ແນະນຳ
This manual provides essential instructions for the safe and effective use of the GÜDE 55369 GHF 800 Manual Tile Cutter. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.
ຄໍາແນະນໍາຄວາມປອດໄພ
Always prioritize safety when operating any tools. Failure to follow these instructions may result in injury or damage to the tool.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE), ລວມທັງແວ່ນຕາຄວາມປອດໄພແລະຖົງມື.
- Ensure the work surface is stable, level, and clean.
- ໃຫ້ເດັກນ້ອຍ ແລະຜູ້ຢືນຢູ່ຫ່າງຈາກບ່ອນເຮັດວຽກ.
- Inspect the tile cutter for any damage before each use. Do not use if damaged.
- Handle tiles carefully; edges can be sharp after cutting.
- Do not force the cutting wheel. Apply steady, even pressure.
- Ensure the tile is properly secured on the anti-slip support before cutting.
ສ່ວນປະກອບເກີນview
Familiarize yourself with the parts of your GÜDE GHF 800 Manual Tile Cutter.
- Cutting Handle: ອອກແບບ ergonomically ສໍາລັບການດໍາເນີນງານສະດວກສະບາຍ.
- ລໍ້ຕັດ: Hardened tungsten carbide wheel for precise scoring.
- ລາງລົດໄຟນຳທາງ: Provides a stable path for the cutting head.
- ແຜ່ນຮອງ: Stable aluminum base for secure tile placement.
- Anti-slip Support: Ensures the tile remains stationary during cutting.
- Adjustable Stop/Angle Guide: For precise measurement and angled cuts.
- Fold-out Tile Supports: Extendable supports on both sides for larger tiles.
ຕັ້ງຄ່າ
Before using the tile cutter, ensure it is properly set up.
- ການຫຸ້ມຫໍ່: Carefully remove all components from the packaging. Check for any shipping damage.
- ການຈັດວາງ: Place the tile cutter on a stable, flat, and clean work surface. Ensure there is enough space around the cutter for safe operation and tile handling.
- Extend Tile Supports: For larger tiles, unfold the side tile supports (30 cm each) to provide additional stability.
ຮູບທີ 2: Fold-out tile support. This image shows one of the side supports extended, providing additional surface area for larger tiles. - Adjustable Stop: Position the adjustable stop according to the desired tile dimension. Secure it firmly.
ຮູບທີ 3: Tile placement and adjustable stop. This image illustrates a tile positioned on the cutter, with the adjustable stop set for a precise cut, indicating a maximum tile size of 80x80 cm.
ການດໍາເນີນງານ
Follow these steps for effective and safe tile cutting.
- ກຽມກະເບື້ອງ: Clean the tile surface. Mark the desired cut line clearly with a pencil or marker.
- ວາງກະເບື້ອງ: Place the tile on the base plate, aligning the marked cut line with the cutting wheel's path. Ensure the tile rests firmly against the anti-slip support and the adjustable stop.
ຮູບທີ 4: Tile positioning for a straight cut. This image shows a tile correctly placed on the cutter, ready for the scoring process. - ໃຫ້ຄະແນນກະເບື້ອງ:
- Position the cutting wheel at the edge of the tile furthest from you.
- Apply firm, consistent downward pressure on the cutting handle.
- Push the cutting handle smoothly and steadily across the tile towards you in a single, continuous motion. Do not make multiple passes. A distinct scoring sound should be heard.
ຮູບທີ 5: Scoring the tile. This image focuses on the cutting wheel as it scores a line across the tile surface. - ທຳລາຍກະເບື້ອງ:
- Once the tile is scored, position the breaking foot (part of the cutting head) directly over the scored line, near the edge of the tile closest to you.
- Apply quick, firm downward pressure on the cutting handle. The tile should snap cleanly along the scored line.
- For diagonal cuts, use the angle guide and ensure the tile is securely placed.
ຮູບທີ 6: Performing a diagonal cut. This image demonstrates the tile cutter being used to make an angled cut on a tile. - ສໍາເລັດຮູບ: Carefully remove the cut tile pieces. Edges may be sharp and may require light sanding or filing for a smooth finish.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and performance of your tile cutter.
- ທໍາຄວາມສະອາດ: After each use, clean the base plate, guide rails, and cutting head to remove tile dust and debris. Use a dry cloth or brush.
- ການລະບາຍສີ: Periodically apply a light lubricant to the guide rails and the cutting wheel axle to ensure smooth operation.
- ລໍ້ຕັດ: The tungsten carbide cutting wheel is durable but will eventually wear out. Replace the cutting wheel when cuts become inconsistent or require excessive force.
ຮູບທີ 7: Hardened cutting wheel and ergonomic handle. This image provides a detailed view of the durable cutting wheel and the comfortable grip of the handle. - ການເກັບຮັກສາ: Store the tile cutter in a dry, clean place, away from direct sunlight and extreme temperatures.
ການແກ້ໄຂບັນຫາ
ອ້າງອີງໃສ່ພາກນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂຂອງພວກເຂົາ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Uneven or jagged cuts |
|
|
| ກະເບື້ອງບໍ່ແຕກຢ່າງສະອາດ |
|
|
| Cutting head sticks or moves roughly |
|
|
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 55369 |
| ຄວາມຍາວຕັດສູງສຸດ | 800 ມມ (80 ຊຕມ) |
| Maximum Tile Dimensions | 800 x 800 mm (for diagonal cuts) |
| Maximum Tile Thickness | 12 ມມ |
| ຕັດເສັ້ນຜ່າສູນກາງລໍ້ | 22 ມມ |
| Cutting Wheel Material | Tungsten Carbide |
| Base Plate Material | ອາລູມີນຽມ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 105.4 x 86 x 39 cm |
| ນ້ໍາຫນັກລາຍການ | 7.4 ກິໂລກຣາມ |
| ການຈັດການວັດສະດຸ | ໂພລີໂພລີນ |
| ພື້ນຜິວທີ່ແນະນໍາ | Ceramic, Porcelain |
| ແຫຼ່ງພະລັງງານ | ມືພະລັງງານ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ສໍາລັບຂໍ້ມູນການຮັບປະກັນຫຼືການສະຫນັບສະຫນູນດ້ານວິຊາການ, ກະລຸນາອ້າງອີງເຖິງເຈົ້າຫນ້າທີ່ຂອງຜູ້ຜະລິດ webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
Manufacturer: GÜDE GmbH & Co.KG
Contact information can typically be found on the product packaging or the official GÜDE webເວັບໄຊ.