PWR+ AC Adapter Instruction Manual for Booster PAC Jump Starters

1. ບົດແນະນຳ

This manual provides instructions for the safe and effective use of the PWR+ AC Adapter, model PWR-TAH19012N. This adapter is designed to provide power and charge compatible Booster PAC and CarStart jump starter models.

Image 1: The PWR+ AC Adapter with its integrated power cord.

2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Read all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• UL ລາຍຊື່: This PWR+ AC Adapter is Tested, Approved, and Certified by UL/ULC (Underwriters Laboratories). The unique E475124 number is verifiable on the UL website, ensuring compliance with safety standards.
• ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ: Use this adapter in dry, indoor environments only. Do not expose to rain or moisture.
• ການລະບາຍອາກາດທີ່ເຫມາະສົມ: Ensure adequate ventilation around the adapter during use. Do not cover the adapter or place it in an enclosed space.
• ຫຼີກເວັ້ນການເສຍຫາຍ: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter.
• ການປົກປ້ອງໃນຕົວ: The adapter features Short Circuit Protection (SCP), Over Current Protection (OCP), Over Voltage Protection (OVP), and Over Temperature Protection (OTP) for enhanced safety.

Image 2: UL certification logo and a visual comparison highlighting the safety certification of the PWR+ adapter.

3. ເນື້ອໃນຊຸດ

ຊຸດດັ່ງກ່າວມີລາຍການຕໍ່ໄປນີ້:

• 1 x PWR+ AC Adapter (Model: PWR-TAH19012N)

Image 3: The PWR+ AC Adapter shown with its packaging.

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

1. ກວດ​ສອບ​ອະ​ແດບ​ເຕີ​: Before first use, visually inspect the AC adapter and its cord for any signs of damage. Do not use if damaged.
2. ເຊື່ອມຕໍ່ຫາອຸປະກອນ: Locate the charging port on your compatible Booster PAC or CarStart jump starter. Insert the barrel connector of the PWR+ AC Adapter firmly into the device's charging port.
3. ເຊື່ອມຕໍ່ຫາປລັກສຽບໄຟ: Plug the AC adapter's two-prong plug into a standard 110-240V wall outlet. Ensure the outlet is easily accessible.

The adapter features an extra-long 6.7 ft cord for flexible placement.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once connected, the PWR+ AC Adapter will begin charging your Booster PAC or CarStart jump starter. The charging indicator on your jump starter will typically illuminate or change state to indicate charging status. Refer to your jump starter's manual for specific charging indicators.

• ເວລາສາກໄຟ: Charging time varies depending on the jump starter model and its current battery level.
• ຕັດການເຊື່ອມຕໍ່: Once your device is fully charged, disconnect the adapter from the wall outlet first, then from your jump starter.
• ການເຊື່ອມຕໍ່ຢ່າງຕໍ່ເນື່ອງ: While the adapter has built-in safety features, it is generally recommended to disconnect the charger once the device is fully charged to prolong battery life.

6. ຄວາມເຂົ້າກັນໄດ້

This PWR+ AC Adapter is compatible with a wide range of Booster PAC and CarStart jump starter models, including but not limited to:

• Booster PAC ES6000, ES5000, ES5000C, ES2500, ES2500C, ES2500KE, ES1224
• Booster PAC J850, J900, J1000, J2000 Truck Pac Charger
• Booster PAC P/N: ESA214, ESA217, ESA218, ESA22, 141-003-000, 141-004-000, 141-337-000, DC1500500, GPU48180500WDOO, GPU481801000WD00
• CarStart CS1000, CS1200 Power Battery Booster
• Solar ES6000, ES6000KE, ES5000SOL, ES5000ESP5500, TCB-ESA217, ESA22, ES2500KE, ES2500SOL, ES2500KE, ESA217, ES5000ESP5500, J900-SOL, ESA-22, J850 Truck Pac Battery Booster Jump Starter

ຮູບພາບ 4: ຕົວຢ່າງample of a compatible device, the Booster PAC ES2500 jump starter.

7. ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ 5: ລາຍລະອຽດ view of the adapter's internal cable structure and built-in safety protections.

8. ການແກ້ໄຂບັນຫາ

• ອຸປະກອນບໍ່ໄດ້ສາກໄຟ:
  • Ensure the adapter is securely plugged into both the jump starter and the wall outlet.
  • ກວດ​ສອບ​ວ່າ​ເຕົ້າ​ສຽບ​ຝາ​ເຮັດ​ວຽກ​ໄດ້​ໂດຍ​ການ​ສຽບ​ອຸ​ປະ​ກອນ​ອື່ນ​.
  • Check if your jump starter model is listed in the compatibility section.
  • Inspect the adapter cord and connector for any visible damage.
• ອະແດັບເຕີຄວາມຮ້ອນເກີນ:
  • ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີຢູ່ໃນພື້ນທີ່ທີ່ມີລະບາຍອາກາດດີ ແລະ ບໍ່ມີຝາປິດ.
  • ຖ້າອາການຮ້ອນເກີນໄປຍັງຄົງຢູ່, ໃຫ້ຢຸດໃຊ້ ແລະ ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

9. ການດູແລແລະບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Disconnect the adapter from power before cleaning. Use a dry, soft cloth to wipe the adapter. Do not use liquid cleaners.
• ການເກັບຮັກສາ: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter to prevent damage.
• ການຈັດການ: ຫຼີກເວັ້ນການຫຼຸດລົງອະແດບເຕີຫຼືເຮັດໃຫ້ມັນມີຜົນກະທົບທີ່ເຂັ້ມແຂງ.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This PWR+ AC Adapter comes with a ນະໂຍບາຍການຄືນເງິນ 30 ມື້ ແລະ ກ 24-month exchange warranty. PWR+ is a company based in Washington, USA, committed to customer satisfaction.

For warranty claims, technical support, or any inquiries, please contact PWR+ customer service through the retailer where the product was purchased or visit the official PWR+ webເວັບໄຊ.