adjustment dial.
For a visual guide on chair adjustments, please refer to the official adjustment video below:
Video 4.1: Official Steelcase Series 1 Chair Adjustment Guide. This video demonstrates how to properly adjust the various features of your chair for personalized comfort.
5. ບໍາລຸງຮັກສາ
To ensure the longevity and appearance of your Steelcase Series 1 Office Chair, follow these simple maintenance guidelines:
- ທໍາຄວາມສະອາດ: Spot wash the fabric components as needed. Use a mild soap and water solution with a soft cloth. Avoid harsh chemicals that may damage the material.
- ການດູແລທົ່ວໄປ: Regularly inspect all moving parts and fasteners to ensure they are secure. Tighten any loose components as necessary.
- ນັກສະແດງ: Keep the casters clean from debris (hair, dust, etc.) to ensure smooth movement.
6. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | ຕູ້ເຫຼັກ |
| ຊື່ຕົວແບບ | ຊຸດທີ 1 |
| ສີ | ກຣາຟ |
| ຂະໜາດສິນຄ້າ | 23.7"D x 27"W x 41.25"H |
| ວັດສະດຸ | Polyester & Polyester Blend (Foam Fill) |
| ຄໍາແນະນໍານ້ໍາຫນັກສູງສຸດ | 400 ປອນ |
| ຄຸນນະສົມບັດພິເສດ | Adjustable Height, Adjustable Lumbar, Arm Rest, Ergonomic, Rolling |
| ແບບກັບຄືນໄປບ່ອນ | ດ້ານຫຼັງແຂງ (ຕາໜ່າງ) |
| ແບບແຂນ | ມີແຂນ |
| ຈຳນວນຕຳແໜ່ງທີ່ນອນ | 3 |
| ຄໍາແນະນໍາດ້ານຫນ້າ | ຊັ້ນແຂງ |
| ນ້ໍາຫນັກລາຍການ | 29 ປອນ |
| UPC | 724274002309 |
| ໝາຍເລກຕົວແບບ | 435A00-5T29-5S25-6053-4ARM-LUM-HF |
Figure 6.1: Key dimensions of the Steelcase Series 1 Office Chair.
7. ການແກ້ໄຂບັນຫາ
If you encounter any issues with your Steelcase Series 1 Office Chair, please refer to the following common solutions:
- ເກົ້າອີ້ບໍ່ປັບຄວາມສູງ: Ensure the gas lift lever is fully engaged and that there is no weight on the seat when raising, or apply weight when lowering.
- Casters ບໍ່ມ້ວນກ້ຽງ: Check for debris (hair, lint) wrapped around the caster wheels and remove it.
- ສຽງດັງ: Inspect all connections and tighten any loose screws. Applying a small amount of silicone lubricant to moving metal parts may help.
- Backrest feels loose: Verify that the backrest attachment points are securely fastened.
ຖ້າບັນຫາຍັງຄົງຢູ່, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Steelcase products are designed for durability and performance. For specific warranty details and to register your product, please visit the official Steelcase webເວັບໄຊທ໌ ຫຼື ອ້າງອີງບັດຮັບປະກັນທີ່ມາພ້ອມກັບການຊື້ຂອງທ່ານ.
For further assistance, technical support, or to inquire about replacement parts, please contact Steelcase Customer Service through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.