RENOGY RNG-DCC1212-60-JP

Renogy DC-DC 12V 60A Battery Charger Instruction Manual

Model: RNG-DCC1212-60-JP

1. ຂໍ້ມູນຄວາມປອດໄພ

Please read all instructions and warnings in this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.

  • Always wear appropriate personal protective equipment, including eye protection, when working with batteries and electrical systems.
  • Ensure all connections are tight and secure to prevent loose connections that can cause excessive heat and damage.
  • Do not operate the charger in wet or damp ເງື່ອນໄຂ.
  • Ensure adequate ventilation around the charger to prevent overheating.
  • Disconnect all power sources before performing any maintenance or troubleshooting.
  • ຢ່າພະຍາຍາມຖອດ ຫຼື ສ້ອມແປງເຄື່ອງສາກໄຟດ້ວຍຕົນເອງ. ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.

2. ຜະລິດຕະພັນເກີນview

2.1 ລັກສະນະທີ່ສໍາຄັນ

  • ຄວາມເຂົ້າກັນໄດ້ຂອງແບັດເຕີຣີທີ່ຫຼາກຫຼາຍ: The Renogy DC-DC charger is compatible with multiple alternator types and sub-battery types, including AGM, flooded, gel, and lithium-ion batteries.
  • Smart 3-Stage ການສາກໄຟ: This battery charger charges the sub-battery from the starter battery using a 3-stage charging process (bulk, boost, float), ensuring optimal and automatic 100% charge.
  • Main Battery Over-Discharge Protection: The DC-DC battery charger identifies whether the generator is running, preventing over-discharge of the starter battery and protecting the main battery.
  • ປັບປຸງຄວາມປອດໄພ: Provides over-voltage protection, over-temperature protection, and reverse polarity protection, ensuring safe operation. It also isolates input and output to prevent voltage transmission errors and protect the house battery from overcharging.
  • ການອອກແບບທົນທານ: Features a compact and robust construction for reliable performance.

2.2 ຂະຫນາດຜະລິດຕະພັນ

Renogy DC-DC Charger with dimensions: 31.1 cm length, 17.5 cm width, 6.8 cm height

The image above shows the Renogy DC-DC Charger with its dimensions: 31.1 cm length, 17.5 cm width, and 6.8 cm height.

2.3 ລາຍລະອຽດພາກສ່ວນ

Diagram of Renogy DC-DC Charger ports and indicators

This diagram illustrates the various ports and indicators on the Renogy DC-DC Charger.

#ມາກລາຍລະອຽດ
1ປ້ອນຂໍ້ມູນ (+)Main Battery Positive
2ປ້ອນຂໍ້ມູນ (-)Main Battery Negative
3ຕົວຊີ້ວັດພະລັງງານຕົວຊີ້ວັດພະລັງງານ LED
4ຕົວຊີ້ວັດຄວາມຜິດພາດError Indicator LED
5S1 S2 S3 S4 S5Battery Type Setting Switch (DIP Switches)
6RJ11Temperature Sensor Connection Port
7D+Signal Line Connection Port
8LCCurrent Limit Port
9ຜົນໄດ້ຮັບ (+)Sub-battery Positive
10ຜົນໄດ້ຮັບ (-)Sub-battery Negative

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

3.1 ແຜນວາດການເຊື່ອມຕໍ່

Wiring diagram for Renogy DC-DC Charger connecting to main and sub-batteries in an RV

This diagram illustrates the wiring connections for the DC-DC Charger in a typical RV setup, connecting to both the main (starter) battery and the sub-battery (house battery).

  • DC-DC Charger ↔ Main Battery Wiring
  • DC-DC Charger ↔ Sub-battery Wiring
  • DC-DC Charger D+ Port ↔ Alternator D+ Terminal Wiring

ໝາຍເຫດ: All wiring requires separate purchase. Cables are not included with this product; please prepare them separately if needed.

3.2 DIP Switch Settings

DIP switch settings for Renogy DC-DC Charger to adjust battery type and charging voltage

The image shows the DIP switches used to configure the charger. By operating the 5 switches (S1-S5), you can adjust the battery type and charging voltage.

