1. ຜະລິດຕະພັນເກີນview
The Retekess TD006 is a 4-key waterproof call button designed for use in service environments such as restaurants, cafes, bars, banks, and factories. It functions as a table transmitter, allowing customers to easily request service. This device is compatible with Retekess T114 and T128 watch receivers (sold separately).
ຮູບ 1: ດ້ານຫນ້າ view of the Retekess TD006 Pager System with its antenna extended.
2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- ໜ້າທີ່ 4 ປຸ່ມ: Features 'Call', 'Cancel', 'Water', and 'Bill' buttons for comprehensive service requests.
- ຈໍສະແດງຜົນທີ່ສາມາດປັບແຕ່ງໄດ້: Includes two transparent plastic plates with magnets, allowing users to freely change the internal card paper for menus or advertisements.
- ຊີວິດຫມໍ້ໄຟຍາວ: Equipped with a built-in 12V/23A battery, providing over 20,000 launches for extended standby time and reduced battery replacement frequency.
- ໄລຍະຂະຫຍາຍ: An external antenna enables a transmission range of up to 300 meters (open space) and strong wall penetration, capable of transmitting through 10-15 walls in typical environments.
- ຄວາມເຂົ້າກັນໄດ້ຂອງຜູ້ຮັບ: Designed to work exclusively with Retekess T114 screen receivers and T128 watch receivers. A single button can activate one or multiple T128 watch receivers simultaneously.
- ການອອກແບບກັນນ້ໍາ: The call button features a waterproof construction, protecting it from spills and splashes.
3. ຄໍາແນະນໍາການຕິດຕັ້ງ
3.1 ການຕິດຕັ້ງຫມໍ້ໄຟ
The TD006 pager system comes with a pre-installed 12V/23A battery. No initial battery installation is typically required. For battery replacement, refer to the maintenance section.
3.2 Customizing the Display Card
The pager features a transparent acrylic holder for displaying custom cards. To insert or change a card:
- Gently separate the two transparent plastic plates at the top. They are held together by magnets.
- Insert your desired menu, advertisement, or instruction card between the two plates.
- Ensure the card is properly aligned and the plates are securely re-attached by the magnets.
Figure 2: Illustration of inserting a custom card into the pager's magnetic acrylic display.
3.3 Pairing with Receivers (T114/T128)
The TD006 call button must be paired with a compatible Retekess T114 screen receiver or T128 watch receiver to function. Refer to the instruction manual of your specific receiver model for detailed pairing procedures. Generally, the process involves putting the receiver into pairing mode and then pressing the desired button on the TD006 transmitter.
Figure 3: The TD006 pager is compatible with T128 watch pagers and T114 screen receivers. Receivers are not included.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
Once the TD006 call button is set up and paired with a receiver, operation is straightforward:
- Call Button (Red): Press this button to request general service. The paired receiver(s) will display the table number and alert the staff.
- Water Button (Blue): Press this button to specifically request water service.
- Bill Button (Blue): Press this button to request the bill.
- Cancel Button (Green): Press this button to cancel a previous service request.
Figure 4: A user pressing one of the service request buttons on the TD006 pager.
Video 1: This video demonstrates how to use call buttons in various service scenarios, providing a visual guide to the pager system's operation.
5. ບໍາລຸງຮັກສາ
5.1 ການທໍາຄວາມສະອາດ
The TD006 call button is waterproof. To clean, wipe the surface with a damp ຜ້າ. ຫຼີກລ່ຽງການໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ນໍ້າຢາທໍາຄວາມສະອາດທີ່ຂັດເຊິ່ງອາດຈະເຮັດໃຫ້ອຸປະກອນເສຍຫາຍໄດ້.
5.2 ການທົດແທນຫມໍ້ໄຟ
The TD006 uses a 12V/23A battery. When the transmission range decreases or the indicator light fails to illuminate upon button press, it may be time to replace the battery. To replace:
- Locate the battery compartment, typically on the underside or rear of the device.
- ເປີດຊ່ອງໃສ່ໂດຍໃຊ້ໄຂຄວງຂະໜາດນ້ອຍຖ້າຈຳເປັນ.
- Remove the old 12V/23A battery.
- Insert a new 12V/23A battery, ensuring correct polarity.
- ປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
Figure 5: The 12V/23A battery provides approximately 12 months of operation under normal use.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Pager button does not transmit signal. | ແບັດເຕີຣີຕໍ່າ ຫຼືຕາຍ. | Replace the 12V/23A battery. |
| Receiver does not respond to button press. | Pager not paired with receiver. | Refer to receiver manual for pairing instructions. |
| Signal range is shorter than expected. | Obstructions (thick walls, metal structures) or interference. | Ensure antenna is fully extended. Reposition pager or receiver to minimize obstructions. |
| ປຸ່ມບໍ່ຕອບສະໜອງ ຫຼື ຕິດຂັດ. | Debris or liquid under the button. | Clean the button area. If issue persists, contact support. |
7. ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: FF9460A (TD006)
- ຂະໜາດຜະລິດຕະພັນ: 6.22 x 3.94 x 1.93 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: 11.5 ອອນ
- ຜູ້ຜະລິດ: Retekess
- ແບັດເຕີຣີ: 1 x 12V/23A battery (included)
- ໄລຍະສາຍສົ່ງ: ສູງເຖິງ 300 ແມັດ (ພື້ນທີ່ເປີດ)
- ຄວາມເຂົ້າກັນໄດ້: Retekess T114 and T128 receivers
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, please refer to the documentation provided with your purchase or visit the official Retekess website. For technical support, troubleshooting assistance, or to inquire about compatible receivers and accessories, please contact Retekess customer service through their official channels.
ຊັບພະຍາກອນອອນໄລນ໌:
- Retekess Official Webເວັບໄຊ: www.retekess.com
- ຮ້ານ Amazon: ຮ້ານ Retekess ໃນ Amazon