ແນະນຳ
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-5087 PIR Infrared Motion Sensor. Please read this manual carefully before installation and retain it for future reference. This sensor is designed for ceiling mounting and automatically controls lighting based on detected motion.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- PIR (Passive Infrared) Motion Detection
- 360-degree Detection Angle
- Ceiling Mount Design
- Adjustable LUX (Ambient Light) Sensitivity
- Adjustable TIME Delay
- Maximum Load: 1000W (LED) / 2000W (Traditional Lighting)
ຮູບທີ 1: V-TAC VT-5087 PIR Infrared Motion Sensor. This image highlights the sensor's capabilities, including a maximum load of 1000W for LED lighting, automatic on/off based on motion, and a 'SUN' setting for daylight operation (only works when natural light is 3 lux or less). Detection motion speed is 0.6-1.5m/s.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ: Installation must be performed by a qualified electrician and in accordance with all local electrical codes. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electric shock.
ສະຖານທີ່ຕິດຕັ້ງ
- Choose a ceiling location where the sensor can cover the desired detection area without obstruction.
- Avoid mounting near heat sources (e.g., air vents, heaters) or direct sunlight, as these can cause false triggers.
- Ensure the mounting surface is stable and can support the sensor.
ຄໍາແນະນໍາສາຍໄຟ
- ປິດແຫຼ່ງຈ່າຍໄຟຫຼັກຢູ່ທີ່ເບຣກເກີ.
- ເອົາອອກຢ່າງລະມັດລະວັງ casing of the sensor to access the wiring terminals.
- Connect the live (L), neutral (N), and load (L') wires according to the diagram provided on the sensor or in the packaging. Typically:
- L: Live input from power supply
- N: Neutral input from power supply and neutral to load
- ລ: Switched live output to the light fixture (load)
- Securely fasten the sensor to the ceiling using the provided screws and anchors.
- ປ່ຽນ c ດ້ານນອກasing.
- Restore power and test the sensor.
ຮູບທີ 2: ຫລັງ view of the sensor, illustrating the wiring terminals (L, N, L') and the LUX and TIME adjustment knobs. Mounting screws and wall anchors are also shown.
ຄໍາແນະນໍາການດໍາເນີນງານ
The V-TAC VT-5087 sensor features two adjustable controls: LUX and TIME. These allow you to customize the sensor's behavior to suit your environment and preferences.
ປຸ່ມປັບ
- LUX Control: This knob adjusts the ambient light threshold at which the sensor will activate.
- ຫັນໜ້າໄປທາງ ຕາເວັນ symbol for activation in both daylight and darkness (e.g., >2000 LUX).
- ຫັນໜ້າໄປທາງ ວົງເດືອນ symbol for activation only in low light conditions (e.g., <3 LUX).
- TIME Control: This knob sets the duration the light remains on after motion is detected and then stops.
- Adjust from minimum (approx. 10 seconds) to maximum (approx. 15 minutes).
- The timer resets if motion is detected again before the set time expires.
ຮູບທີ 3: ລະອຽດ view of the easy-access control knobs for LUX adjustment and TIME adjustment. This image also indicates the rated load for LED lighting (up to 1000W) and traditional lighting (up to 2000W).
Detection Range and Angle
The sensor offers a 360-degree detection angle, making it suitable for central ceiling placement. The maximum detection distance is approximately 6 meters (up to 8 meters at <24°C). The detection motion speed is 0.6-1.5 m/s.
ຮູບທີ 4: Diagram showing the impressive detection features, including a 360-degree detection range, adjustable light intensity range (<3 to 2000 LUX), and a detection distance of 8 meters (up to 24°C). The time delay is adjustable from 10 seconds to 15 minutes.
ບໍາລຸງຮັກສາ
The V-TAC VT-5087 PIR sensor requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- ທໍາຄວາມສະອາດ: Gently wipe the sensor lens and housing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- ອຸປະສັກ: Periodically check that there are no new obstructions (e.g., furniture, decorations) blocking the sensor's field of view.
- ພະລັງງານ: Always disconnect power before performing any cleaning or inspection to prevent electric shock.
ການແກ້ໄຂບັນຫາ
If you experience issues with your V-TAC VT-5087 PIR sensor, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແສງບໍ່ເປີດເມື່ອກວດພົບການເຄື່ອນໄຫວ. |
|
|
| ໄຟຈະເປີດຢູ່ຕະຫຼອດເວລາ ຫຼື ເປີດແບບສຸ່ມ. |
|
|
| ໄລຍະການກວດຫາສັ້ນເກີນໄປ ຫຼື ບໍ່ສອດຄ່ອງ. |
|
|
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | VT-5087 |
| ຍີ່ຫໍ້ | V-TAC |
| ສີ | ດຳ |
| ແຫຼ່ງພະລັງງານ | ໄຟຟ້າສາຍ |
| ຄວາມຖີ່ | 60 Hz |
| ປະເພດການຕິດຕັ້ງ | ເພດານ Mount |
| ໄລຍະການກວດຫາສູງສຸດ | 6 Meters (up to 8 meters at <24°C) |
| ມຸມກວດຫາ | 360 ອົງສາ |
| ການປັບເວລາຊັກຊ້າ | Min. 10s ± 3s / Max. 15min ± 2min |
| Light Intensity Range (LUX) | <3 ຫາ 2000 LUX (ປັບໄດ້) |
| ກວດຈັບຄວາມໄວການເຄື່ອນໄຫວ | 0.6-1.5 m/s |
| Rated Load (LED) | ສູງສຸດ 1000W |
| Rated Load (Traditional Lighting) | ສູງສຸດ 2000W |
| ອຸນຫະພູມປະຕິບັດການ | 15 Degrees Celsius (Note: This seems like a minimum or specific test temperature, not a range.) |
| ການຈັດອັນດັບ IP | IP20 |
ຂໍ້ມູນການຮັບປະກັນ
This V-TAC VT-5087 PIR Infrared Motion Sensor comes with a ຮັບປະກັນ 2 ປີ from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
ຮູບທີ 5: Product packaging for the V-TAC Infrared Motion Sensor, clearly indicating a 2-year warranty and other features like 360-degree detection, 6m distance, and IP20 rating.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For further assistance, technical support, or warranty inquiries, please contact V-TAC customer service. Refer to the V-TAC official webເວັບໄຊທ໌ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານສໍາລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.
V-TAC Webເວັບໄຊ: www.v-tac.eu