  • S1 and S2: Set Absorption Voltage
  • S3 and S4: ຕັ້ງຄ່າ Float Charge Voltage
  • S5: ຕັ້ງໂໝດການສາກໄຟ

3.3 ການເລືອກຂະໜາດສາຍ

Table showing recommended cable sizes and fuse ratings for different DC-DC charger models

Refer to this table for recommended cable sizes and fuse ratings based on your specific DC-DC charger model and cable length.

ຕົວແບບສາຍຂະໜາດສາຍເຄເບີ້ນຕໍ່າສຸດຟິວ
DCC-1212-20Main Battery0.61m 5.5sq2.44m 5.5sq4.88m 8.0sq9.75m 22sq30A
ແບດເຕີຣີຍ່ອຍ0.61m 3.5sq2.44m 3.5sq4.88m 5.5sq9.75m 14sq25A
DCC-1212-40Main Battery0.61m 14sq2.44m 14sq4.88m 22sq9.75m 38sq60A
ແບດເຕີຣີຍ່ອຍ0.61m 8.0sq2.44m 8.0sq4.88m 14sq9.75m 22sq50A
DCC-1212-60Main Battery0.61m 22sq2.44m 22sq90A
ແບດເຕີຣີຍ່ອຍ0.61m 14sq2.44m 14sq4.8m 22sq75A
D+/LC0.75~1.2SQ

3.4 D+ and LC Ports

Close-up of D+ and LC ports on Renogy DC-DC Charger

The image highlights the D+ and LC ports on the charger.

  • D+ Port: Connects to the alternator's D+ terminal for smart alternator detection.
  • LC Port: By connecting to the LC port, the charging current can be limited by half. (Recommended cable size: 0.75~1.2SQ)

4. ການດໍາເນີນງານ

4.1 3-ສtage ຂະບວນການສາກໄຟ

Graph illustrating the 3-stage charging process: Bulk, Absorption, and Float

The graph above illustrates the 3-stage charging process (Bulk, Absorption, Float) that fully charges the battery.

  • ສ່ວນຫຼາຍ: Charges the battery at the maximum current until it reaches a set voltage.
  • ການດູດຊຶມ: ປະຈຸໄຟຟ້າທີ່ປະລິມານຄົງທີ່tage, reducing current as the battery approaches full charge.
  • ເລື່ອນ: Maintains the battery at a constant, lower voltage to prevent self-discharge.

4.2 ຕົວຊີ້ວັດ LED

The charger features LED indicators to communicate the charging status and battery type. Refer to the tables below for detailed explanations.

ຕົວຊີ້ວັດປະເພດຫມໍ້ໄຟ
ສີສະຖານະລາຍລະອຽດ
ສີຂຽວONSLA (ເລີ່ມຕົ້ນ)
ສີເຫຼືອງONGEL
ສີແດງONFLD (ນໍ້າຖ້ວມ)
ສີຟ້າONLI (ລິທຽມ)
ສີຂາວONUser (Requires BT-2 Module and Renogy DC Home App)
ຕົວຊີ້ວັດຫມໍ້ໄຟບໍລິການ
ສີສະຖານະລາຍລະອຽດ
ສີຂຽວONແບັດເຕີຣີເຕັມ
ສີເຫຼືອງONຫມໍ້ໄຟ voltage ປົກກະຕິ
ສີແດງONຫມໍ້ໄຟ undervoltage
ສີແດງກະພິບຊ້າແບັດເຕີຣີໝົດແລ້ວ
ສີແດງກະພິບໄວຫມໍ້ໄຟເກີນ voltage/ອຸນຫະພູມເກີນ

ໝາຍເຫດ: ຕົວຊີ້ວັດການຊາດອາດປ່ຽນແປງພາຍໃຕ້ເງື່ອນໄຂດັ່ງຕໍ່ໄປນີ້:

