Moukey Ultra-Low Noise 8-Channel Line Stereo Audio Mixer

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the Moukey MAMX3 Ultra-Low Noise 8-Channel Line Stereo Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Figure 1: Moukey MAMX3 8-Channel Line Stereo Audio Mixer

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• Do not expose this device to rain or moisture to avoid fire or electric shock.
• ຫ້າມເປີດຄasing. ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການພາຍໃນ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
• ຮັບປະກັນການສະຫນອງພະລັງງານ voltage ກົງກັບຄວາມຕ້ອງການທີ່ລະບຸໄວ້ໃນຫນ່ວຍງານ.
• ຫຼີກເວັ້ນການວາງເຄື່ອງໄວ້ໃກ້ກັບແຫຼ່ງຄວາມຮ້ອນ ຫຼືຢູ່ໃນແສງແດດໂດຍກົງ.
• ເຊັດໃຫ້ສະອາດດ້ວຍຜ້າແຫ້ງເທົ່ານັ້ນ. ຢ່າໃຊ້ນໍ້າຢາທຳຄວາມສະອາດ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ການປ້ອນຂໍ້ມູນ 8 ຊ່ອງ: Mix up to eight independent audio signals.
• Stereo/Mono Switching: Flexible input/output configuration for both stereo and mono signals. For stereo, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables. For mono, eight mono signal inputs are mixed into one mono signal output.
• ການຄວບຄຸມປະລິມານເອກະລາດ: Each input channel features a dedicated volume knob for precise level adjustment.
• ການເຮັດວຽກສຽງລົບກວນຕໍ່າຫຼາຍ: Designed for minimal distortion and excellent audio performance.
• ກະທັດຮັດ ແລະ ແບບພົກພາ: Space-saving design for easy transport and setup.
• ແຫຼ່ງພະລັງງານ DC 5V: Powered via DC 5V, offering versatile power options (e.g., USB port, power bank, 5V phone plug).
• ການກໍ່ສ້າງທົນທານ: ໂລຫະທີ່ແຂງແຮງ casing ensures longevity.

4. ຜະລິດຕະພັນເກີນview

The Moukey MAMX3 mixer features a straightforward layout for easy operation. Below are diagrams illustrating the controls and input/output ports.

ຮູບທີ 2: ການຄວບຄຸມແຜງດ້ານເທິງ

• Input 1-8 Level Knobs: Adjust the volume for each individual input channel.
• Mono/Stereo Switches: Select between mono or stereo operation for input channels.
• Channel Output Mix L-R Switch: Combines channels 1-4 and 5-8 into a single stereo output.
• Output A/B Level Knobs: Adjust the overall output volume for Output A and Output B.

Figure 3: Rear Panel Input/Output Ports

• INPUT 1-8 (1/4" TRS/TS): Connect your audio sources here.
• OUTPUT A (1/4" TRS): Main audio output.
• OUTPUT B A/B L-R (1/4" TRS): Secondary audio output, can be configured for A/B or Left/Right stereo.
• DC 5V (USB-C): ພອດປ້ອນພະລັງງານ.
• Pow Indicator: ສ່ອງແສງເມື່ອໜ່ວຍເປີດຢູ່.

ຮູບທີ 4: ຂະໜາດຜະລິດຕະພັນ

5. ຕັ້ງຄ່າ

5.1 ການເຊື່ອມຕໍ່ພະລັງງານ

1. Locate the DC 5V USB-C port on the rear panel of the mixer.
2. Connect the provided USB cable to the mixer and to a compatible 5V power source (e.g., computer USB port, power bank, or 5V phone charger).
3. The 'Pow' indicator light will illuminate, indicating the mixer is receiving power.

ຮູບທີ 5: ຕົວເລືອກການສະໜອງພະລັງງານ

5.2 ການເຊື່ອມຕໍ່ການປ້ອນຂໍ້ມູນສຽງ

1. Connect your audio sources (e.g., microphones, guitars, bass, keyboards, media players) to the INPUT 1-8 jacks using 1/4-inch TRS or TS cables.
2. For stereo input, use 1/4-inch (6.35mm) TRS stereo audio male-to-male cables and ensure the corresponding Mono/Stereo switch is set to 'Stereo'.
3. For mono input, use 1/4-inch TS cables and ensure the corresponding Mono/Stereo switch is set to 'Mono'.

5.3 ການເຊື່ອມຕໍ່ອອກສຽງ

1. Connect the OUTPUT A and/or OUTPUT B jacks to your amplifier, powered speakers, or recording device using 1/4-inch TRS cables.
2. ຮັບປະກັນວ່າການເຊື່ອມຕໍ່ທັງໝົດແມ່ນປອດໄພກ່ອນທີ່ຈະດໍາເນີນການຕໍ່ໄປ.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 ການເປີດ/ປິດ

The mixer powers on automatically when connected to a 5V power source. Disconnect the power cable to turn off the unit.

6.2 Adjusting Channel Levels

1. Turn all LEVEL knobs (1-8) and OUTPUT A/B knobs to their minimum position before playing any audio.
2. Start playing audio from your connected source.
3. Slowly increase the LEVEL knob for the corresponding input channel until the desired volume is achieved.
4. Adjust the OUTPUT A/B knobs to control the overall master volume.

ການເລືອກໂໝດ 6.3 ສະເຕີລິໂອ/ໂມໂນ

Use the Mono/Stereo switches above each channel to select the desired mode. For stereo operation, ensure you are using TRS cables for both input and output and the switch is set to 'Stereo'. For mono operation, set the switch to 'Mono'.

6.4 Mixing Multiple Sources

The MAMX3 allows you to mix up to eight line-level signals. Adjust each channel's LEVEL knob independently to create your desired mix. The Channel Output Mix L-R switch can combine channels 1-4 and 5-8 into a single stereo output for simplified routing.

Figure 6: Mixer in a typical setup

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the mixer. Do not use abrasive cleaners, solvents, or waxes.
• ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນ, ໃຫ້ເກັບຮັກສາເຄື່ອງປະສົມໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດ.
• ການດູແລສາຍໄຟ: Always handle cables by the connector, not the wire. Avoid bending or crimping cables excessively.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This Moukey MAMX3 mixer comes with a ຮັບປະກັນ 12 ເດືອນ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຄວາມບົກຜ່ອງດ້ານການຜະລິດແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.

ການຮັບປະກັນບໍ່ໄດ້ກວມເອົາຄວາມເສຍຫາຍທີ່ເກີດຈາກ:

• ການຕິດຕັ້ງຫຼືການດໍາເນີນງານທີ່ບໍ່ຖືກຕ້ອງ.
• ການດັດແກ້ຫຼືການສ້ອມແປງທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ.
• Accidents, misuse, or neglect.
• Natural disasters or power surges.

For technical support, warranty claims, or any questions regarding your Moukey MAMX3 mixer, please contact our customer service team through the retailer where you purchased the product or visit the official Moukey webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່.

ໝາຍເຫດ: ບໍ່ມີວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ URL (m3u8 format) was provided in the product data. Therefore, no video is embedded in this manual.