ແນະນຳ
This manual provides instructions for the assembly, operation, and maintenance of your VonHaus Triple Monitor Stand. This stand is designed to support three monitors, ranging from 13 to 32 inches, with VESA compatibility of 75x75mm and 100x100mm. It features gas spring arms for easy adjustment and can be mounted using a desk clamp or grommet base, helping to free up valuable desk space.
Image: The VonHaus Triple Monitor Stand helps to free up desk space, providing a tidier and more organized appearance for your workstation.
ຂໍ້ມູນຄວາມປອດໄພ
WARNING: Read all instructions before assembly and use. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure your desk surface is strong enough to support the combined weight of the stand and three monitors.
- Do not exceed the maximum weight capacity of 7kg (15.4 lbs) per arm.
- ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງໄວ້ໄກໃນລະຫວ່າງການຊຸມນຸມ.
- Use only the provided hardware. Do not substitute parts.
- ກວດເບິ່ງທຸກການເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຮັກສາຄວາມປອດໄພ.
ເນື້ອໃນຊຸດ
Verify all components are present before beginning assembly. If any parts are missing or damaged, contact VonHaus customer service.
- Main Pole and Base
- Monitor Arms (3)
- VESA Plates (3)
- ໂຕະ Clamp ສະພາແຫ່ງ
- Grommet Base Assembly
- ຊຸດຮາດແວ (ສະກູ, ແຜ່ນຮອງ, ກະແຈ Allen)
- ຄລິບການຈັດການສາຍ
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This monitor stand offers two installation methods: Desk Clamp and Grommet Base. Choose the method best suited for your desk.
Image: The stand offers easy installation with two mounting options: Desk Clamp for desk thicknesses of 10-85mm, and Grommet Base for desk thicknesses of 10-40mm and hole diameters of 10-60mm.
ຂັ້ນຕອນທີ 1: ເລືອກວິທີການຕິດຕັ້ງ
- ໂຕະ Clamp: ຄັດຕິດ clamp ໄປຫາຂອບໂຕະຂອງທ່ານ. ໃຫ້ແນ່ໃຈວ່າamp is securely tightened to a desk thickness between 10-85mm.
- ຖານ Grommet: If your desk has a pre-drilled hole, secure the grommet base through the hole. This method is suitable for desk thicknesses between 10-40mm and hole diameters between 10-60mm.
Step 2: Assemble the Pole and Arms
- Attach the main pole to your chosen base (desk clamp ຫຼື grommet).
- Slide the monitor arms onto the main pole at the desired initial height.
ຂັ້ນຕອນທີ 3: ແນບແຜ່ນ VESA ໃສ່ຈໍພາບ
- Secure the VESA plates to the back of each monitor using the appropriate screws from the hardware kit. Ensure your monitor's VESA patterns (75x75mm or 100x100mm) match the plate.
ຂັ້ນຕອນທີ 4: ຕິດຕັ້ງຈໍພາບໃສ່ແຂນ
- Carefully slide each monitor (with VESA plate attached) onto the corresponding arm.
- Secure with the provided locking mechanism.
ຂັ້ນຕອນທີ 5: ການຈັດການສາຍ
- Route monitor cables through the integrated cable management clips on the arms and pole for a tidy setup.
ຄໍາແນະນໍາການດໍາເນີນງານແລະການປັບຕົວ
The VonHaus Triple Monitor Stand allows for flexible positioning of your screens to achieve optimal viewໃນຄວາມສະດວກສະບາຍແລະຜົນຜະລິດ.
Image: The monitor stand offers extensive adjustability, including 180° tilt, 360° swivel, and height adjustment up to 40.7 cm, allowing for ergonomic positioning.
- ການປັບຄວາມສູງ: Loosen the collar on the main pole to slide the arms up or down to your desired height. Retighten the collar to secure the arms in place.
- Gas Spring Tension: Adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, or counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height when moved freely.
- ອຽງ: Each monitor can be tilted +35° to -35° to reduce glare and optimize viewມຸມ.
- ໝູນ: The arms allow for a 360° swivel, enabling you to share your screen or adjust for different tasks.
- ໝຸນ: Rotate monitors 180° for quick switching between landscape and portrait orientation.
Image: The VonHaus Triple Monitor Stand is compatible with a wide range of screens, typically 13-27 inches, and supports VESA 75x75mm and 100x100mm mounting patterns.
ບໍາລຸງຮັກສາ
- Regularly inspect all mounting hardware and connections to ensure they are tight and secure.
- ເຮັດຄວາມສະອາດຂາຕັ້ງດ້ວຍຜ້າອ່ອນ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ຢ່າຫລໍ່ລື່ນກົນໄກຂອງສະປິງແກັສ.
ການແກ້ໄຂບັນຫາ
- ຕິດຕາມການຢ່ອນຕົວ ຫຼື ບໍ່ຮັກສາຕຳແໜ່ງ: Adjust the gas spring tension. Turn the adjustment screw clockwise to increase tension for heavier monitors.
- ຈໍພາບຍາກທີ່ຈະຍ້າຍ: Adjust the gas spring tension. Turn the adjustment screw counter-clockwise to decrease tension for lighter monitors.
- ຢືນຮູ້ສຶກບໍ່ໝັ້ນຄົງ: ຮັບປະກັນ desk clamp or grommet base is securely tightened to the desk. Verify all arm connections are secure.
- Monitors are not level: Fine-tune the height and tilt of individual arms until all screens are aligned.
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້: | ວອນຮົວ |
| ຕົວແບບ: | Triple Monitor Stand |
| ວັດສະດຸ: | ອາລູມີນຽມ |
| ປະເພດການຕິດຕັ້ງ: | Table Mount (Desk Clamp ຫຼື ກຣອມເມັດ) |
| Compatible Screen Size: | 13-32 ນິ້ວ |
| ຄວາມເຂົ້າກັນໄດ້ກັບ VESA: | 75x75mm, 100x100mm |
| Maximum Weight Capacity per Arm: | 7 ກິໂລ (15.4 ປອນ) |
| ລະດັບອຽງ: | +35° ເຖິງ -35° |
| ໄລຍະການຫມຸນ: | 360° |
| ໝຸນ: | 180° |
| ໂຕະ Clamp ຄວາມໜາ: | 10-85ມມ |
| Grommet Base Desk Thickness: | 10-40ມມ |
| Grommet Hole Diameter: | 10-60ມມ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This VonHaus Triple Monitor Stand comes with a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 5 ປີ. For warranty claims or technical support, please contact VonHaus customer service. Keep your proof of purchase for validation.
Image: The versatile design of the VonHaus Triple Monitor Stand makes it suitable for multiple workstations, whether for work, gaming, or general browsing.