1. ບົດແນະນຳ
Thank you for choosing the V-TAC LED Floodlight VT-20-W. This manual provides essential information for the safe installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: V-TAC LED Floodlight VT-20-W (Front View)
This image shows the V-TAC LED Floodlight VT-20-W from the front, highlighting its compact design and LED array.
2. ຂໍ້ມູນຄວາມປອດໄພ
ຄຳເຕືອນ: ສະເຫມີຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືບໍາລຸງຮັກສາ.
- ການຕິດຕັ້ງຄວນໄດ້ຮັບການປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ.
- ຮັບປະກັນການສະຫນອງພະລັງງານ voltage matches the product's requirements (AC 220-240V, 50Hz).
- Do not operate the floodlight if the housing or cable is damaged.
- This product is designed for outdoor use (IP65 rated). Ensure all connections are waterproof.
- ຢ່າແນມເບິ່ງແຫຼ່ງໄຟ LED ໂດຍກົງເມື່ອມີແສງ.
- ຮັກສາໄວ້ຫ່າງຈາກວັດສະດຸທີ່ຕິດໄຟໄດ້.
- ຮັບປະກັນການໃສ່ພື້ນດິນທີ່ເຫມາະສົມ.
3. ເນື້ອໃນຊຸດ
ຊຸດປະກອບມີລາຍການຕໍ່ໄປນີ້:
- 1 x V-TAC LED Floodlight VT-20-W
- ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

Image 3.1: Product Packaging
This image displays the retail packaging for the V-TAC LED Floodlight, indicating key features like 20W power, 100° beaming angle, 1600lm brightness, and 30,000H long life.
4. ຜະລິດຕະພັນເກີນview ແລະຄຸນສົມບັດ
The V-TAC LED Floodlight VT-20-W is a high-performance outdoor lighting solution.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ພະລັງງານ: 20 ວັດ
- ອຸນຫະພູມສີ: 6400K (ສີຂາວເຢັນ)
- ຟລັກແສງ: 1600 Lumens
- Beaming Angle: 100°
- ວັດສະດຸຮ່າງກາຍ: ອະລູມິນຽມ Die-cast
- ການຈັດອັນດັບການປົກປ້ອງຂາເຂົ້າ (IP): IP65 (ກັນນ້ໍາແລະຝຸ່ນ)
- ປະສິດທິພາບພະລັງງານ: Up to 85% energy saving compared to traditional lighting.
- ອາຍຸຍືນ: ປະມານ 30,000 ຊົ່ວໂມງ.
- Efficient Heat Sink: Designed to prevent overheating and prolong lamp ອາຍຸຍືນ.
- SMD LEDs: Utilizes Surface Mounted Device (SMD) LEDs for efficient illumination.
ຂະໜາດ:
The floodlight has compact dimensions suitable for various outdoor installations.
- ຄວາມຍາວ: 15.3 ຊຕມ
- ກວ້າງ: 13.2 ຊຕມ
- ຄວາມເລິກ: 2.7 ຊຕມ
- ນ້ຳໜັກ: 400 g

ຮູບພາບທີ 4.1: ຂະໜາດຜະລິດຕະພັນ
This image illustrates the physical dimensions of the V-TAC LED Floodlight, showing a length of 153 mm, a height of 132 mm, and a depth of 27 mm.

Image 4.2: IP65 Rating
This image highlights the IP65 rating of the floodlight, indicating its resistance to water and dust, making it suitable for outdoor use.

Image 4.3: Efficient Heat Sink
This image displays the rear of the floodlight, emphasizing the efficient heat sink design which helps prevent overheating and extends the product's lifespan.
5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This floodlight is designed for outdoor use and can be mounted as a freestanding unit. Professional installation by a qualified electrician is highly recommended to ensure safety and compliance with local electrical codes.
ຂັ້ນຕອນການຕິດຕັ້ງ:
- ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Before starting any installation, ensure the main power supply to the installation area is switched off at the circuit breaker.
- ສະຖານທີ່ຕິດຕັ້ງ: Choose a suitable outdoor location that provides the desired illumination coverage and allows for secure mounting. The floodlight comes with a bracket for surface mounting.
- ການຕິດຕັ້ງທີ່ປອດໄພ: Use appropriate screws and anchors (not included) to securely fasten the mounting bracket to the desired surface. Ensure the surface can support the weight of the floodlight.
- ການເຊື່ອມຕໍ່ສາຍ:
- Connect the brown wire (L) to the Live terminal.
- Connect the blue wire (N) to the Neutral terminal.
- Connect the yellow/green wire (E) to the Earth/Ground terminal.
- ປັບມຸມ: Once mounted and wired, adjust the floodlight's angle to direct the light as required.
- ການຟື້ນຟູພະລັງງານ: Restore power to the circuit and test the floodlight.

