Amazon Basics AB-DH504-SN

Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Model: AB-DH504-SN

ແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever. Please read all instructions carefully before beginning installation to ensure proper function and safety.

Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever

Image: The Amazon Basics AB-DH504-SN Satin Nickel Wave Closet Door Lever, showcasing its elegant design and satin nickel finish.

ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ຜະລິດຕະພັນນີ້ສາມາດເຮັດໃຫ້ທ່ານມີສານເຄມີລວມທັງສານຕະກົ່ວ, ເຊິ່ງເປັນທີ່ຮູ້ຈັກໃນລັດຄາລິຟໍເນຍທີ່ຈະເຮັດໃຫ້ເກີດມະເຮັງແລະຄວາມຜິດປົກກະຕິການເກີດລູກຫຼືເປັນອັນຕະລາຍຕໍ່ການຈະເລີນພັນອື່ນໆ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມໄປທີ່ www.P65 ຂໍ້ຄວນລະວັງ.

Always wear appropriate safety gear, such as gloves and eye protection, during installation. Keep small parts away from children.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

  • ການປະກອບຄັນຍົກພາຍນອກ
  • ການປະກອບຄັນຍົກພາຍໃນ
  • Adjustable Latch (2-3/8" - 2-3/4" backset)
  • Rounded Steel Faceplate
  • ແຜ່ນປະທ້ວງ
  • screws ການຕິດຕັ້ງ
  • ຄູ່ມືການສອນ
Components of the Amazon Basics AB-DH504-SN door lever

Image: All included components of the door lever set, including the lever assemblies, latch, faceplate, and strike plate.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

This door lever is designed to fit all doors 1-3/8" to 1-3/4" in thickness. The latch is adjustable for backsets of 2-3/8" or 2-3/4". Detailed installation instructions are included with your product. The following provides a general overview ຂອງ​ຂະ​ບວນ​ການ​ຕິດ​ຕັ້ງ​:

  1. ກະກຽມປະຕູ: Ensure your door has the standard bore holes for a door lever. If replacing an existing lever, remove the old hardware.
  2. Adjust the Latch: If necessary, adjust the latch backset to either 2-3/8" (60mm) or 2-3/4" (70mm) to match your door's specifications. Insert the latch into the door edge, ensuring the bevel faces the door frame. Secure with screws.
  3. Install Exterior Lever: Place the exterior lever assembly through the door bore hole, ensuring the spindle passes through the latch mechanism.
  4. Install Interior Lever: Align the interior lever assembly with the exterior assembly and secure it with the provided mounting screws. Ensure the levers are horizontal and operate smoothly.
  5. ຕິດຕັ້ງແຜ່ນ Strike Plate: Attach the strike plate to the door frame, aligning it with the latch bolt. Secure with screws.
  6. ການ​ປະ​ຕິ​ບັດ​ການ​ທົດ​ສອບ​: Close the door and test the lever operation from both sides to ensure the latch retracts and extends properly.
Installed Amazon Basics door lever on a white door

Image: The Amazon Basics door lever installed on a white interior door, demonstrating its appearance in a typical setting.

ຄໍາແນະນໍາການດໍາເນີນງານ

To open the door, simply push down on the lever handle. The latch bolt will retract, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.

ບໍາລຸງຮັກສາ

To maintain the finish and functionality of your door lever, follow these guidelines:

  • ທໍາຄວາມສະອາດ: ທຳຄວາມສະອາດຄັນຍົກດ້ວຍຜ້ານຸ້ມ, damp ຜ້າ. ຫຼີກລ່ຽງການໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ຕົວລະລາຍ, ຫຼື ສານເຄມີຮຸນແຮງ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍສີໄດ້.
  • ການລະບາຍສີ: If the lever mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch and spindle.
  • Tightening: Periodically check and tighten any loose mounting screws to ensure the lever remains securely attached to the door.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Lever is loose or wobbly.screws ການຕິດຕັ້ງແມ່ນວ່າງ.Tighten the mounting screws on the interior side of the lever.
ສະກູບໍ່ຫົດເຂົ້າຄືນໄດ້ໝົດ.Mechanism is dirty or dry; improper installation.Clean and lubricate the latch mechanism. Recheck installation steps to ensure proper alignment.
ປະຕູບໍ່ໄດ້ລັອກຢ່າງຖືກຕ້ອງ.Strike plate misalignment; latch bolt not extending fully.Adjust the strike plate on the door frame. Ensure the latch mechanism is clean and lubricated.

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ໝາຍເລກຕົວແບບAB-DH504-SN
ວັດສະດຸZinc Alloy (body), Steel (internal structure)
ຈົບSatin ນິກເກີນ
ຄວາມເຂົ້າກັນໄດ້ຄວາມຫນາຂອງປະຕູ1-3/8" to 1-3/4"
Latch Backset ປັບໄດ້2-3/8" (60mm) ຫຼື 2-3/4" (70mm)
ຂະໜາດສິນຄ້າ6.65"L x 4.29"ວ
ນ້ໍາຫນັກລາຍການ1.43 ປອນ
ແບບPassage (non-locking)
UPC841511121248
Hand holding door lever showing dimensions

Image: A hand holding the door lever, illustrating its approximate size and dimensions (2.6 inches / 6 cm in height).

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the Amazon Basics official website or contact Amazon customer service. Keep your purchase receipt for warranty claims.

© 2026 Amazon Basics. ສະຫງວນລິຂະສິດທຸກປະການ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.