ຄູ່ມືຜູ້ໃຊ້ Kebidumei USB 3.0 Sata HDD Adapter (5Gbps, 22Pin)

1. ບົດແນະນຳ

ຂອບໃຈສໍາລັບການຊື້asing the Kebidumei USB 3.0 SATA HDD Adapter. This adapter provides a convenient solution for connecting 2.5-inch and 3.5-inch SATA hard drives or SSDs to your computer via a USB 3.0 port, offering fast data transfer speeds of up to 5Gbps. It is designed for easy plug-and-play use, making data recovery, drive cloning, or external storage setup straightforward.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຢ່າໃຫ້ອະແດບເຕີຖືກຄວາມຊຸ່ມຊື່ນ ຫຼື ອຸນຫະພູມສູງເກີນໄປ.
ຫຼີກເວັ້ນການລຸດລົງຫຼືໃສ່ອະແດບເຕີເພື່ອຜົນກະທົບທີ່ເຂັ້ມແຂງ.
Ensure proper ventilation when in use, especially with 3.5-inch HDDs that may require external power.
Disconnect the adapter from the computer and power source (if applicable) before connecting or disconnecting a hard drive.
Use only the specified power adapter if one is required for 3.5-inch drives (power adapter not included with this specific model, typically for 2.5-inch drives).

3. ເນື້ອໃນຊຸດ

1 x Kebidumei USB 3.0 to SATA HDD Adapter (5Gbps, 22Pin)

Note: Hard drives/SSDs and external power adapters (for 3.5" HDDs) are sold separately.

4. ຕັ້ງຄ່າ

4.1 ການເຊື່ອມຕໍ່ອະແດບເຕີ

Follow these steps to connect your SATA hard drive or SSD to your computer using the Kebidumei USB 3.0 SATA HDD Adapter:

Ensure your computer is powered on and running.
Connect the 22-pin SATA connector of the adapter firmly to the SATA data and power ports on your 2.5-inch or 3.5-inch SATA hard drive/SSD.
If connecting a 3.5-inch HDD, connect an external 12V power adapter (not included) to the power input port on the SATA drive, if required by the drive. 2.5-inch drives typically draw sufficient power from the USB port.
Plug the USB 3.0 Type-A connector(s) of the adapter into an available USB 3.0 port on your computer. For optimal performance, use a USB 3.0 port (usually blue inside). If your adapter has two USB connectors, ensure both are plugged in for stable power delivery, especially for 2.5-inch drives.
ລະບົບປະຕິບັດການຂອງທ່ານຄວນກວດຫາ ແລະ ຕິດຕັ້ງໄດຣເວີທີ່ຈຳເປັນໂດຍອັດຕະໂນມັດ. ໄດຣຟ໌ຈະປາກົດເປັນອຸປະກອນເກັບຂໍ້ມູນໃໝ່.

Kebidumei USB 3.0 SATA HDD Adapter with two USB-A connectors and one SATA 22-pin connector — Image: The Kebidumei USB 3.0 SATA HDD Adapter. It features a black plastic housing with a 22-pin SATA connector on one end, designed to connect directly to a SATA hard drive or SSD. Extending from the housing are two black cables, each terminating in a USB Type-A connector. One USB connector is typically for data and power, while the second (often marked for power only) provides additional power for drives that require it, such as some 2.5-inch HDDs or for more stable operation.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການນໍາໃຊ້ອະແດບເຕີ

Once connected, the hard drive or SSD will be accessible through your computer's file explorer (Windows) or Finder (macOS). You can perform various operations:

ການໂອນຂໍ້ມູນ: ລາກແລະວາງ files to and from the connected drive. Enjoy fast transfer speeds thanks to USB 3.0.
ສຳ ຮອງ: Use the drive for backing up important data.
Cloning: Utilize disk cloning software to duplicate an existing drive.
ກູ້ຂໍ້ມູນ: Access data from old or non-booting drives.

5.2 ການຖອດໄດຣຟ໌ອອກຢ່າງປອດໄພ

Always safely eject the drive before physically disconnecting the adapter from your computer to prevent data corruption:

Windows: Click the "Safely Remove Hardware and Eject Media" icon in the system tray, then select the drive to eject.
macOS: Drag the drive icon from the desktop to the Trash, or right-click the drive icon and select "Eject".

6. ບໍາລຸງຮັກສາ

The Kebidumei USB 3.0 SATA HDD Adapter requires minimal maintenance:

ທໍາຄວາມສະອາດ: Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or solvents.
ການເກັບຮັກສາ: ເກັບຮັກສາອະແດບເຕີໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮຸນແຮງເມື່ອບໍ່ໄດ້ໃຊ້.
ການດູແລສາຍໄຟ: ຫຼີກລ່ຽງການງໍ ຫຼື ບິດສາຍໄຟຫຼາຍເກີນໄປເພື່ອປ້ອງກັນຄວາມເສຍຫາຍພາຍໃນ.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາ	ການແກ້ໄຂທີ່ເປັນໄປໄດ້
Drive not detected.	ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພ. ລອງໃຊ້ພອດ USB ອື່ນໃນຄອມພິວເຕີຂອງທ່ານ. If using a 3.5-inch HDD, ensure the external power adapter is connected and working. ກວດເບິ່ງ Disk Management (Windows) ຫຼື Disk Utility (macOS) ເພື່ອເບິ່ງວ່າໄດຖືກຮັບຮູ້ແຕ່ບໍ່ມີຮູບແບບຫຼືບໍ່ໄດ້ຈັດສັນ. Try connecting the adapter to another computer to rule out system-specific issues.
ຄວາມໄວການໂອນຂໍ້ມູນຊ້າ.	Ensure the adapter is connected to a USB 3.0 port (blue port). Verify that your hard drive/SSD supports USB 3.0 speeds. ປິດແອັບພລິເຄຊັນອື່ນທີ່ອາດຈະໃຊ້ຊັບພະຍາກອນຂອງລະບົບ.
Drive disconnects randomly.	Ensure sufficient power is supplied, especially for 2.5-inch HDDs that might need both USB connectors plugged in, or 3.5-inch HDDs requiring an external power adapter. ກວດເບິ່ງການເຊື່ອມຕໍ່ວ່າງ. Avoid using USB hubs if possible, or use a powered USB hub.

8. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດ	ລາຍລະອຽດ
ຊື່ຜະລິດຕະພັນ	Kebidumei USB 3.0 Sata HDD Adapter
ໝາຍເລກຕົວແບບ	KBT000663
ການໂຕ້ຕອບ	USB 3.0 (backward compatible with USB 2.0) to SATA 22Pin
ອັດຕາການໂອນຂໍ້ມູນ	Up to 5 Gbps (USB 3.0 SuperSpeed)
ໄດຣຟ໌ທີ່ເຂົ້າກັນໄດ້	ຮາດດິດ/SSD SATA ຂະໜາດ 2.5 ນິ້ວ / 3.5 ນິ້ວ
ຄວາມເຂົ້າກັນໄດ້ຂອງລະບົບປະຕິບັດການ	Windows, macOS, Linux (driver-free)
ສີ	ດຳ
ປະເພດຕົວເຊື່ອມຕໍ່	USB ປະເພດ A
ປະເພດສາຍ	USB

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This Kebidumei product comes with a standard manufacturer's warranty. Please refer to the retailer's policy or the product packaging for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or visit the official Kebidumei website for contact information. When contacting support, please have your product model number (KBT000663) and purchase details ready.

Kebidumei is committed to providing high-quality products and customer satisfaction.

kebidumei KBT000663

Kebidumei USB 3.0 Sata HDD Adapter User Manual