Universal Office Chair Assembly Manual

1. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ກະລຸນາອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະປະກອບແລະນໍາໃຊ້. ຮັກສາຄູ່ມືນີ້ໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.

• ໃຫ້ແນ່ໃຈວ່າທຸກຊິ້ນສ່ວນມີຢູ່ ແລະ ບໍ່ເສຍຫາຍກ່ອນທີ່ຈະເລີ່ມປະກອບ. ຢ່າໃຊ້ຖ້າມີຊິ້ນສ່ວນໃດຂາດຫາຍໄປ ຫຼື ເສຍຫາຍ.
• Assemble the chair on a soft, clean surface to prevent scratching.
• Do not overtighten screws during assembly, as this may damage the components.
• ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງຢູ່ຫ່າງຈາກພື້ນທີ່ປະກອບ. ຊິ້ນສ່ວນຂະຫນາດນ້ອຍສາມາດເປັນອັນຕະລາຍຕໍ່ການຫາຍໃຈ.
• Only use the chair for its intended purpose.
• ຢ່າຢືນຢູ່ເທິງເກົ້າອີ້.

2. ເນື້ອໃນຊຸດ

Verify that all components listed below are included in your package.

3. ຄໍາແນະນໍາຂອງສະພາແຫ່ງ

Follow these steps carefully to assemble your office chair.

1. ຕິດລໍ້ໃສ່ຖານດາວ: Insert each caster (F) into the holes at the end of each leg of the star base (E). Push firmly until they click into place.
2. ໃສ່ Gas Lift: Place the gas lift cylinder (D) into the center hole of the assembled star base (E). Ensure it sits securely.
3. ຕິດແຜ່ນກົນໄກໃສ່ບ່ອນນັ່ງ: Align the mechanism plate (G) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism plate faces the front of the seat. Secure with four M8x25mm screws (I) using the Allen wrench (J).
4. ຕິດທີ່ວາງແຂນໃສ່ບ່ອນນັ່ງ: Attach the armrests (C) to the underside of the seat cushion (B) using four M6x20mm screws (H), two per armrest. Do not fully tighten yet.
5. Attach Chair Back to Armrests: Align the chair back (A) with the remaining holes on the armrests (C). Secure with the remaining four M6x20mm screws (H), two per armrest. Now, fully tighten all armrest screws.
6. ເຊື່ອມຕໍ່ບ່ອນນັ່ງກັບຍົກອາຍແກັສ: Carefully place the assembled seat and back onto the gas lift cylinder (D) protruding from the star base. Press down firmly to secure.

Your office chair is now assembled.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Familiarize yourself with the chair's adjustment features for optimal comfort.

• ການປັບຄວາມສູງ: ເພື່ອຍົກບ່ອນນັ່ງ, ຍົກ lever ທີ່ຢູ່ໃຕ້ເບື້ອງຂວາຂອງບ່ອນນັ່ງໃນຂະນະທີ່ເອົານ້ໍາຫນັກຂອງທ່ານອອກຈາກເກົ້າອີ້. ເພື່ອຫຼຸດບ່ອນນັ່ງ, ໃຫ້ຍົກ lever ໃນຂະນະທີ່ນັ່ງ. ປ່ອຍ lever ໃນລະດັບຄວາມສູງທີ່ຕ້ອງການ.
• ລັອກ/ປົດລັອກການອຽງ: Pull the same lever outwards to unlock the tilt function, allowing the chair back to recline. Push the lever inwards to lock the chair back in an upright position.
• Tilt Tension: Rotate the round knob located under the front-center of the seat to adjust the tension of the tilt mechanism. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• Armrest Adjustment (if applicable): Some models feature adjustable armrests. Look for buttons or levers on the armrests to adjust their height or pivot.

5. ບໍາລຸງຮັກສາ

Regular maintenance will prolong the life of your office chair.

• ທໍາຄວາມສະອາດ: ເຊັດພື້ນຜິວໃຫ້ອ່ອນໆ, ງamp cloth. For fabric upholstery, use a mild fabric cleaner. Avoid harsh chemicals or abrasive cleaners.
• ກວດ​ສອບ​ການ​ຕິດ​ຕັ້ງ​: ກວດເບິ່ງທຸກສະກູແລະສະກູເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນ. ຮັດແໜ້ນ ຖ້າຈຳເປັນ.
• Caster Cleaning: Remove any hair or debris that may accumulate around the casters to ensure smooth movement.
• ການລະບາຍສີ: The gas lift cylinder is maintenance-free. Do not attempt to lubricate it.

6. ການແກ້ໄຂບັນຫາ

ເບິ່ງພາກນີ້ເພື່ອແກ້ໄຂບັນຫາທົ່ວໄປ.

7. ຂໍ້ມູນຈໍາເພາະ

Key technical details of your office chair.