TX 1.5T machine+horizontal Mold (110V/60HZ)
TX Automatic Wire Crimping Machine User Manual
Model: 1.5T machine+horizontal Mold (110V/60HZ)
ແນະນຳ
This manual provides essential information for the safe and efficient operation of your TX Automatic Wire Crimping Machine, Model 1.5T with horizontal mold. This high-speed, super mute terminal crimping machine is designed for high output and low maintenance, utilizing frequency conversion technology for electronic precision positioning. Please read this manual thoroughly before operating the machine.
ຂໍ້ຄວນລະວັງຄວາມປອດໄພ
- Always ensure the machine is properly grounded before operation.
- Wear appropriate personal protective equipment (PPE), including safety glasses, during operation.
- ຫ້າມໃຊ້ເຄື່ອງດ້ວຍມືປຽກ ຫຼື ໃນສະພາບທີ່ປຽກ.amp ເງື່ອນໄຂ.
- ຮັກສາມືແລະເຄື່ອງນຸ່ງທີ່ວ່າງໄວ້ຫ່າງຈາກພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາຫຼືການປັບ.
- ຮັບປະກັນວ່າພື້ນທີ່ເຮັດວຽກສະອາດ, ມີແສງສະຫວ່າງດີ ແລະ ບໍ່ມີສິ່ງກີດຂວາງ.
ສິນຄ້າເກີນview
The TX Automatic Wire Crimping Machine is a robust tool designed for precise and efficient crimping of various terminals. Its advanced features ensure stable voltage, high speed, and high accuracy in crimping operations.
ຮູບ 1: ດ້ານຫນ້າ view of the TX Automatic Wire Crimping Machine, showing the control panel and crimping mechanism.
ຮູບ 2: ຂ້າງ view of the machine, highlighting the motor and power connections.
ຕັ້ງຄ່າ
ການຫຸ້ມຫໍ່ແລະການກວດກາ
Carefully unpack the machine and all accessories. Inspect for any shipping damage. Report any damage to your supplier immediately.
ເນື້ອໃນຊຸດ:
- 1 x Automatic Wire Crimping Machine
- 1 x ຂາຕັ້ງ
- 1 x Horizontal Mold with Tools (pre-installed or separate)
- Accessories (power cord, etc.)
ສະພາແຫ່ງ
- ວາງເຄື່ອງຢູ່ເທິງພື້ນຜິວທີ່ມີລະດັບຄວາມຫມັ້ນຄົງ.
- Attach the support stand to the machine using the provided hardware. Ensure it is securely fastened.
- Verify that the horizontal mold is correctly installed. The machine is capable of fitting vertical, horizontal, and single grain molds. Ensure the correct mold type is in place for your application.
- Connect the power cord to the machine and then to a compatible power outlet (110V/60HZ for this model).
Figure 3: Illustration of various mold types compatible with the machine: vertical, horizontal, and single grain molds.
ຄໍາແນະນໍາການດໍາເນີນງານ
Powering On and Initial Checks
- ຮັບປະກັນຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພທັງໝົດຖືກປະຕິບັດຕາມ.
- ເປີດສະວິດໄຟຫຼັກ, ໂດຍປົກກະຕິແລ້ວຈະຕັ້ງຢູ່ເທິງແຜງຄວບຄຸມ.
- Observe the display for any error codes or indicators.
Adjusting the Mold and Crimping Force
The machine features convenient and swift adjustment for the mold. Refer to the control panel and any specific markings for fine-tuning the crimping force and position to match your terminal and wire specifications. The crimping force is rated at 1500KG.
ຮູບທີ 4: ລາຍລະອຽດ view of the crimping mechanism, showing the area where terminals and wires are inserted.
ຂະບວນການ Crimping
- Select the appropriate terminal and wire for your application.
- Insert the terminal into the mold.
- Carefully position the stripped wire into the terminal.
- Activate the crimping cycle using the foot pedal or control button. The machine will perform a high-speed, precise crimp.
- Remove the crimped terminal and inspect the quality of the crimp.
ຮູບທີ 5: ຕົວຢ່າງamples of different types of crimped terminals, demonstrating the machine's versatility.
This machine is suitable for crimping DC terminals, AC terminals, single terminals, and continuous terminals.
ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and optimal performance of your crimping machine. Always disconnect power before performing any maintenance.
ການດູແລປະຈໍາວັນ:
- Clean the crimping area and mold after each use to remove wire debris and dust.
- Wipe down the exterior of the machine with a clean, dry cloth.
Weekly/Monthly Maintenance:
- Inspect all moving parts for wear and tear.
- Apply a light lubricant to pivot points and sliding surfaces as recommended by the manufacturer (if applicable).
- Check all electrical connections for tightness and signs of damage.
- Ensure the support stand is stable and all fasteners are secure.
ຮູບທີ 6: View of the machine's base and lower mechanism, important for cleaning and lubrication.
ການແກ້ໄຂບັນຫາ
This section provides solutions to common issues you may encounter. For problems not listed here, please contact customer support.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງບໍ່ເປີດ. | No power supply; loose power cord; tripped circuit breaker. | Check power connection; ensure power outlet is functional; reset circuit breaker. |
| Poor crimp quality (loose or deformed). | Incorrect mold; improper crimping force setting; worn mold. | Verify mold type matches terminal; adjust crimping force; inspect and replace mold if worn. |
| ເຄື່ອງເຮັດໃຫ້ສຽງຜິດປົກກະຕິ. | Lack of lubrication; loose components; foreign object. | Lubricate moving parts; check and tighten fasteners; inspect for and remove any foreign objects. |
| Crimping cycle does not complete. | Obstruction in mechanism; sensor issue. | Clear any obstructions; contact support if sensor issue is suspected. |
ຂໍ້ມູນຈໍາເພາະ
| ພາລາມິເຕີ | ມູນຄ່າ |
|---|---|
| ຕົວແບບ | LY 1.5T |
| ເສັ້ນເລືອດຕັນໃນ | 30ມມ |
| ພະລັງງານ | 110V/60HZ (for this model) |
| ນ້ຳໜັກ | 49KG |
| ຂະໜາດ (L*W*H) | 270*240*650ມມ |
| ພະລັງງານມໍເຕີ | 0.55KW |
| Crimping Force | 1500KG |
| Terminals ທີ່ໃຊ້ໄດ້ | DC terminals, AC terminals, Single terminals, Continuous terminals |
| ວັດສະດຸ | ແຜ່ນເຫຼັກ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or to inquire about additional molds (vertical, horizontal, or single grain), please contact your original supplier or the manufacturer, TZ. Ensure you have your product model number (LY 1.5T) and purchase details available when seeking support.
The manufacturer is TZ. For specific inquiries regarding molds, please message your supplier directly as indicated in the product description.