BMC RESmart GII Auto CPAP E-20A-H with Humidifier User Manual

1. ບົດແນະນຳ

This manual provides essential information for the safe and effective operation, setup, and maintenance of your BMC RESmart GII Auto CPAP System E-20A-H with Humidifier. Please read this manual thoroughly before using the device and retain it for future reference. This device is intended for the treatment of Obstructive Sleep Apnea (OSA).

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນຄວາມປອດໄພທີ່ສຳຄັນ:

• Always disconnect the device from the power supply before cleaning or performing any maintenance.
• ຫ້າມ​ນຳ​ອຸ​ປະ​ກອນ​ຈຸ່ມ​ໃສ່​ນ້ຳ​ຫຼື​ຂອງ​ແຫຼວ​ອື່ນໆ.
• Use only accessories and parts recommended by BMC.
• Keep the device away from direct sunlight, heat sources, and sharp objects.
• Consult your physician or healthcare provider if you experience any unusual symptoms or discomfort during use.
• ອຸປະກອນນີ້ບໍ່ໄດ້ມີຈຸດປະສົງສໍາລັບການຊ່ວຍຊີວິດ.

3. ຜະລິດຕະພັນເກີນview

The BMC RESmart GII Auto CPAP System E-20A-H is an intelligent device designed for the treatment of Obstructive Sleep Apnea. It features an integrated humidifier for enhanced comfort.

ອົງ​ປະ​ກອບ​ທີ່​ສໍາ​ຄັນ​:

• ຫົວໜ່ວຍຫຼັກ: Houses the motor, control electronics, and display.
• ເຄື່ອງປັບຄວາມຊຸ່ມ: Integrated unit with dual water chambers for efficient humidification.
• ຈໍ LCD ຂະໜາດ 3.5 ນິ້ວ: Provides real-time information and access to settings.
• ຕູດຄວບຄຸມ: ສໍາລັບການນໍາທາງເມນູແລະການຕັ້ງຄ່າປັບ.
• ຊ່ອງສຽບອາກາດ: Connects to the CPAP tubing.
• Inlet ພະລັງງານ: ສໍາລັບການເຊື່ອມຕໍ່ອະແດບເຕີພະລັງງານ.
• ຊ່ອງໃສ່ບັດ SD: For compliance data storage and retrieval (iCode II).
• SpO2 Kit Port (Optional): For real-time blood oxygen saturation and pulse rate monitoring.

An image showing the BMC RESmart GII Auto CPAP device, featuring its main unit, control knob, and integrated humidifier. The device is black with a clear humidifier chamber visible.

4. ຕັ້ງຄ່າ

4.1 ການຫຸ້ມຫໍ່

1. ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Inspect the device and accessories for any signs of damage. Do not use if damaged.

4.2 ການເຊື່ອມຕໍ່ພະລັງງານ

1. Connect the power adapter to the power inlet on the back of the device.
2. ສຽບສາຍໄຟເຂົ້າໄປໃນບ່ອນສຽບໄຟຟ້າທີ່ເຫມາະສົມ.

4.3 Filling the Humidifier

1. Open the humidifier chamber by sliding or lifting the cover.
2. Fill the water chamber with distilled water up to the maximum fill line. Do not overfill.
3. Close the humidifier chamber securely.

4.4 Connecting Tubing and Mask

1. Connect one end of the CPAP tubing to the air outlet on the device.
2. Connect the other end of the tubing to your prescribed CPAP mask.
3. Fit the mask comfortably and securely according to its own instructions.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 Starting Therapy

1. Ensure the device is properly set up and connected.
2. ໃສ່ໜ້າກາກຂອງເຈົ້າ.
3. Press the Start/Stop button (usually the control knob) to begin therapy. The device will automatically start delivering air.

5.2 ການປັບການຕັ້ງຄ່າ

Use the control knob to navigate the menu on the 3.5-inch LCD display. Press the knob to select an option and rotate to adjust values.

• ຊ່ວງຄວາມກົດດັນ: 4-20 cm H2O (Auto CPAP adjusts automatically within this range).
• Ramp ເວລາ: Adjusts the time (0-60 minutes) for the pressure to gradually increase to the prescribed level.
• ລະດັບຄວາມຊຸ່ມຊື່ນ: Select from Off or levels 1-5 to control the humidity output.
• Reslex: Pressure relief feature (Off/1/2/3) for exhalation comfort.
• ເປີດ/ປິດອັດຕະໂນມັດ: Can be enabled or disabled (Off by default).

5.3 Stopping Therapy

Press the Start/Stop button again to end therapy. The device will power down.

5.4 iCode II Data Retrieval

Compliance data is encoded by a QR code displayed on the device's screen. Use a compatible application to scan the QR code for quick data retrieval and monitoring.

6. ບໍາລຸງຮັກສາ

Regular cleaning and maintenance are crucial for the optimal performance and longevity of your device.

6.1 ການທໍາຄວາມສະອາດປະຈໍາວັນ

• Humidifier Water Chamber: Empty any remaining water and rinse with distilled water. Allow to air dry.
• ໜ້າກາກ: Wipe down the mask cushion with a damp cloth or specialized CPAP wipes.

6.2 ການທໍາຄວາມສະອາດປະຈໍາອາທິດ

• Humidifier Water Chamber: Wash with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
• ທໍ່ CPAP: Wash with mild soap and warm water. Rinse thoroughly and hang to air dry.
• ການກັ່ນຕອງອາກາດ: Inspect the reusable air filter (if applicable). If dirty, rinse under running water and allow to air dry. Replace disposable filters as recommended.

6.3 ການເບິ່ງແຍງທົ່ວໄປ

• ເຊັດດ້ານນອກຂອງອຸປະກອນດ້ວຍການໂຄສະນາamp cloth. Do not use abrasive cleaners or immerse the device.
• Replace air filters regularly as per manufacturer recommendations or if visibly dirty.

7. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​, ເບິ່ງ​ບັນ​ຫາ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແລະ​ການ​ແກ້​ໄຂ​:

If the problem persists, contact your healthcare provider or the manufacturer's customer support.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, service, or questions regarding your BMC RESmart GII Auto CPAP System, please contact the seller or the manufacturer directly.