ແນະນຳ
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
ຂໍ້ມູນຄວາມປອດໄພ
ໃຫ້ປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຈາກໄຟໄໝ້, ໄຟຟ້າຊັອດ, ແລະ ການບາດເຈັບສ່ວນຕົວ. ຮັກສາພື້ນທີ່ເຮັດວຽກຂອງທ່ານໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງພຽງພໍ. ຢ່າໃຊ້ເຄື່ອງມືໄຟຟ້າໃນສະພາບແວດລ້ອມທີ່ມີລະເບີດ, ເຊັ່ນ: ໃນບ່ອນທີ່ມີຂອງແຫຼວໄວໄຟ, ອາຍແກັສ, ຫຼື ຝຸ່ນ. ໃຫ້ເດັກນ້ອຍ ແລະ ຜູ້ທີ່ຢືນເບິ່ງຢູ່ຫ່າງໄກໃນຂະນະທີ່ໃຊ້ເຄື່ອງມືໄຟຟ້າ.
ຄວາມປອດໄພທາງໄຟຟ້າ
- Ensure the power cord is compatible with the power source and is properly grounded.
- ຫລີກລ້ຽງການ ສຳ ພັດຂອງຮ່າງກາຍກັບ ໜ້າ ດິນເຊັ່ນ: ທໍ່, ລັງສີ, ຂອບເຂດ, ແລະຕູ້ເຢັນ.
- ຫ້າມບໍ່ໃຫ້ເຄື່ອງໃຊ້ໄຟຟ້າຖືກຝົນ ຫຼືສະພາບທີ່ປຽກ. ນ້ໍາເຂົ້າໄປໃນເຄື່ອງມືໄຟຟ້າຈະເພີ່ມຄວາມສ່ຽງຕໍ່ການຊ໊ອກໄຟຟ້າ.
- ຢ່າໃຊ້ສາຍບື. ຫ້າມໃຊ້ສາຍເພື່ອຖື, ດຶງ, ຫຼືຖອດສາຍໄຟ. ຮັກສາສາຍໄຟໃຫ້ຫ່າງຈາກຄວາມຮ້ອນ, ນໍ້າມັນ, ແຄມແຫຼມ, ຫຼືພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
ຄວາມປອດໄພສ່ວນຕົວ
- ໃສ່ເຄື່ອງປ້ອງກັນຕາສະເໝີ (ແວ່ນຕານິລະໄພ ຫຼືແວ່ນຕາ) ແລະປ້ອງກັນການໄດ້ຍິນ.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- ຕື່ນຕົວ, ສັງເກດເບິ່ງສິ່ງທີ່ເຈົ້າກໍາລັງເຮັດ, ແລະໃຊ້ຄວາມຮູ້ສຶກທົ່ວໄປໃນເວລາທີ່ໃຊ້ເຄື່ອງມືພະລັງງານ.
- ບໍ່ເກີນ. ຮັກສາຕີນທີ່ຖືກຕ້ອງແລະສົມດຸນຢູ່ຕະຫຼອດເວລາ.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
ອົງປະກອບ
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- ປ້ ຳ ນ້ ຳ ຍ່ອຍ
- Waterໍ້ນ້ ຳ
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Blade Wrench
- Hex Wrench
ຕັ້ງຄ່າ
ການຕັ້ງຄ່າທີ່ເໝາະສົມແມ່ນມີຄວາມສໍາຄັນຫຼາຍຕໍ່ການດໍາເນີນງານທີ່ປອດໄພແລະຖືກຕ້ອງ.
1. Assemble the Stand
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
ຮູບ 2: ເທິງລົງລຸ່ມ view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
ວິດີໂອທີ 1: ຈົບແລ້ວview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
ຄໍາແນະນໍາການດໍາເນີນງານ
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Rip Cuts: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- ການຕັດ Miter: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. ການຕັດ
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and performance of your tile saw.
1. ທໍາຄວາມສະອາດ
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. ການດູແລແຜ່ນ
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Store blades properly to prevent damage.
3. ການກວດກາທົ່ວໄປ
- ກວດເບິ່ງທຸກ fasteners ເປັນໄລຍະສໍາລັບຄວາມແຫນ້ນ.
- ກວດເບິ່ງສາຍໄຟສໍາລັບສັນຍານຄວາມເສຍຫາຍໃດໆ.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
ການແກ້ໄຂບັນຫາ
ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Saw ບໍ່ເລີ່ມຕົ້ນ | No power, faulty switch, tripped circuit breaker | Check power connection, test outlet, reset breaker, contact service if switch is faulty. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| ການຕັດບໍ່ຖືກຕ້ອງ | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
ຂໍ້ມູນຈໍາເພາະ
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- ໝາຍເລກຕົວແບບ: D36000S
- ແຫຼ່ງພະລັງງານ: ໄຟຟ້າສາຍ
- ມໍເຕີ: 15 Amp, 1220 MWO
- ສະບັບtage: 120V
- ວັດtage: 1800 ວັດ
- ຄວາມໄວ: 4200 RPM
- ເສັ້ນຜ່າສູນກາງໃບ: 10 ນິ້ວ
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 ນິ້ວ
- ຄວາມຖືກຕ້ອງ: 1/32 inch over 30 inches
- ນ້ໍາຫນັກລາຍການ: 91 ປອນ
- ຂະໜາດລາຍການ (L x W x H): 36"L x 31"W x 28.75"H
- ວັດສະດຸແຜ່ນ: Stainless Steel (for included blade)
- ຄຳແນະນຳພື້ນຜິວ: ປໍຊລິນ
- ຄຸນນະສົມບັດພິເສດ: Brake, Integrated storage, Water tray system
- ການຢັ້ງຢືນ: UL
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, service, or technical support, please refer to the official DEWALT webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າ DEWALT ໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.