Elitech ILD-200

Elitech ILD-200 Infrared Refrigerant Leak Detector

ຄູ່ມືຜູ້ໃຊ້

1. ບົດແນະນຳ

The Elitech ILD-200 is an advanced infrared refrigerant leak detector designed for precise and efficient detection of various halogenated refrigerants. Featuring a state-of-the-art infrared sensor, it offers high sensitivity, fast response times, and strong anti-interference capabilities, minimizing false alarms. This manual provides essential information for the safe and effective use of your ILD-200 detector.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄໍາເຕືອນ: ອ່ານຄໍາເຕືອນຄວາມປອດໄພທັງຫມົດແລະຄໍາແນະນໍາກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນນີ້. ການບໍ່ປະຕິບັດຕາມຄຳເຕືອນ ແລະຄຳແນະນຳອາດສົ່ງຜົນໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້, ແລະ/ຫຼື ບາດເຈັບສາຫັດ.

  • ປະຕິບັດອຸປະກອນຢູ່ໃນພື້ນທີ່ລະບາຍອາກາດໄດ້ດີ.
  • Do not expose the device to extreme temperatures, humidity, or corrosive environments.
  • Keep the device away from open flames or ignition sources.
  • ຢ່າພະຍາຍາມສ້ອມແປງ ຫຼືແກ້ໄຂອຸປະກອນດ້ວຍຕົນເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
  • Ensure the probe tip is clean and free from obstructions before and after use.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

  • 1 x Elitech ILD-200 Infrared Refrigerant Leak Detector
  • 1 x ກະເປົາຖື
  • 1 x ສາຍສາກ
  • 1 x Packet of Filters
  • 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
Elitech ILD-200 package contents including leak detector, carrying case, charging cable, filters, and manual.
Figure 3.1: Elitech ILD-200 Package Contents

The package includes the ILD-200 leak detector, a durable carrying case for protection and transport, a charging cable for the internal battery, and a set of replacement filters to ensure optimal performance. The user manual provides detailed instructions for operation and maintenance.

4. ຜະລິດຕະພັນເກີນview

The Elitech ILD-200 features an advanced infrared sensor for superior leak detection. Its ergonomic design and intuitive interface make it easy to use in various environments.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

  • ເຕັກໂນໂລຊີເຊັນເຊີອິນຟາເລດ: Provides strong anti-interference, faster response, and longer service life compared to heated diode detectors.
  • ຄວາມອ່ອນໄຫວສູງ: Adjustable sensitivity levels (High/Medium/Low) with a maximum sensitivity of 0.14 oz/yr, meeting SAE-2791 & SAE-2913 standards.
  • Broad Refrigerant Detection: Capable of detecting all halogenated refrigerants including CFCs, HFCs, HCFCs, HCs, HFOs, and blends such as R11, R22, R404a, R410a, R600a, R1234yf, AZ-50, HP62, and MP39.
  • 2.8" Large Screen Display: Clear peak display for easy identification of leak detection points, even in challenging conditions.
  • Pump Suction: Ensures instant response and accurate sampລິງ.
Elitech ILD-200 with a 2.8 inch large screen displaying sensitivity and peak readings.
Figure 4.1: Elitech ILD-200 Large Screen Display

The large screen provides clear visual feedback on sensitivity and detected leak levels, aiding in precise leak pinpointing.

Diagram showing the internal advanced infrared sensor of the Elitech ILD-200.
Figure 4.2: Advanced Infrared Sensor Technology

The advanced infrared sensor is designed for high precision and durability, minimizing false alarms and ensuring a long operational lifespan.

5. ຕັ້ງຄ່າ

  1. ການຫຸ້ມຫໍ່: Carefully remove the ILD-200 and all accessories from the carrying case.
  2. ກຳລັງສາກແບັດເຕີຣີ: Connect the charging cable to the device and a suitable USB power adapter. Allow the device to fully charge before first use. The battery indicator on the screen will show charging status.
  3. ເປີດ: Press and hold the 'ON/OFF' button until the screen illuminates. The device will undergo a warm-up sequence.
  4. ການ​ສອບ​ທຽບ​ເບື້ອງ​ຕົ້ນ​: The device performs automatic calibration during warm-up. Ensure it is in a clean, refrigerant-free environment during this process.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

The ILD-200 offers intuitive operation for efficient leak detection.

6.1 ການ​ດໍາ​ເນີນ​ງານ​ພື້ນ​ຖານ​:

  1. ອຸ່ນເຄື່ອງ: After powering on, wait for the device to complete its warm-up cycle (approximately 30 seconds).
  2. ປັບຄວາມອ່ອນໄຫວ: Press the 'SENS' button to cycle through High (H), Medium (M), and Low (L) sensitivity settings. Start with High sensitivity for general scanning and reduce it to pinpoint leaks.
  3. ສະແກນຫາຮອຍຮົ່ວ: Slowly move the probe tip (approximately 1 inch per second) along the suspected leak area, keeping it close to the surface.
  4. Leak Indication: When a leak is detected, the device will emit an audible alarm and the visual display will show increased refrigerant concentration.
  5. Pinpointing Leaks: Once a general leak area is identified, reduce the sensitivity and move the probe slowly in a crisscross pattern to pinpoint the exact leak source.
  6. Peak Function: Press the 'PEAK' button to mark the maximum leakage value detected, aiding in identifying the largest leak point in complex environments.
  7. ຟັງຊັນປິດສຽງ: In noisy environments, press the 'MUTE' button to silence the audible alarm. Headphones can be connected for clearer audio feedback.
Elitech ILD-200 in use, detecting a leak on an outdoor HVAC unit.
Figure 6.1: Using the ILD-200 for Leak Detection

The flexible probe allows access to hard-to-reach areas, making leak detection comprehensive.