Image 5.1: Wiring Connections
This image displays the rear of the floodlight, showing the electrical cable with brown (Live), blue (Neutral), and yellow/green (Earth) wires for connection.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
The V-TAC LED Floodlight VT-20-W operates by direct connection to your electrical mains.
- Ensure the floodlight is correctly installed and wired according to the "Setup and Installation" section.
- Switch on the power supply to the floodlight circuit. The floodlight will illuminate instantly.
- To turn off the floodlight, switch off the power supply to its circuit.
For automated operation (e.g., dusk-to-dawn or motion sensing), an external sensor or timer switch must be installed by a qualified electrician.

Image 6.1: Floodlight in Outdoor Application
This image shows multiple V-TAC LED Floodlights illuminating the exterior of a building at night, demonstrating their effectiveness in outdoor lighting.
7. ບໍາລຸງຮັກສາ
The V-TAC LED Floodlight VT-20-W requires minimal maintenance.
- ທໍາຄວາມສະອາດ: Ensure the floodlight is switched off and cool before cleaning. Wipe the exterior with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການກວດກາ: Periodically inspect the floodlight and its wiring for any signs of damage, wear, or loose connections. Address any issues promptly.
- ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: There are no user-serviceable parts inside the floodlight. Do not attempt to open or repair the unit.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your V-TAC LED Floodlight, refer to the following troubleshooting guide:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Floodlight ບໍ່ເປີດ. |
|
|
| ຜົນຜະລິດຂອງແສງມືດມົວ ຫຼື ກະພິບ. |
|
|
If the problem persists after attempting these solutions, contact V-TAC customer support or a qualified electrician.
9. ຂໍ້ມູນຈໍາເພາະ
| ພາລາມິເຕີ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | VT-20-W |
| ພະລັງງານ | 20 ວັດ |
| ການປ້ອນຂໍ້ມູນ Voltage | AC 220-240V, 50Hz |
| ແສງສະຫວ່າງ Flux | 1600 Lumens |
| ອຸນຫະພູມສີ | 6400K (ສີຂາວເຢັນ) |
| ສີຮ່າງກາຍ | ສີຂາວ |
| ວັດສະດຸ | ອະລູມິນຽມ Die-cast |
| ຂະໜາດຜະລິດຕະພັນ (ຍ x ກວ້າງ x ເລິກ) | 15.3 x 13.2 x 2.7 cm |
| ນ້ຳໜັກ | 400 g |
| ການຈັດອັນດັບ IP | IP65 |
| ການນໍາໃຊ້ສະເພາະ | ການນໍາໃຊ້ກາງແຈ້ງ |
| ປະເພດການຕິດຕັ້ງ | Freestanding (with mounting bracket) |
| ຫ້ອງຮຽນປະສິດທິພາບພະລັງງານ | F |
| ການໃຊ້ພະລັງງານ (1000 ຊົ່ວໂມງ) | 20 kWh |
| CRI (ດັດຊະນີການສະແດງສີ) | 80 |

Image 9.1: EU Energy Label
This image shows the EU energy label for the V-TAC LED Floodlight, indicating an energy efficiency class of F and an energy consumption of 20 kWh per 1000 hours. More details can be found at eprel.ec.europa.eu/qr/966766.
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
V-TAC products are manufactured to high standards and are designed for durability. While specific warranty details are not provided in this manual, V-TAC typically offers a warranty period for its products. Please refer to your purchase documentation or the official V-TAC webເວັບໄຊທ for ສໍາລັບຂໍ້ມູນການຮັບປະກັນລະອຽດ.
For technical support, troubleshooting assistance, or warranty claims, please contact your local V-TAC distributor or visit the official V-TAC webເວັບໄຊ.
ຜູ້ຜະລິດ: V-TAC Europe Ltd.
ທີ່ຢູ່: bul. Rozhen 41, Sofia, Bulgaria