1. ບົດແນະນຳ
Thank you for choosing the Everbeam H6 Pro LED Headlamp. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read it thoroughly before operation and retain it for future reference.
Image 1.1: Everbeam H6 Pro Headlamp with included accessories (USB cable and storage case).
2. ຜະລິດຕະພັນເກີນview
2.1 ລັກສະນະທີ່ສໍາຄັນ
- ຄວາມສະຫວ່າງ 650 Lumen: Provides powerful illumination up to 126 meters (413 feet).
- ໂໝດແສງຫຼາຍຮູບແບບ: Includes two white light brightness levels, SOS mode, and a red light mode.
- ການຄວບຄຸມເຊັນເຊີການເຄື່ອນໄຫວ: Allows hands-free operation by waving your hand in front of the sensor.
- ແບັດເຕີຣີທີ່ສາມາດສາກໄດ້: Built-in 1200mAh lithium-ion battery offers extended runtime.
- ການອອກແບບທົນທານ: IPX4 water resistance for protection against splashes and light rain.
- ນ້ຳໜັກເບົາ ແລະ ກະທັດຮັດ: Weighs approximately 72g (2.5oz) for comfortable wear.
2.2 ອົງປະກອບ
- Everbeam H6 Pro Headlamp
- Adjustable Elastic Headband
- ສາຍສາກ USB
- ຕູ້ເກັບມ້ຽນ
Image 2.1: Headlamp and its accessories, highlighting the 1200mAh battery capacity.
2.3 ການຄວບຄຸມແລະຕົວຊີ້ວັດ
ຮູບພາບ 2.2: ລາຍລະອຽດ view ຂອງ headl ໄດ້amp's controls and features.
- ປຸ່ມ Power / Mode: Controls power and cycles through white light modes.
- ປຸ່ມເຊັນເຊີ: Activates/deactivates motion sensor control.
- ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ: Detects hand gestures for hands-free operation.
- ໄຟ LED ສີຂາວ: Main illumination source.
- Red Light LEDs: Provides low-impact illumination, ideal for night vision preservation.
- ພອດສາກໄຟ USB: ສໍາລັບການ recharging ຫມໍ້ໄຟພາຍໃນ.
- ຕົວຊີ້ບອກພະລັງງານ: ສະແດງສະຖານະແບັດເຕີຣີ.
3. ຕັ້ງຄ່າ
3.1 ຄ່າບໍລິການເບື້ອງຕົ້ນ
- ກ່ອນທີ່ຈະນໍາໃຊ້ຄັ້ງທໍາອິດ, ສາກໄຟຫົວໃຫ້ເຕັມamp.
- Connect the supplied USB charging cable to the headlamp's USB charging port.
- Plug the other end of the cable into a standard USB power source (e.g., computer, wall adapter).
- The power indicator will show charging status (e.g., red for charging, green for fully charged).
- ໂດຍປົກກະຕິການສາກເຕັມຈະໃຊ້ເວລາປະມານ 3 ຊົ່ວໂມງ.
3.2 ການປັບສາຍແອວ
Image 3.1: The adjustable and comfortable elastic headband.
- ວາງຫົວamp ຢູ່ເທິງຫົວຂອງເຈົ້າ.
- Adjust the elastic strap using the buckles on either side to achieve a snug yet comfortable fit.
- ຫົວamp unit can be tilted up to 60 degrees to direct the light beam as needed.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1 ໂໝດເປີດ/ປິດ ແລະ ໂໝດໄຟ
- ເພື່ອເປີດ: Press the Power/Mode button once. The headlamp will activate in the last used white light mode.
- To Change White Light Modes: Press the Power/Mode button repeatedly to cycle through High White Light, Low White Light, and SOS White Light.
- ເພື່ອເປີດໃຊ້ໄຟສີແດງ: From any white light mode, press and hold the Power/Mode button for approximately 2 seconds. The headlamp will switch to Red Light mode.
- To Change Red Light Modes: In Red Light mode, press the Power/Mode button once to switch between steady Red Light and Red Strobe.
- ປິດ: Press the Power/Mode button until the light turns off, or press and hold the Power/Mode button for 2 seconds from any mode.
ຮູບພາບ 4.1: ຫົວamp providing 650 lumens of illumination in a dark environment.
4.2 Motion Sensor Control
The motion sensor allows for convenient hands-free operation, ideal when your hands are occupied.
