iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

ແບບ ຈຳ ລອງ: 43234-1976

ແນະນຳ

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

ຄຸນສົມບັດຜະລິດຕະພັນ

  • ປະເພດຕົວເຊື່ອມຕໍ່: 2.4G receiver antenna with IPEX 4 Generation connector.
  • ຄວາມຍາວ: 5.9 inches (150mm) total length.
  • ວັດສະດຸ: RF113 Silver plated Wire Material for enhanced signal transmission.
  • ປະສິດທິພາບ: Precision machining ensures low loss signal stability and high sensitivity.
  • ຄວາມເຂົ້າກັນໄດ້: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

ເນື້ອໃນຊຸດ

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

  1. ລະບຸປະເພດຕົວເຊື່ອມຕໍ່: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. ເຊື່ອມຕໍ່ກັບຕົວຮັບ: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. ການວາງເສົາອາກາດ: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. Secure Antenna: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

ຄໍາແນະນໍາການດໍາເນີນງານ

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

ບໍາລຸງຮັກສາ

  • ການກວດກາປົກກະຕິ: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • ຄວາມສະອາດ: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • ການເກັບຮັກສາ: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • ການທົດແທນ: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

ການແກ້ໄຂບັນຫາ

Problem: Poor Signal / Frequent Failsafes
  • ກວດສອບການເຊື່ອມຕໍ່: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • ການວາງເສົາອາກາດ: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • Antenna Damage: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • Receiver Issues: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Verify Connector Type: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

ຂໍ້ມູນຈໍາເພາະ

ພາລາມິເຕີ ມູນຄ່າ
ໝາຍເລກຕົວແບບ 43234-1976
ປະເພດເສົາອາກາດ 2.4G Receiver Antenna
ປະເພດຕົວເຊື່ອມຕໍ່ IPEX 4 Generation
ຄວາມຍາວ 150 ມມ (5.9 ນິ້ວ)
ວັດສະດຸສາຍ RF113 Silver plated
impedance 50 ໂອມ
ຊ່ວງຄວາມຖີ່ 2400 - 2500 MHz
SWR <= 2.0
ໄດ້ຮັບ 2
ອຸນຫະພູມການດໍາເນີນງານ -40 °C ຫາ +65 °C
ອຸນຫະພູມການເກັບຮັກສາ -40 °C ຫາ +80 °C
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official iFlight webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ເງື່ອນໄຂການຮັບປະກັນສະເພາະອາດຈະແຕກຕ່າງກັນໄປຕາມພາກພື້ນ ແລະຮ້ານຂາຍຍ່ອຍ.

© 2026 iFlight. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.