Einhell TC-TC 800 Tile Cutter Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• ຄວາມສາມາດໃນການຕັດ: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• ກອງ​ຄວາມ​ປອດ​ໄພ​: A protective guard for the cutting disc ensures user safety from chips and dust.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

ອ່ານ ແລະເຂົ້າໃຈທຸກຄຳເຕືອນຄວາມປອດໄພ, ຄຳແນະນຳ, ຮູບປະກອບ, ແລະຂໍ້ມູນສະເພາະທີ່ສະໜອງໃຫ້ກັບເຄື່ອງມືພະລັງງານນີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ແລະ / ຫຼືການບາດເຈັບທີ່ຮ້າຍແຮງ.

ຄຳເຕືອນຄວາມປອດໄພທົ່ວໄປ:

• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE) ລວມທັງແວ່ນຕານິລະໄພ, ການປ້ອງກັນການໄດ້ຍິນ, ແລະຖົງມື.
• ໃຫ້ແນ່ໃຈວ່າພື້ນທີ່ເຮັດວຽກແມ່ນສະອາດ, ມີແສງສະຫວ່າງດີ, ແລະບໍ່ມີສິ່ງກີດຂວາງ.
• ຮັກສາເດັກນ້ອຍ ແລະຜູ້ຢືນຢູ່ຫ່າງໆ ໃນຂະນະທີ່ໃຊ້ເຄື່ອງມື.
• Never operate the tool if the power cord or plug is damaged.
• Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• ໃຊ້ແຜ່ນໃບທີ່ຖືກຕ້ອງສໍາລັບວັດສະດຸທີ່ຖືກຕັດ.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. ອົງປະກອບຫຼາຍກວ່າview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• ຫນ່ວຍບໍລິການມໍເຕີ
• ອ່າງເກັບນ້ໍາ
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• Blade Guard
• ປຸ່ມເປີດ/ປິດ
• ມືຈັບ

ຮູບ 1: ເກີນview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. ຕັ້ງຄ່າ

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 ການຫຸ້ມຫໍ່ແລະການກວດກາ

1. ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. ໃຫ້ແນ່ໃຈວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນລາຍຊື່.

4.2 ການຕື່ມນ້ຳໃສ່ອ່າງເກັບນ້ຳ

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Regularly check the water level during operation and refill as needed.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Follow these steps for safe and effective tile cutting.

5.1 ການເປີດ/ປິດ

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. To turn on, press the green 'ON' button.
3. To turn off, press the red 'OFF' button.

Figure 4: Power switch for turning the machine on and off.

5.2 ການເຮັດການຕັດ

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

5.3 ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ: ວິທີການນໍາໃຊ້

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and performance of your tile cutter.

6.1 ການເຮັດຄວາມສະອາດອ່າງເກັບນ້ຳ

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. ຕັດການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານ.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. ປະກອບສ່ວນປະກອບຄືນ ໃໝ່.

6.2 ການປ່ຽນແຜ່ນໃບ

Replace the diamond cutting disc when it becomes dull or damaged.

1. ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ຖອດປລັກເຄື່ອງມືແລ້ວ.
2. Use the provided tool to loosen the blade retaining nut.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. ຂັນນັອດຍຶດໃຫ້ແໜ້ນ.

7. ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your tile cutter.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

9.1 ຂໍ້ມູນການຮັບປະກັນ

This Einhell product comes with a ຮັບປະກັນ 2 ປີຈໍາກັດກະລຸນາເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ສຳລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

9.2 ສະຫນັບສະຫນູນລູກຄ້າ

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webເວັບໄຊທ໌ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານສໍາລັບຂໍ້ມູນຕິດຕໍ່ທີ່ທັນສະໄຫມທີ່ສຸດ.