Amazon Basics ZIQ53910
Amazon Basics Front Door Lock Set: Shelby Lever Handleset Instruction Manual
Model: ZIQ53910 | Oil Bronze Finish
ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Front Door Lock Set. This handleset features a Shelby Lever and a single cylinder lock, designed for exterior use. It is finished in Oil Bronze and offers Grade-3 Security certified by ANSI/BHMA.
Please read these instructions thoroughly before beginning installation to ensure proper function and security.

ຮູບພາບ: The complete Amazon Basics Front Door Lock Set, featuring the Shelby Lever handleset and single cylinder deadbolt in an Oil Bronze finish.

ຮູບພາບ: ເກີນview of key features for the Amazon Basics handleset, highlighting Certified Grade-3 Security, compatibility with both left and right-handed doors (1-3/8 to 1-3/4 inches thick), and easy installation with a Phillips head screwdriver.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Before installation, ensure your door meets the compatibility requirements. This handleset is designed for doors 1-3/8 to 1-3/4 inches thick and features a 6-way adjustable latch to fit 2-3/8-inch or 2-3/4-inch backsets.
ເນື້ອໃນຊຸດ
Verify all components are present before starting installation.

ຮູບພາບ: All components of the Amazon Basics Handleset, including the exterior handleset, interior lever, deadbolt, two latches, two strike plates, keys, and various screws for installation.
- Exterior Handleset with Deadbolt
- ການປະກອບຄັນຍົກພາຍໃນ
- Deadbolt Latch
- ລວກພາກຮຽນ spring
- Strike Plates (for deadbolt and latch)
- screws ການຕິດຕັ້ງ
- ກະແຈ
Door Compatibility and Dimensions
Ensure your door's existing bore holes and dimensions match the requirements for this handleset. Refer to the diagram below for critical measurements.

ຮູບພາບ: Door Compatibility Guide illustrating the dimensions of the exterior handleset (12 inches total length, 2.7 inches width), deadbolt (2.4 inches width), and interior lever (4.1 inches length, 2.5 inches width). It also shows how to determine left-handed and right-handed door configurations.

ຮູບພາບ: Detailed diagram for door preparation, indicating measurements for backset (2-3/8 or 2-3/4 inches), distance between bore holes (5 inches), hole diameter (2-1/8 inches), and door thickness (1-3/8 to 2 inches).
ຂັ້ນຕອນການຕິດຕັ້ງ
- ກະກຽມປະຕູ: If installing on a new door, drill holes according to the provided template and dimensions. For replacement, ensure existing holes match.
- ຕິດຕັ້ງກະແຈ: Insert the deadbolt latch and the spring latch into the door edge. Ensure the bevel of the latch faces the door frame. Secure with screws.
- ຕິດຕັ້ງຊຸດມືຈັບພາຍນອກ: Place the exterior handleset through the lower bore hole, aligning the spindle with the spring latch.
- Install Interior Lever: Attach the interior lever assembly, ensuring the spindle engages correctly with the spring latch. Secure with mounting screws.
- Install Deadbolt Cylinder: Insert the exterior deadbolt cylinder into the upper bore hole.
- Install Interior Deadbolt Thumbturn: Attach the interior deadbolt thumbturn assembly, ensuring the tailpiece engages with the deadbolt mechanism. Secure with screws.
- Adjust Latch (if necessary): The 6-way adjustable latch can be configured for 2-3/8-inch or 2-3/4-inch backsets. Follow instructions on the latch mechanism to adjust.
- ການປະຕິບັດການທົດສອບ: Close the door and test the deadbolt and lever functions with the key and thumbturn from both sides to ensure smooth operation.
A Phillips head screwdriver (not included) is required for installation.
ການດໍາເນີນງານ
This handleset provides secure entry and exit for your front door.
ລັອກປະຕູ
- ຈາກພາຍນອກ: Insert the key into the deadbolt cylinder and turn to extend the deadbolt. Remove the key. The handleset lever can be locked by pressing the button on the interior side before closing the door, or by using the key from the exterior.
- ຈາກພາຍໃນ: Rotate the thumbturn on the deadbolt to extend the deadbolt. The interior lever can be locked by pressing the button on the lever assembly.
ປົດລັອກປະຕູ
- ຈາກພາຍນອກ: Insert the key into the deadbolt cylinder and turn to retract the deadbolt. Turn the Shelby lever to open the door.
- ຈາກພາຍໃນ: Rotate the thumbturn on the deadbolt to retract the deadbolt. Press down on the Shelby lever to open the door.