  1. ສີແດງຫາສີເຫຼືອງ: ໃນເວລາທີ່ voltage ຮອດ 12.2V ພາຍໃຕ້ voltage ການຟື້ນຕົວ.
  2. ສີເຫຼືອງຫາສີແດງ: ເມື່ອ voltage ຫຼຸດລົງເປັນ 12.0V ພາຍໃຕ້ voltage ເຕືອນ.
  3. ສີເຫຼືອງຫາສີຂຽວ: A. ເມື່ອຮອດລະດັບຄົງທີ່tagສະຖານະການສາກໄຟ, ປະຈຸບັນການສາກໄຟມີຂະ ໜາດ ນ້ອຍກ່ວາ 3A, ຈະແກ່ຍາວເປັນເວລາ 30 ວິນາທີ; B. ເມື່ອກະແສສາກໄຟສູງກວ່າ 3A, ມັນສາມາດສາກໄຟໄດ້ຕະຫຼອດເວລາທີ່ມັນໄປຮອດລະດັບຄົງທີ່tagສະຖານະ e ແລະປະຈຸບັນຫຼຸດລົງຕໍ່າກວ່າ 3A, ຈະແກ່ຍາວເຖິງ 30 ວິນາທີ.
ຕົວຊີ້ວັດຕົວເລືອກ / ສາກໄຟ
ສີສະຖານະລາຍລະອຽດ
ສີຂຽວONຕົວເລືອກແມ່ນ ກຳ ລັງສາກແບັດເຕີຣີບໍລິການ
ສີແດງກະພິບຊ້າPV ກຳ ລັງສາກແບັດເຕີຣີເລີ່ມຕົ້ນ
ປິດບໍ່ໄດ້ສາກໄຟ

4.3 Alternator Type and Starting Battery Voltage

ປະເພດ AlternatorStarting Battery Voltage
ຕັດໃນຕັດອອກ
ຕົວປ່ຽນແບບດັ້ງເດີມ>13.2V, for 15 seconds<12.7V
ຕົວປ່ຽນອັດສະລິຍະ>12.0V, for 15 seconds<11.5V

4.4 Charging Current Distribution (Solar + Alternator)

ຕົວແບບRBC30DISRBC50DIS
ພຽງແຕ່ແສງຕາເວັນ30A50A
Only Alt30A50A
Solar + ALT15A + 15A25A + 25A

When using both solar and alternator inputs, the current is split. For example, the RBC30DIS model will provide 15A from solar and 15A from the alternator, totaling 30A.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your Renogy DC-DC Charger.

  • Periodically check all wiring connections for tightness and corrosion. Clean any corroded terminals.
  • Inspect the charger for any physical damage or signs of overheating.
  • Ensure the area around the charger is free from dust and debris to maintain proper ventilation.
  • Verify that the battery type settings are correct for your installed batteries.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your DC-DC Charger, refer to the following basic troubleshooting steps:

  • ບໍ່ມີໄຟ / LEDs ປິດ: Check all battery connections and fuses. Ensure the starter battery voltage is above the cut-in threshold.
  • Error Indicator On: Refer to the LED Indicators section (4.2) for the specific error type (over-voltage, over-temperature, reverse polarity, etc.) and take corrective action.
  • ແບັດເຕີຣີບໍ່ໄດ້ສາກ: Verify that the correct battery type is selected using the DIP switches. Check solar panel connections and output, and ensure the alternator is functioning correctly.
  • Reduced Charging Current: Ensure the LC port is not connected if full current is desired. Check cable sizes against recommendations in section 3.3.

For persistent issues, please contact Renogy customer support.

7. ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນຈໍາເພາະມູນຄ່າ
ຍີ່ຫໍ້ການປ່ຽນແທນ
ສີດຳ
ຂະໜາດສິນຄ້າ (ກວ້າງ x ຍາວ x ສູງ)17.5 x 31.1 x 6.8 cm
ຜົນໄດ້ຮັບ Voltage12 ໂວນ
ມາດຕະຖານການປະຕິບັດຕາມCE, RoHS
ອັນດັບປັດຈຸບັນ60 Amps
ໝາຍເລກຕົວແບບຂອງຜູ້ຜະລິດRNG-DCC1212-60-JP
GTIN (ເລກປະຈຳຕົວການຄ້າໂລກ)00810009715924
UPC810009715924
ປະເພດຜະລິດຕະພັນເຄື່ອງສາກໄຟ DC-DC
ອົງປະກອບລວມJapanese Instruction Manual, DC-DC Charger Unit

8. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ

This video provides a visual guide on how to install and connect the Renogy DC-DC MPPT Charger, demonstrating connections to a starter battery, a lithium house battery, and a solar panel. It also covers setting battery types and understanding LED indicators for charging status.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຜະລິດຕະພັນນີ້ມາພ້ອມກັບ a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 1 ປີ.

For any questions or support regarding your Renogy DC-DC Charger, please contact our customer service team:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.