ຄູ່ມືຜູ້ໃຊ້ໄດຣເວີ Impact Beta 1972/18

1. ຜະລິດຕະພັນເກີນview

The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.

• ມໍເຕີ Digital Brushless: Provides increased power and efficiency.
• ແຮງບິດສູງ: Up to 75 Nm for demanding applications.
• ຄວາມໄວຕົວແປ: Up to 2100 RPM for versatile drilling and driving.
• LED Front Lighting: ເຮັດໃຫ້ມີແສງພື້ນທີ່ເຮັດວຽກເພື່ອການປັບປຸງການເບິ່ງເຫັນ.
• ການປົກປ້ອງຫມໍ້ໄຟ: Triple battery self-protection against overload and cell power differences.

Figure 1.1: The Beta 1972/18 Impact Driver, showcasing ການອອກແບບທີ່ຫນາແຫນ້ນແລະການຈັດການ ergonomic ຂອງມັນ.

2. ອົງປະກອບລວມ

Your Beta 1972/18 Impact Driver package includes the following items:

• Beta 1972/18 Impact Driver
• ແບັດເຕີຣີ Lithium-Ion 2 x 5Ah
• Quick Charger (80 minutes charging time)
• Hard Case for storage and transport
• Belt Clip (right/left mountable)

Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.

3. ການຕິດຕັ້ງແລະການປະກອບ

3.1 ການສາກແບັດເຕີຣີ

1. Connect the quick charger to a suitable power outlet.
2. Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
3. Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
4. ເມື່ອສາກໄຟແລ້ວ, ເອົາແບັດເຕີຣີອອກຈາກເຄື່ອງສາກ.

3.2 ການຕິດຕັ້ງແບັດເຕີຣີ

• Align the charged battery with the base of the impact driver.
• Slide the battery firmly into the tool until it locks securely.
• To remove, press the battery release buttons on the sides and slide the battery out.

3.3 ການຕິດຂັດເຂັມຂັດ

The belt clip can be attached to either the right or left side of the tool for convenient carrying.

1. Locate the screw hole on the side of the tool where you wish to attach the clip.
2. Align the belt clip with the hole and secure it with the provided screw.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການເປີດ/ປິດ ແລະການຄວບຄຸມຄວາມໄວ

• To power on the tool, press the trigger switch. The LED front light will illuminate.
• ເພື່ອປິດເຄື່ອງ, ປ່ອຍປຸ່ມກະຕຸ້ນ.
• The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
• Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.

4.2 ການປັບແຮງບິດ

The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.

4.3 Drilling and Driving

1. Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
2. Select the desired speed and torque setting.
3. ວາງເຄື່ອງມືໃຫ້ແຫນ້ນກັບ workpiece ໄດ້.
4. Press the trigger to begin drilling or driving. Apply steady, even pressure.
5. For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.

Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.

Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

• ຖອດແບດເຕີລີ່ທຸກຄັ້ງກ່ອນທີ່ຈະເຮັດຄວາມສະອາດ.
• ເຊັດເຄື່ອງມືທີ່ສະອາດ, ງamp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• ຮັກສາຊ່ອງລະບາຍອາກາດໃຫ້ສະອາດຂອງຂີ້ຝຸ່ນແລະສິ່ງເສດເຫຼືອ. ໃຊ້ອາກາດບີບອັດຖ້າຈໍາເປັນ.

5.2 ການດູແລແລະເກັບຮັກສາຫມໍ້ໄຟ

• ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ສຸດ.
• ສຳລັບການເກັບຮັກສາໃນໄລຍະຍາວ, ສາກແບັດເຕີຣີໃຫ້ມີຄວາມຈຸປະມານ 50%.
• ຢ່າເກັບຮັກສາແບັດເຕີຣີໄວ້ໃນສະພາບທີ່ບໍ່ມີປະຈຸເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ.

5.3 ການບໍາລຸງຮັກສາທົ່ວໄປ

• Regularly inspect the chuck for wear and tear.
• Check the power cord of the charger for any damage.
• ຮັບປະກັນວ່າສະກູ ແລະ ຕົວຍຶດທັງໝົດໃນເຄື່ອງມືນັ້ນແໜ້ນດີ.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Beta 1972/18 Impact Driver comes with a ຮັບປະກັນ 3 ປີ, ຮັບປະກັນຄວາມສະຫງົບຂອງຈິດໃຈກ່ຽວກັບຄຸນນະພາບແລະການປະຕິບັດຂອງຕົນ.

Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.

For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ເພື່ອຈຸດປະສົງການຮັບປະກັນ.

ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ, ທ່ານອາດຈະໄປຢ້ຽມຢາມ Beta Brand Page on Amazon.