ຫນຶ່ງສໍາລັບທັງຫມົດ SV1770

One For All SV1770 Bluetooth Audio Transmitter User Manual

Model: SV1770 | Brand: One For All

ແນະນຳ

The One For All SV1770 Bluetooth Audio Transmitter provides a wireless solution for transmitting audio from your television or other audio sources to Bluetooth-enabled headphones. This device allows for private listening without disturbing others and supports simultaneous connection for up to two pairs of headphones. It incorporates aptX technology for enhanced sound quality and is conveniently powered via USB.

ເນື້ອໃນຊຸດ

ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດມີຢູ່ໃນຊຸດ:

  • One For All SV1770 Bluetooth Audio Transmitter unit
  • ສາຍສຽງສະເຕີຣິໂອ 3.5 ມມ
  • RCA audio cable (red/white)
  • ສາຍໄຟ USB
One For All SV1770 Bluetooth Audio Transmitter and included accessories

Image: The One For All SV1770 Bluetooth Audio Transmitter shown with its included accessories, which are a 3.5mm audio cable, an RCA audio cable, and a USB power cable.

ຕັ້ງຄ່າ

Connecting the Transmitter to Your TV/Audio Source

The SV1770 can be connected to your TV or audio source using either the 3.5mm audio output or the RCA audio outputs.

  1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the USB power cable from the transmitter to a free USB port on your TV or a USB power adapter (not included). The transmitter requires 5V USB power.
  2. ການເຊື່ອມຕໍ່ສຽງ (3.5mm): If your TV or audio source has a 3.5mm headphone jack, connect one end of the 3.5mm stereo audio cable to the transmitter's 3.5mm input and the other end to the TV's headphone jack.
  3. Audio Connection (RCA): If your TV or audio source has RCA audio output ports (typically red and white), connect the RCA audio cable to these ports and the other end to the transmitter's RCA input.
One For All SV1770 Bluetooth Audio Transmitter connected to a TV

Image: The SV1770 Bluetooth Audio Transmitter is shown connected to the rear of a television, utilizing both RCA audio cables for sound input and a USB port for power.

ການຈັບຄູ່ກັບຫູຟັງ Bluetooth

Follow these steps to pair your Bluetooth headphones with the SV1770 transmitter:

  1. Ensure the SV1770 transmitter is powered on. The LED indicator will show its status.
  2. Put your Bluetooth headphones into pairing mode. Refer to your headphone's instruction manual for specific instructions.
  3. Press and hold the pairing button on the SV1770 transmitter for approximately 3 seconds until the LED indicator flashes rapidly, indicating it is in pairing mode.
  4. Place the headphones close to the transmitter. The devices should automatically connect. Once connected, the LED indicator on the transmitter will change to a steady blue light.
  5. To connect a second pair of headphones, repeat steps 2-4. The transmitter can support up to two pairs of headphones simultaneously.

ຄໍາແນະນໍາການດໍາເນີນງານ

ການຖ່າຍທອດສຽງ

Once successfully paired, audio from your connected TV or audio source will be transmitted wirelessly to your Bluetooth headphones.

ການຄວບຄຸມປະລິມານ

Volume control is typically managed directly on your Bluetooth headphones. The transmitter does not have independent volume controls.

ກຳລັງເຊື່ອມຕໍ່ຄືນໃໝ່

After initial pairing, the transmitter and headphones should automatically reconnect when both devices are powered on and within range. If they do not reconnect, briefly press the pairing button on the transmitter to initiate reconnection.

ບໍາລຸງຮັກສາ

  • Keep the transmitter clean by wiping it with a soft, dry cloth.
  • Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
  • ຢ່າພະຍາຍາມເປີດ ຫຼື ສ້ອມແປງອຸປະກອນດ້ວຍຕົວທ່ານເອງ, ເພາະວ່າການເຮັດແບບນີ້ຈະເຮັດໃຫ້ການຮັບປະກັນເປັນໂມຄະ.

ການແກ້ໄຂບັນຫາ

ບັນຫາການແກ້ໄຂ
ບໍ່ມີສຽງຈາກຫູຟັງ.
  • Ensure the transmitter is powered on and the LED indicator is solid blue.
  • Verify that the headphones are paired and connected to the transmitter.
  • Check the audio cable connection between the transmitter and the TV/audio source.
  • Confirm the TV's audio output is active and not muted.
  • Increase the volume on your headphones.
ບໍ່ສາມາດຈັບຄູ່ຫູຟັງໄດ້.
  • Ensure both the transmitter and headphones are in pairing mode (flashing LED).
  • ຍ້າຍຫູຟັງໃຫ້ໃກ້ກັບເຄື່ອງສົ່ງສັນຍານຫຼາຍຂຶ້ນ.
  • ປິດອຸປະກອນ Bluetooth ອື່ນໆທີ່ຢູ່ໃກ້ຄຽງເພື່ອຫຼີກເວັ້ນການລົບກວນ.
  • Try resetting both the transmitter and headphones (refer to their respective manuals).
Poor audio quality or dropouts.
  • Ensure the transmitter and headphones are within the 10-meter range.
  • ຫຼຸດຜ່ອນອຸປະສັກ (ຝາ, ວັດຖຸຂະໜາດໃຫຍ່) ລະຫວ່າງອຸປະກອນຕ່າງໆ.
  • Check for sources of interference (Wi-Fi routers, microwaves).
  • Verify the audio source quality.

ຂໍ້ມູນຈໍາເພາະ

  • ຕົວແບບ: SV1770
  • ລຸ້ນ Bluetooth: 3.0
  • ຕົວແປງສັນຍານ Bluetooth: aptX, SBC
  • ຊ່ວງໄຮ້ສາຍ: ສູງເຖິງ 10 ແມັດ (33 ຟຸດ)
  • ປະເພດສຽງອອກ: Bluetooth
  • ໂModeດອອກສຽງ: ສະເຕຣິໂອ
  • ຄຸນນະສົມບັດສຽງ: Wolfson D/A converter, up to 24 bit 192 kHz
  • ການໂຕ້ຕອບຮາດແວ: Bluetooth 3.0, USB 3.0 (for power)
  • ອຸປະກອນທີ່ເຂົ້າກັນໄດ້: TV, stereo, any audio device with 3.5mm or RCA audio output
  • ແຫຼ່ງພະລັງງານ: USB (5V)
  • ຂະໜາດຜະລິດຕະພັນ: 17 x 4 x 1.6 cm
  • ນ້ຳໜັກ: 31 g
  • ວັດສະດຸ: ໂພລີຄາບອນ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສໍາລັບຂໍ້ມູນການຮັບປະກັນ ແລະການຊ່ວຍເຫຼືອດ້ານວິຊາການ, ກະລຸນາອ້າງອີງເຖິງ One For All ຢ່າງເປັນທາງການ webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ສະຫນັບສະຫນູນອອນໄລນ໌: ຢ້ຽມຢາມ www.oneforall.com for FAQs, product registration, and contact details.

ບໍລິການລູກຄ້າ: ອ້າງອີງເຖິງຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ ຫຼືຢູ່ໃນທາງການ webສະຖານທີ່ສຳລັບການສະໜັບສະໜູນໃນພາກພື້ນ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.