- To Activate Sensor Mode: ກັບ headl ໄດ້amp on, press the Sensor button once. The sensor indicator light will illuminate.
- To Use Sensor Control: Wave your hand approximately 4-10 cm (1.5-4 inches) in front of the headlamp ເພື່ອເປີດຫຼືປິດໄຟ.
- To Deactivate Sensor Mode: Press the Sensor button again. The sensor indicator light will turn off.
Image 4.2: Demonstrating motion sensor use for hands-free operation.
5. ບໍາລຸງຮັກສາ
5.1 ການທໍາຄວາມສະອາດ
- ເຊັດຫົວamp ຮ່າງກາຍອ່ອນ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- Ensure the USB charging port cover is securely closed to maintain water resistance.
5.2 ການດູແລຫມໍ້ໄຟ
- To prolong battery life, recharge the headlamp regularly, even if not used frequently.
- ຫຼີກລ້ຽງການລະບາຍຫມໍ້ໄຟໃຫ້ຫມົດກ່ອນທີ່ຈະສາກໄຟ.
- ເກັບຮັກສາຫົວamp ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
5.3 ການເກັບຮັກສາ
- ເກັບຮັກສາຫົວamp in its provided case to protect it from dust and physical damage.
- ຮັກສາໃຫ້ອອກຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ຮຸນແຮງ.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫົວamp ບໍ່ເປີດ | ແບັດເຕີຣີຕໍ່າ. | ໄລ່ຫົວamp ຢ່າງເຕັມສ່ວນ. |
| ແສງສະຫວ່າງອ່ອນໆຫຼື flickers. | ແບັດເຕີຣີຕໍ່າ. | ຕື່ມເງິນຫົວamp. |
| ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວບໍ່ຕອບສະໜອງ. | Sensor mode not activated. Obstruction in front of sensor. | Ensure sensor mode is active (indicator light on). Clear any obstructions. Ensure hand is within 4-10 cm range. |
| ຫົວamp ບໍ່ສາກໄຟ. | ສາຍ ຫຼື ແຫຼ່ງພະລັງງານຜິດພາດ. | Try a different USB cable or power adapter. Ensure cable is securely connected. |
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | H6 Pro |
| ຄວາມສະຫວ່າງ (ແສງສີຂາວ) | 650 Lumens |
| ໄລຍະຫ່າງ Beam | ສູງເຖິງ 126 ແມັດ (413 ຟຸດ) |
| ປະເພດຫມໍ້ໄຟ | Built-in 1200mAh Lithium-Ion |
| Runtime (White Light High) | ປະມານ. 2.5 ຊົ່ວໂມງ |
| Runtime (White Light Low) | ປະມານ. 6.5 ຊົ່ວໂມງ |
| ເວລາແລ່ນ (ໄຟແດງ) | ສູງສຸດ 20 ຊົ່ວໂມງ |
| ເວລາສາກໄຟ | ປະມານ. 3 ຊົ່ວໂມງ |
| ການຕໍ່ຕ້ານນ້ໍາ | IPX4 (ກັນນໍ້າກະແຈກກະຈາຍ) |
| ນ້ຳໜັກ | 72g (2.5 oz) |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຂະໜາດ | 3.15"D x 2.37"W x 0.79"H |
ຮູບພາບ 7.1: ຫົວamp's IPX4 water resistance.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
8.1 ຂໍ້ມູນການຮັບປະກັນ
The Everbeam H6 Pro LED Headlamp ມາພ້ອມກັບ ກ ຮັບປະກັນ 2 ປີ ນັບຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຈາກການຜະລິດ ແລະ ຝີມືແຮງງານພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ. ມັນບໍ່ກວມເອົາຄວາມເສຍຫາຍທີ່ເກີດຈາກການໃຊ້ຜິດ, ອຸບັດຕິເຫດ, ການດັດແປງທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ, ຫຼື ການສວມໃສ່ ແລະ ການຈີກຂາດຕາມປົກກະຕິ.
8.2 ສະຫນັບສະຫນູນລູກຄ້າ
For technical assistance, warranty claims, or any questions regarding your Everbeam H6 Pro Headlamp, please contact Everbeam customer support through the retailer's platform or the official Everbeam website. Please have your purchase receipt and product model number (H6 Pro) available when contacting support.