VGEBY 2-inch Fuel Level Gauge and Sending Unit Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your VGEBY 2-inch Fuel Level Gauge and Sending Unit. Please read this manual thoroughly before installation and use to ensure proper function and safety. This product is designed for universal application in 12V 4/6/8 cylinder gasoline vehicles.

2. ຜະລິດຕະພັນເກີນview

The VGEBY Fuel Level Gauge system provides accurate, real-time monitoring of your vehicle's fuel level. It features a high-sensitivity gauge with an E-1/2-F range and a built-in night light for clear visibility in all conditions.

Figure 2.1: Complete set of VGEBY Fuel Level Gauge and Sending Unit components.

ອົງ​ປະ​ກອບ​ທີ່​ສໍາ​ຄັນ​:

• Fuel Level Gauge: A 2-inch (52mm) diameter gauge with an E-1/2-F display range and internal white LED illumination.
• Fuel Sending Unit: A float-type sensor designed to be installed in the fuel tank to measure fuel levels.
• Mounting Bracket and Gasket: Hardware for securing the gauge in place.
• ສາຍໄຟ: ສຳລັບການເຊື່ອມຕໍ່ໄຟຟ້າ.

3. ຂໍ້ມູນຈໍາເພາະ

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ສຳຄັນ: Professional installation is highly recommended for this product to ensure correct wiring and safe operation. Disconnect the vehicle's battery before beginning any electrical work.

4.1 Fuel Level Gauge Installation

1. ເລືອກສະຖານທີ່ຕິດຕັ້ງ: Select a suitable flat surface on your dashboard or instrument panel for the gauge. Ensure there is enough space behind the panel for wiring.
2. Cut Mounting Hole: Using a 52mm (2-inch) hole saw, carefully cut a circular hole in the chosen location.
3. Insert Gauge: Place the gauge into the cut-out hole.
4. Secure Gauge: Use the provided mounting bracket and nuts to secure the gauge from the rear of the panel. Tighten securely but do not overtighten.

Figure 4.1: Mounting bracket and gasket for securing the gauge.

4.2 Fuel Sending Unit Installation

The fuel sending unit must be installed in your vehicle's fuel tank. This typically involves removing the existing sending unit or modifying the tank for installation. Ensure the float arm has a full range of motion without obstruction.

Figure 4.2: Fuel sending unit with float arm.

4.3 ການເຊື່ອມຕໍ່ສາຍໄຟ

Refer to the wiring diagram below for proper connections. Incorrect wiring can damage the gauge or vehicle electrical system.

ຮູບ 4.3: ດ້ານຫລັງ view of the fuel gauge showing wiring terminals.

• ສາຍສີແດງ: Connect to 12V ignition switched power supply.
• ສາຍດຳ: ເຊື່ອມຕໍ່ກັບພື້ນທີ່ຕົວລົດ.
• Yellow Wire (or similar, from sender): Connect to the signal output from the fuel sending unit.

After all connections are made, reconnect the vehicle's battery and test the gauge operation.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed and wired correctly, the VGEBY Fuel Level Gauge operates automatically when the vehicle's ignition is on.

Figure 5.1: Fuel gauge face with E (Empty), 1/2 (Half), and F (Full) indicators.

• ການອ່ານເຄື່ອງວັດ: The needle will indicate the current fuel level between 'E' (Empty) and 'F' (Full). The '1/2' mark represents half a tank.
• ການສ່ອງແສງກາງຄືນ: The built-in white LED light will activate with your vehicle's dashboard lights, providing clear visibility during nighttime operation.
• ການຕິດຕາມເວລາຈິງ: The gauge provides continuous feedback on your fuel level, helping you avoid unexpected out-of-fuel situations.

6. ບໍາລຸງຮັກສາ

The VGEBY Fuel Level Gauge and Sending Unit are designed for durability and require minimal maintenance.

• ທໍາຄວາມສະອາດ: Wipe the gauge face with a soft, damp ຜ້າ. ຫຼີກລ່ຽງນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍທີ່ອາດຈະເຮັດໃຫ້ເລນ ຫຼື ເຮືອນເສຍຫາຍໄດ້.
• ກວດສອບການເຊື່ອມຕໍ່: Periodically inspect all wiring connections for tightness and corrosion. Ensure the ground connection is secure.
• Sending Unit: The fuel sending unit is designed to operate within the fuel tank and generally does not require external maintenance. If fuel contamination is suspected, the tank and sending unit may need inspection by a qualified technician.

7. ການແກ້ໄຂບັນຫາ

If you experience issues with your fuel level gauge, refer to the following common problems and solutions:

• Gauge Not Working (No Reading):
  • Check power supply to the gauge (red wire). Ensure it receives 12V when the ignition is on.
  • Verify the ground connection (black wire) is secure and free of corrosion.
  • Inspect the connection to the fuel sending unit (yellow wire).
  • Test the fuel sending unit for proper resistance range. A faulty sending unit will prevent accurate readings.
• ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ:
  • Ensure the fuel sending unit's float arm moves freely within the fuel tank and is not obstructed.
  • Verify the sending unit is correctly calibrated for your tank depth.
  • Check for stable power and ground connections to the gauge. Fluctuations can affect accuracy.
• Gauge Illumination Not Working:
  • Check the wiring for the illumination circuit (if separate from main power).
  • Ensure your vehicle's dashboard lights are functioning correctly.

If these steps do not resolve the issue, it is recommended to consult a qualified automotive electrician.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

VGEBY is committed to providing quality products. If you are not satisfied with your purchase, you may apply for an unconditional return and refund within 180 days of receipt.

For any product-related issues or technical assistance, please contact our customer support team via email. We aim to respond promptly to all inquiries.

ຂໍ້ມູນຕິດຕໍ່: Please refer to your purchase documentation or the VGEBY official store page for specific contact details.