TICCI T8VB Vibrating Alarm Watch User Manual

ແນະນຳ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

ຂໍ້ມູນຄວາມປອດໄພ

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Do not attempt to open the watch casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

ສິນຄ້າເກີນview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

ຮູບ 1: ດ້ານຫນ້າ view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

ປຸ່ມ A: Mode Selection / Backlight
ປຸ່ມ B: Set / Adjust Up
ປຸ່ມ C: Adjust Down / Start/Stop (Stopwatch/Countdown)
ປຸ່ມ D: ລັອກ/ປົດລັອກ

ຕັ້ງຄ່າ

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. ກໍານົດເວລາແລະວັນທີ

1. From the Time Mode display, press and hold ປຸ່ມ B for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. ກົດ ປຸ່ມ A to cycle through the settings: Hour → Minute → Year → Month → Date.
3. ໃຊ້ ປຸ່ມ B to increase the flashing value and ປຸ່ມ C ເພື່ອຫຼຸດມັນ.
4. ເມື່ອການຕັ້ງຄ່າທັງຫມົດຖືກປັບ, ກົດ ປຸ່ມ B ອີກເທື່ອຫນຶ່ງເພື່ອອອກຈາກໂຫມດການຕັ້ງຄ່າ.
5. To switch between 12-hour and 24-hour format, press ປຸ່ມ C while the hour digits are flashing during time setting.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ການເລືອກແບບ

ກົດ ປຸ່ມ A repeatedly to cycle through the different modes:

• ໂໝດເວລາ: ສະແດງເວລາປະຈຸບັນ, ວັນທີ, ແລະມື້ຂອງອາທິດ.
• ໂມດແຈ້ງເຕືອນ: Allows setting and managing up to 8 individual alarms.
• ແບບ Stopwatch: ສໍາລັບເຫດການເວລາ.
• ໂໝດນັບຖອຍຫຼັງ: ສຳລັບການຕັ້ງໂມງຈັບເວລານັບຖອຍຫຼັງ.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. ເຂົ້າ ໂໝດປຸກ ໂດຍການກົດ ປຸ່ມ A until "AL" appears on the display.
2. ກົດຄ້າງໄວ້ ປຸ່ມ B for approximately 2 seconds until the alarm number (1-8) flashes.
3. ໃຊ້ ປຸ່ມ A to select the alarm you wish to set (A1, A2, A3, etc.).
4. ກົດ ປຸ່ມ B to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. ໃຊ້ ປຸ່ມ B ເພື່ອປັບຊົ່ວໂມງແລະ ປຸ່ມ C ເພື່ອປັບນາທີ.
6. ຫຼັງຈາກກໍານົດເວລາ, ກົດ ປຸ່ມ A to select the alarm type:
   • ທັງສອງ: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. ກົດ ປຸ່ມ B to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use ປຸ່ມ A to select the alarm, then press ປຸ່ມ C to toggle its status.

3. ໂມງນັບຖອຍຫຼັງ

The countdown timer can be set from 15 minutes up to 24 hours.

1. ເຂົ້າ ແບບນັບຖອຍຫລັງ ໂດຍການກົດ ປຸ່ມ A until "TR" appears on the display.
2. ກົດຄ້າງໄວ້ ປຸ່ມ B for approximately 2 seconds until the hour digits flash.
3. ໃຊ້ ປຸ່ມ B ເພື່ອປັບຊົ່ວໂມງແລະ ປຸ່ມ C to adjust the minute for the countdown duration.
4. ກົດ ປຸ່ມ B to save the countdown setting.
5. ກົດ ປຸ່ມ C ເພື່ອເລີ່ມຕົ້ນ ຫຼືຢຸດການນັບຖອຍຫຼັງ.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. ໂມງຢຸດ

1. ເຂົ້າ ແບບ Stopwatch ໂດຍການກົດ ປຸ່ມ A until "ST" appears on the display.
2. ກົດ ປຸ່ມ C ເພື່ອເລີ່ມຕົ້ນການໂມງຢຸດ.
3. ກົດ ປຸ່ມ C ອີກເທື່ອໜຶ່ງເພື່ອຢຸດໂມງຈັບເວລາ.
4. ໃນຂະນະທີ່ຢຸດຊົ່ວຄາວ, ກົດ ປຸ່ມ B ເພື່ອຣີເຊັດໂມງຈັບເວລາເປັນສູນ.

5. ແສງຫຼັງ

ກົດ ປຸ່ມ A briefly in any mode to activate the super bright EL backlight for easy viewຢູ່ໃນສະພາບແສງສະຫວ່າງຕ່ໍາ.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• ເຖິງ ລັອກ the watch: Press and hold ປຸ່ມ B ແລະ ປຸ່ມ C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• ເຖິງ ປົດລັອກ the watch: Press and hold ປຸ່ມ B ແລະ ປຸ່ມ C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

ບໍາລຸງຮັກສາ

1. Water Resistance

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is ບໍ່ແນະນໍາ for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. ທໍາຄວາມສະອາດ

Clean the watch and strap regularly with a soft, damp ຜ້າ. ຫຼີກເວັ້ນການນໍາໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືວັດສະດຸຂັດ, ເຊິ່ງສາມາດທໍາລາຍການສໍາເລັດຮູບຫຼືປະທັບຕາ.

3. ການທົດແທນຫມໍ້ໄຟ

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

ການແກ້ໄຂບັນຫາ

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• ປຸ່ມບໍ່ຕອບສະໜອງ: The watch may be in lockout mode. Press and hold ປຸ່ມ B ແລະ ປຸ່ມ C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• ນ້ໍາພາຍໃນໂມງ: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

ຂໍ້ມູນຈໍາເພາະ

Figure 4: Watch dimensions.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI webເວັບໄຊ.