WilTec Automatic 8-Egg Incubator Instruction Manual

ແນະນຳ

This manual provides detailed instructions for the safe and efficient operation of your WilTec Automatic 8-Egg Incubator. Designed for small-scale incubation, this unit features precise electronic temperature control and an automatic egg-turning mechanism to ensure optimal hatching conditions. Please read this manual thoroughly before first use to achieve successful incubation results.

The incubator is suitable for various poultry eggs, such as chicken, quail, and duck eggs, as well as reptile eggs. Always verify egg size and required incubation temperatures for specific species.

Image: The WilTec Automatic 8-Egg Incubator, fully assembled and ready for use. It features a clear top cover and a compact design.

ຄໍາແນະນໍາຄວາມປອດໄພ

• Always place the incubator on a stable, level surface away from direct sunlight, drafts, and extreme temperature fluctuations.
• ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ voltage requirements specified on the device.
• Do not immerse the incubator or its electrical components in water or any other liquid.
• ເກັບຮັກສາຕູ້ຟັກໄຂ່ໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະ ສັດລ້ຽງ.
• ຖອດປລັກເຄື່ອງອອກຈາກປລັກສຽບໄຟກ່ອນທີ່ຈະທໍາຄວາມສະອາດຫຼືດໍາເນີນການບໍາລຸງຮັກສາໃດໆ.
• Do not operate the incubator if the power cord or plug is damaged. Contact customer support for assistance.
• Use the polystyrene transport protection as additional thermal insulation during operation, if desired.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ແລະ​ບໍ່​ໄດ້​ຮັບ​ຄວາມ​ເສຍ​ຫາຍ​ໃນ​ເວ​ລາ​ທີ່​ການ​ປົດ​ຫຸ້ມ​ຫໍ່​:

• WilTec Automatic 8-Egg Incubator unit
• ສາຍໄຟ
• Polystyrene protective packaging (can be used for insulation)
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

Image: The incubator's main components, including the base with the egg turning mechanism, the transparent cover, and the power cord.

Image: The incubator housed within its protective polystyrene packaging, which can also serve as additional insulation.

ຕັ້ງຄ່າ

1. Unpack the Incubator: Carefully remove all components from the packaging. Retain the polystyrene packaging for potential use as additional insulation.
2. ການຈັດວາງ: Position the incubator on a flat, stable surface in a room with a consistent ambient temperature, away from direct sunlight, drafts, and heat sources.
3. Fill Water Reservoir: Locate the water reservoir at the bottom of the incubator. Fill it with distilled or demineralized water to the appropriate level. This helps regulate humidity. Avoid overfilling.
4. ເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cable into the incubator and then into a suitable electrical outlet. The display should illuminate.
5. ການທຳຄວາມຮ້ອນລ່ວງໜ້າ: ປ່ອຍໃຫ້ຕູ້ຟັກໄຂ່ເຮັດວຽກຢ່າງໜ້ອຍ 2-3 ຊົ່ວໂມງກ່ອນທີ່ຈະເອົາໄຂ່ໃສ່ພາຍໃນ. ວິທີນີ້ຈະຊ່ວຍຮັກສາອຸນຫະພູມພາຍໃນ ແລະ ຄວາມຊຸ່ມຊື່ນໃຫ້ຄົງທີ່.

ຄໍາແນະນໍາການດໍາເນີນງານ

ແຜງຄວບຄຸມຜ່ານview

Image: The digital control panel displaying temperature and humidity, along with 'Set', '+', and '-' buttons and LED indicators for 'Work' and 'Set'.

The incubator features a dual display for temperature and humidity, along with LED indicators and control buttons.

• ຈໍສະແດງອຸນຫະພູມ: Shows the current internal temperature in Celsius.
• ການສະແດງຄວາມຊຸ່ມຊື່ນ: Shows the current internal humidity percentage.
• "Work" LED: ເຮັດໃຫ້ມີແສງເມື່ອອົງປະກອບຄວາມຮ້ອນເຮັດວຽກ.
• "Set" LED: Illuminates when in temperature setting mode.
• ປຸ່ມ: "Set" button to enter setting mode, "+" and "-" buttons to adjust values.

ການຕັ້ງຄ່າອຸນຫະພູມ

1. Press the "Set" button once. The "Set" LED will light up, and the temperature display will flash.
2. Use the "+" and "-" buttons to adjust the desired incubation temperature (range: 25°C to 39.5°C). Refer to species-specific incubation charts for optimal temperatures.
3. Press the "Set" button again to confirm the setting and exit setting mode. The display will stop flashing.

Automatic Egg Turning

The incubator is equipped with an automatic egg-turning mechanism that simulates natural turning by a hen. This prevents the embryo from sticking to the eggshell, which is crucial for successful hatching.

• The egg turning system operates automatically at regular intervals.
• ສຳຄັນ: Approximately 3-4 days before the expected hatch date, the automatic turning system must be switched off. This allows the chicks to position themselves correctly for hatching. Consult an incubation calendar for specific timing.

Humidity Regulation

Humidity is regulated by the water in the reservoir at the bottom of the unit. Periodically check the water level and refill as needed with distilled or demineralized water. The humidity display provides a real-time reading.

Placing Eggs

Once the incubator has reached the desired stable temperature and humidity, carefully place the eggs into the designated slots in the turning mechanism. Ensure eggs are clean and fertile.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: After each incubation cycle, unplug the incubator and allow it to cool. Clean all internal surfaces with a mild disinfectant solution and a soft cloth. Ensure all parts are completely dry before storage or next use.
• ອ່າງເກັບນ້ຳ: Regularly clean the water reservoir to prevent algae or bacterial growth.
• ການເກັບຮັກສາ: Store the incubator in a clean, dry place, preferably in its original packaging, when not in use.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

• ໝາຍເລກຕົວແບບ: 51269
• ຄວາມອາດສາມາດ: ສູງສຸດ 8 ໄຂ່ (ຂຶ້ນກັບຂະໜາດ)
• ຊ່ວງອຸນຫະພູມ: 25°C to 39.5°C (adjustable)
• ການຄວບຄຸມອຸນຫະພູມ: ອັດຕະໂນມັດ
• ການຫັນໄຂ່: ອັດຕະໂນມັດ
• ການຄວບຄຸມຄວາມຊຸ່ມຊື່ນ: Manual (via water reservoir)
• ຈໍສະແດງຜົນ: Dual LED for Temperature and Humidity
• ພັດລົມ: Integrated for air circulation
• ຂະໜາດ (L x W x H): ຂະໜາດປະມານ 32 x 32 x 30 cm
• ນ້ຳໜັກ: ປະມານ 1.5 ກິໂລ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ, ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ຫຼື ຊິ້ນສ່ວນອາໄຫຼ່, ກະລຸນາຕິດຕໍ່ບໍລິການລູກຄ້າຂອງ WilTec. ເກັບໃບຮັບເງິນຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

You can find contact information on the official WilTec webເວັບໄຊທ໌ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍຂອງທ່ານ.

WilTec Webເວັບໄຊ: www.wiltec.de (ຕ. ຢample link, actual link might vary by region)