Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຮັກສາຜະລິດຕະພັນນີ້ໃຫ້ແຫ້ງສະເໝີ. ຫ້າມໃຊ້ໃນຍາມຝົນ ຫຼື ງamp ເງື່ອນໄຂ.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• ຢ່າ​ໃຊ້​ໜ່ວຍ​ແຟດ​ໃນ​ບ່ອນ​ມີ​ແກັສ​ໄວ​ໄຟ, ສານເຄມີ, ຫຼື​ວັດຖຸ​ອື່ນໆ.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. ຜະລິດຕະພັນເກີນview

3.1 ລັກສະນະທີ່ສໍາຄັນ

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• ຟັງຊັນທີ່ມີປະສິດທິພາບ: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• ການປ້ອງກັນຄວາມຮ້ອນເກີນ: Designed with protection against overheating for extended use.
• ປະສິດທິພາບປະສິດທິພາບ: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• ຟັງຊັນຊູມ: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• ຄວາມເຂົ້າກັນໄດ້ຢ່າງກວ້າງຂວາງ: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 ເນື້ອໃນຊຸດ

• 1 x Godox TT350N Flash Unit
• 1 x Mini Stand
• 1 x ກໍລະນີປ້ອງກັນ
• 1 x Color Filter
• 1 x ຄູ່ມືຜູ້ໃຊ້
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 ຊື່ສ່ວນ ແລະໜ້າທີ່

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. ປຸ່ມເລືອກໂໝດ
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. ປຸ່ມທົດສອບ/ຕົວຊີ້ບອກພ້ອມ Flash
5. ຈໍ LCD
6. ປຸ່ມ Sync ຄວາມໄວສູງ
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. ສະວິດໄຟ
10. ແຫວນລັອກ
11. ປຸ່ມ​ເລືອກ​ໄຮ້​ສາຍ (ປຸ່ມ​ທີ່​ໃຊ້​ຄືນ​ໄດ້​, ກົດ​ຍາວ​ສໍາ​ລັບ 2 ວິ​ນາ​ທີ​)
12. ເກີບຮັດ
13. ປຸ່ມຕັ້ງ
14. ເລືອກ Dial
15. ຊ່ອງໃສ່ຫມໍ້ໄຟ
16. ເຊັນເຊີຄວບຄຸມ Optic
17. Focus Assist Beam
18. ຫົວ Flash
19. ກະ​ດານ Catchlight
20. ແຜງກວ້າງໃນຕົວ

4. ຕັ້ງຄ່າ

4.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. ເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟທີ່ຕັ້ງຢູ່ດ້ານຂ້າງຂອງໜ່ວຍແຟລດ.
2. ໃສ່ໝໍ້ໄຟ AA ສອງໜ່ວຍຕາມຕົວຊີ້ບອກຂົ້ວ (+/-) ພາຍໃນຊ່ອງ.
3. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

4.2 ການຕິດຕັ້ງກັບກ້ອງຖ່າຍຮູບ

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 ເປີດ/ປິດ

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• ເພື່ອປິດເຄື່ອງ, ໃຫ້ເລື່ອນສະວິດໄຟໄປທີ່ຕຳແໜ່ງ 'ປິດ'.

5. ຮູບແບບການເຮັດວຽກ

The TT350N offers various flash modes to suit different shooting scenarios. Press the ໂໝດ ເພື່ອໝຸນວຽນຜ່ານໂໝດທີ່ມີຢູ່.

5.1 ໂໝດ TTL Autoflash

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• ກົດ ໂໝດ button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 ໂໝດແຟລດຄູ່ມື (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• ກົດ ໂໝດ button until 'M' is displayed.
• ຫັນ ເລືອກ Dial to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• ກົດ ໂໝດ ປຸ່ມຈົນກວ່າ 'ຫຼາຍອັນ' ຈະປາກົດຂຶ້ນ.
• ໃຊ້ ເລືອກ Dial ແລະ SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 ການຊິງຄ໌ຄວາມໄວສູງ (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• ກົດ Sync button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 ການຊົດເຊີຍການຮັບແສງ Flash (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• ໃນໂໝດ TTL, ກົດປຸ່ມ SET button. The FEC value will blink.
• ຫັນ ເລືອກ Dial to adjust the FEC value.
• ກົດ SET ກົດປຸ່ມອີກເທື່ອຫນຶ່ງເພື່ອຢືນຢັນ.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• ຫນ່ວຍງານແມ່ບົດ: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• ຫນ່ວຍງານສໍາລອງ: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• ໃຊ້ GR/CH ປຸ່ມ ແລະ ເລືອກ Dial to set the group (A, B, C) and channel (1-16).
• ໃຫ້ແນ່ໃຈວ່າຫນ່ວຍງານທັງຫມົດຖືກຕັ້ງເປັນຊ່ອງທາງດຽວກັນແລະກຸ່ມສໍາລັບການສື່ສານທີ່ເຫມາະສົມ.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• ໂໝດ S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• ໂໝດ S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the ຂ້າທາດ button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• ກົດຄ້າງໄວ້ C.Fn button for 2 seconds to enter the custom function settings menu.
• ໃຊ້ ເລືອກ Dial to navigate through the available functions.
• ກົດ SET button to select a function and then use the ເລືອກ Dial ເພື່ອປ່ຽນມູນຄ່າຂອງມັນ.
• ກົດ SET button again to confirm the change.
• ກົດຄ້າງໄວ້ C.Fn button again to exit the custom function settings.

8. ບໍາລຸງຮັກສາ

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• ເກັບຮັກສາແຟລດໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມທີ່ຮຸນແຮງ.
• Avoid strong impacts or dropping the unit.

9. ການແກ້ໄຂບັນຫາ

• Flash ບໍ່ໄຟ: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• ຜົນຜະລິດແຟລດມືດ/ສະຫວ່າງເກີນໄປ: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• ບັນຫາການກະຕຸ້ນໄຮ້ສາຍ: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. ຂໍ້ມູນຈໍາເພາະ

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webເວັບໄຊ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.