6.2 Supported Refrigerants:

The ILD-200 detects a wide range of halogenated refrigerants:

  • HFCs: R134a, R410a, R407C, R417A, R404A, R507, R23, R508A, R508B, R152a, R32, etc.
  • HCFCs: R22, R123, R124, R141b, R142b, R402A, R402B, R408A, R409A, etc.
  • CFCs: R11, R12, R13, R502, R503, etc.
  • PFCs: PFC-14, PFC-116, PFC-218, etc.
  • HFOs: R-1234YF
List of various halogenated refrigerants detected by Elitech ILD-200.
Figure 6.2: Detected Refrigerant Types

6.3 Instructional Video:

Watch this video for a detailed guide on how to use the ILD-200 refrigerant infrared leak detector:

Video 6.3: How to use ILD-200 refrigerant infrared leak detector

This video demonstrates the step-by-step process of operating the ILD-200, including power-on, sensitivity adjustment, and leak detection techniques.

7. ບໍາລຸງຮັກສາ

  1. ການທົດແທນການກັ່ນຕອງ: Regularly check and replace the probe tip filter to prevent contamination and ensure accurate readings. Spare filters are included in the package.
  2. Probe Cleaning: Keep the probe tip clean and free from dust, oil, and moisture. Use a soft, dry cloth for cleaning.
  3. ການດູແລເຊັນເຊີ: The infrared sensor has a long lifespan (up to 10 years). Avoid exposing it to harsh chemicals or physical damage.
  4. ການດູແລຫມໍ້ໄຟ: Recharge the lithium-ion battery regularly. Store the device in a cool, dry place when not in use for extended periods.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your ILD-200, perform the following checks:

  1. False Alarms or No Detection:
    • ກວດສອບສະພາບແວດລ້ອມ: In high concentration environments, adjust sensitivity to Medium (M) or Low (L) levels.
    • Inspect Gas Path: Verify the probe is not blocked, the air pump is functioning, and there are no pipeline leaks within the device. Replace the filter if dirty.
    • Review ການດໍາເນີນງານ: Ensure you are moving the probe at the correct speed and distance. Moving too fast or too far from the leak source can lead to missed detections or false alarms.
    • Core Component Failure: If the above steps do not resolve the issue, there might be a sensor damage or optical chamber deformation. The sensor may need replacement.
  2. ອຸປະກອນບໍ່ເປີດ: ກວດສອບລະດັບການສາກແບັດເຕີຣີ. ສາກໄຟຄືນໃໝ່ຖ້າຈຳເປັນ.
  3. ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ: Ensure the probe filter is clean and the device has completed its warm-up and calibration in a clean air environment.

8.1 Troubleshooting Video:

For common issues like false alarms or detection problems, refer to this quick self-check guide:

Video 8.1: Quick Self-Check for False Alarms or Detection Issues

This video provides practical steps to diagnose and resolve common operational problems with your leak detector.

9. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ຕົວແບບILD-200
ຫຼັກການກວດຫາເຊັນເຊີອິນຟາເລດ
ຄວາມອ່ອນໄຫວສູງສຸດ0.14 oz/yr
ເວລາຕອບສະຫນອງທັນທີ
ຊີວິດເຊັນເຊີ10 ປີ
ແບັດເຕີຣີ1 ຫມໍ້ໄຟ Lithium Metal ຕ້ອງການ
ປະເພດປຸກຟັງໄດ້, ເຫັນໄດ້
ຄວາມຊຸ່ມຊື່ນປະຕິບັດການສູງເຖິງ 85%
ອຸນຫະພູມປະຕິບັດການNot specified, but upper rating 20 Degrees Celsius (likely range is wider)
ຂະໜາດສິນຄ້າ1.5"D x 3.39"W x 7.91"H
ນ້ໍາຫນັກລາຍການ240 ກຣາມ (8.5 ອອນສ໌)
ວັດສະດຸພາດສະຕິກ
ໄດ້ມາດຕະຖານSAE-2791 & SAE-2913
Elitech ILD-200 showing probe length, weight, and key specifications.
Figure 9.1: ILD-200 Dimensions and Key Specifications

10. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

Elitech provides 24/7 customer service and technical support for its products. For any issues or inquiries, please contact Elitech customer service.

ລາຍ​ລະ​ອຽດ​ການ​ຮັບ​ປະ​ກັນ​ສະ​ເພາະ​ໂດຍ​ປົກ​ກະ​ຕິ​ແມ່ນ​ໄດ້​ສະ​ຫນອງ​ໃຫ້​ກັບ​ການ​ຫຸ້ມ​ຫໍ່​ຜະ​ລິດ​ຕະ​ພັນ​ຫຼື​ຢ່າງ​ເປັນ​ທາງ​ການ​ຂອງ​ຜູ້​ຜະ​ລິດ webເວັບໄຊທ໌. ກະລຸນາອ້າງອີງເຖິງຊັບພະຍາກອນເຫຼົ່ານີ້ສຳລັບຂໍ້ມູນການຮັບປະກັນທີ່ຄົບຖ້ວນ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.