ລຳໂພງ Bluetooth ໄຮ້ສາຍແບບພົກພາ HyperGear Wave ຄູ່ມືຜູ້ໃຊ້ 14704

ແນະນຳ

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasing ການ​ອອກ​ແບບ​ກັນ​ນ​້​ໍ​າ​ຂອງ​ຕົນ​ທີ່​ມີ splashing ນ​້​ໍ​າ​.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• ສາຍສາກ Micro USB
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

ຕັ້ງຄ່າ

1. ການສາກໄຟ ລຳ ໂພງ

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. ເປີດ / ປິດພະລັງງານ

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ການຈັບຄູ່ Bluetooth

1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. ເມື່ອຈັບຄູ່ແລ້ວ, ລຳໂພງຈະປ່ອຍສຽງຢືນຢັນ, ແລະໄຟ LED ຈະສະຫວ່າງຂຶ້ນ.

ລຳໂພງຈະພະຍາຍາມເຊື່ອມຕໍ່ໃໝ່ກັບອຸປະກອນທີ່ຈັບຄູ່ສຸດທ້າຍໂດຍອັດຕະໂນມັດເມື່ອເປີດເຄື່ອງ.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. ການຄວບຄຸມພື້ນຖານ

• ຫຼິ້ນ/ຢຸດ: ກົດປຸ່ມຫຼິ້ນ/ຢຸດຊົ່ວຄາວໜຶ່ງຄັ້ງ.
• ປະລິມານຂຶ້ນ: ກົດປຸ່ມ '+'.
• ປະລິມານລົງ: ກົດປຸ່ມ '-'.
• ເພງຕໍ່ໄປ: ກົດປຸ່ມ '+' ຄ້າງໄວ້.
• ຕິດຕາມກ່ອນ ໜ້າ ນີ້: ກົດປຸ່ມ '-' ຄ້າງໄວ້.
• ຮັບ/ສາຍໂທ: ກົດປຸ່ມຫຼິ້ນ/ຢຸດຊົ່ວຄາວໜຶ່ງຄັ້ງໃນລະຫວ່າງສາຍໂທເຂົ້າ.
• ປະຕິເສດການໂທ: ກົດປຸ່ມຫຼິ້ນ/ຢຸດຄ້າງໄວ້ໃນລະຫວ່າງສາຍໂທເຂົ້າ.

3. ຮູບແບບການປ້ອນຂໍ້ມູນສຽງ

The HyperGear Wave speaker supports multiple audio input options:

• ແບບບູທູດ: Default wireless connection.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• ໂໝດ Micro SD: Insert a Micro SD card (not included) with audio files ເຂົ້າໄປໃນຊ່ອງທີ່ກຳນົດໄວ້. ລຳໂພງຈະກວດຫາ ແລະ ຫຼິ້ນເພງຈາກບັດໂດຍອັດຕະໂນມັດ.

ຮູບພາບ: A close-up view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ອ່ອນ, ງamp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• ການເປີດເຜີຍນ້ໍາ: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• ການເກັບຮັກສາ: ເກັບຮັກສາລໍາໂພງໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກອຸນຫະພູມສູງສຸດແລະແສງແດດໂດຍກົງ.
• ການດູແລຫມໍ້ໄຟ: ເພື່ອຍືດອາຍຸແບັດເຕີລີ, ຫຼີກເວັ້ນການຖອດລໍາໂພງອອກເລື້ອຍໆ. ສາກໄຟເປັນປະຈຳ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນກໍຕາມ.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

ການແກ້ໄຂບັນຫາ

• Speaker will not turn on: ໃຫ້ແນ່ໃຈວ່າໄດ້ສາກໄຟແລ້ວ. ເຊື່ອມຕໍ່ສາຍສາກແລ້ວລອງອີກຄັ້ງ.
• ບໍ່ສາມາດຈັບຄູ່ກັບອຸປະກອນ Bluetooth:
  • ໃຫ້ແນ່ໃຈວ່າລຳໂພງຢູ່ໃນໂໝດຈັບຄູ່ (ໄຟ LED ກະພິບ).
  • ໃຫ້ແນ່ໃຈວ່າ Bluetooth ຖືກເປີດໃຊ້ຢູ່ໃນອຸປະກອນຂອງທ່ານ.
  • ຍ້າຍລຳໂພງເຂົ້າໃກ້ອຸປະກອນຂອງທ່ານ (ພາຍໃນ 33 ຟຸດ).
  • ປິດ ແລະເປີດທັງລຳໂພງ ແລະ Bluetooth ຂອງອຸປະກອນຂອງທ່ານ.
  • ລືມລຳໂພງຈາກລາຍການ Bluetooth ຂອງອຸປະກອນຂອງທ່ານ ແລະພະຍາຍາມຈັບຄູ່ຄືນໃໝ່.
• ບໍ່ມີສຽງ ຫຼືສຽງຕໍ່າ:
  • ປັບລະດັບສຽງໃນທັງລຳໂພງ ແລະອຸປະກອນທີ່ເຊື່ອມຕໍ່ຂອງທ່ານ.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • ກວດເບິ່ງວ່າແຫຼ່ງສຽງກຳລັງຫຼິ້ນຢູ່.
• ຄຸນະພາບສຽງບໍ່ດີ:
  • ຍ້າຍລຳໂພງໃຫ້ໃກ້ກັບອຸປະກອນ Bluetooth ຂອງທ່ານຫຼາຍຂຶ້ນເພື່ອຫຼີກເວັ້ນການລົບກວນ.
  • ໃຫ້ແນ່ໃຈວ່າບໍ່ມີສິ່ງກີດຂວາງລະຫວ່າງລໍາໂພງແລະອຸປະກອນຂອງທ່ານ.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear webເວັບໄຊ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear webເວັບໄຊ: www.hypergear.com.