ຮູບພາບ: The Amazon Basics Handleset in Oil Bronze, installed on the exterior of a door, demonstrating its appearance and functionality.

ຮູບພາບ: ພາຍໃນ view of the Amazon Basics Handleset, showing the thumbturn for the deadbolt and the Shelby lever for the latch, installed on a door.
ບໍາລຸງຮັກສາ
Regular maintenance helps ensure the longevity and smooth operation of your door lock set.
- ທໍາຄວາມສະອາດ: ທຳຄວາມສະອາດພາຍນອກດ້ວຍຜ້ານຸ້ມໆ, ຜ້າເຊັດໂຕamp ຜ້າ. ຫຼີກເວັ້ນການຂັດຂັດ, ສານລະລາຍ, ຫຼືສານເຄມີທີ່ຮຸນແຮງ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍການສໍາເລັດຮູບ.
- ການລະບາຍສີ: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and the latch mechanisms to maintain smooth operation. Do not use oil-based lubricants as they can attract dirt.
- Tighten screws: Check all mounting screws periodically and tighten them if they have become loose. Do not overtighten.
- ກວດສອບການສວມໃສ່: Regularly inspect the handleset for any signs of wear or damage. Address any issues promptly to prevent further problems.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your handleset, refer to the following common solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Key does not turn smoothly or gets stuck. | Dirt in keyway, worn key, or misaligned cylinder. | Apply graphite lubricant to the keyway. Try a spare key. Check for proper cylinder alignment. |
| Latch does not retract or extend fully. | Misalignment, debris in latch mechanism, or loose screws. | Check door and frame alignment. Clean latch mechanism. Tighten mounting screws. |
| ມືຈັບຮູ້ສຶກວ່າວ່າງ. | screws mounts ວ່າງ. | ຂັນສະກູຕິດຕັ້ງທີ່ເຫັນໄດ້ທັງໝົດໃຫ້ແໜ້ນ. |
| Deadbolt does not engage the strike plate. | Door/frame misalignment, or strike plate not correctly positioned. | Adjust door hinges or strike plate position. Ensure the strike plate is securely fastened. |
If these solutions do not resolve the issue, contact customer support.
ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: ພື້ນຖານ Amazon
- ໝາຍເລກຕົວແບບ: ZIQ53910
- ສີ: Oil Bronze
- ສໍາເລັດຮູບພາຍນອກ: ທອງແດງ
- Product Dimensions (Handleset): 15.66ນິ້ວ (L) x 2.67ນິ້ວ (W)
- ຄວາມເຂົ້າກັນໄດ້ຄວາມໜາຂອງປະຕູ: 1-3/8 ຫາ 1-3/4 ນິ້ວ
- Backset Compatibility: 2-3/8 inches or 2-3/4 inches (adjustable)
- ປະເພດລັອກ: Single Cylinder Key Lock
- Security Rating: Certified Grade-3 by ANSI/BHMA
- ທິດທາງມື: Universal (reversible lever)
- ອົງປະກອບລວມ: Latch, strikes, screws pack
- ນ້ໍາຫນັກລາຍການ: 3.67 ປອນ (1.67 ກິໂລກຣາມ)
- UPC: 193598101119
ຂໍ້ມູນການຮັບປະກັນ
Specific warranty details for the Amazon Basics Front Door Lock Set are typically included with the product packaging or available on the official Amazon Basics webເວັບໄຊ. ກະລຸນາອ້າງອີງເຖິງຊັບພະຍາກອນເຫຼົ່ານີ້ສໍາລັບເງື່ອນໄຂການຮັບປະກັນທີ່ສົມບູນແບບ.
ການຊ່ວຍເຫຼືອລູກຄ້າ
ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ສະຫນັບສະຫນູນດ້ານວິຊາການ, ຫຼືສອບຖາມກ່ຽວກັບພາກສ່ວນການທົດແທນ, ກະລຸນາໄປຢ້ຽມຢາມເປັນທາງການ ຮ້ານ Amazon Basics ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງ Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.