cozze 90379, 90340, 90363

Cozze Pizza Starter Kit Instruction Manual

Models: 90379 (Pizza Peel), 90340 (Infrared Thermometer), 90363 (Pizza Cutter)

ແນະນຳ

Thank you for choosing the Cozze Pizza Starter Kit. This kit provides essential tools for an optimal pizza-making experience at home. It includes a pizza peel, an infrared thermometer, and a pizza cutter. Please read this manual carefully before first use to ensure proper operation and maintenance of your tools.

Cozze Pizza Starter Kit packaging showing the pizza peel, infrared thermometer, and pizza cutter inside a gift box.

Image: The Cozze Pizza Starter Kit, presented in its packaging.

ການຕິດຕັ້ງແລະການນໍາໃຊ້ເບື້ອງຕົ້ນ

1. Pizza Peel (Model 90379)

  • ການຫຸ້ມຫໍ່: Carefully remove the pizza peel from its packaging.
  • ທໍາຄວາມສະອາດເບື້ອງຕົ້ນ: Wash the aluminum blade and stainless steel handle with warm, soapy water before first use. Rinse thoroughly and dry completely.
Cozze Pizza Peel with a perforated aluminum blade and a black handle.

Image: The Cozze Pizza Peel, featuring its perforated design.

2. Infrared Thermometer (Model 90340)

  • ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: The thermometer requires 2 x 1.5V AAA batteries (not included). Open the battery compartment, insert the batteries according to the polarity markings, and close the compartment securely.
  • ເປີດ: Press the trigger to power on the device.

3. Pizza Cutter (Model 90363)

  • ການຫຸ້ມຫໍ່: Remove the pizza cutter from its packaging.
  • ທໍາຄວາມສະອາດເບື້ອງຕົ້ນ: Wash the stainless steel wheel and handle with warm, soapy water before first use. Rinse thoroughly and dry completely.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. Using the Pizza Peel

  1. Lightly dust the pizza peel with flour or semolina. This helps prevent the pizza dough from sticking.
  2. Carefully slide the prepared pizza onto the dusted peel.
  3. With a swift, confident motion, slide the pizza from the peel onto the hot pizza stone or oven surface.
  4. To retrieve the cooked pizza, slide the peel underneath the pizza and lift it out of the oven.
A person using a Cozze pizza peel to remove a freshly baked pizza from an outdoor pizza oven.

Image: Demonstrating the use of the pizza peel with an outdoor pizza oven.

2. Using the Infrared Thermometer

  1. Point the thermometer's laser at the center of your pizza stone or cooking surface.
  2. Press and hold the trigger. The temperature will be displayed instantly on the digital screen.
  3. For optimal pizza baking, aim for a stone temperature between 750°F and 900°F (approximately 400°C to 480°C). The thermometer can measure up to 1000°F (550°C).
  4. You can switch between Celsius and Fahrenheit readings using the designated button on the device.

3. Using the Pizza Cutter

  1. Place the cooked pizza on a stable cutting surface.
  2. Hold the pizza cutter firmly by the handle.
  3. Apply downward pressure and roll the sharp wheel across the pizza to create clean slices.

ການດູແລແລະບໍາລຸງຮັກສາ

Pizza Peel

  • Hand wash with warm, soapy water after each use.
  • Avoid abrasive cleaners or scrubbers that could damage the aluminum surface.
  • Dry thoroughly before storing to prevent water spots or corrosion.

ເຄື່ອງວັດອຸນຫະພູມອິນຟາເລດ

  • ເຊັດພາຍນອກດ້ວຍຜ້າອ່ອນ, ງamp ຜ້າ. ຢ່າ immerse ໃນນ້ໍາ.
  • ເກັບຮັກສາໄວ້ໃນບ່ອນແຫ້ງແລ້ງ, ຫ່າງຈາກອຸນຫະພູມສູງສຸດ.
  • ຖອດແບດເຕີຣີອອກຖ້າອຸປະກອນຈະບໍ່ຖືກໃຊ້ເປັນໄລຍະເວລາເພີ່ມເຕີມເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.

ເຄື່ອງຕັດພິຊຊ່າ

  • The stainless steel cutting wheel is dishwasher safe. For best results and to maintain sharpness, hand washing is recommended.
  • Dry immediately after washing to prevent water spots.

ການແກ້ໄຂບັນຫາ

Infrared Thermometer Issues

  • No display/Power issues: Check if batteries are correctly installed and have sufficient charge. Replace with new AAA batteries if necessary.
  • ການອ່ານບໍ່ຖືກຕ້ອງ: Ensure the lens is clean and free from obstructions. Point directly at the target surface.

Pizza Peel Issues

  • Pizza sticking to peel: Ensure the peel is adequately dusted with flour or semolina. Work quickly when transferring the pizza.

Pizza Cutter Issues

  • Cutter not slicing cleanly: Ensure the blade is clean of any dried food residue. Apply firm, even pressure when cutting.

ຂໍ້ມູນຈໍາເພາະ

Back of the Cozze Pizza Starter Kit packaging, showing product specifications and features.

Image: Product specifications as displayed on the kit packaging.

ອົງປະກອບລາຍລະອຽດຂໍ້ມູນຈໍາເພາະ
Pizza Peel (Model 90379)ຄວາມຍາວທັງໝົດ60 ຊຕມ
Shovel Dimensions28 x 28 ຊມ
ຂະໜາດການຈັດການ17 x 3.2 ຊມ
ຄວາມໜາຂອງແຜ່ນ1.25 ມມ
ນ້ຳໜັກ0.580 ກິ​ໂລ
ວັດສະດຸແຜ່ນໃບອາລູມີນຽມ
ການຈັດການວັດສະດຸສະແຕນເລດແລະພາດສະຕິກ
Infrared Thermometer (Model 90340)ໄລຍະການວັດແທກສູງສຸດ 530°C (1000°F)
ການວັດແທກຄວາມຖືກຕ້ອງ+/-1.5%
ຈໍສະແດງຜົນDigital, Celsius and Fahrenheit
ຕ້ອງໃຊ້ແບັດເຕີຣີ2 x 1.5V AAA (ບໍ່ລວມ)
Pizza Cutter (Model 90363)ຂະໜາດ (ເສັ້ນຜ່າສູນກາງ)110 ມມ
Cutting Wheel Material1.5 mm thick Steel
ການຈັດການວັດສະດຸStainless Steel with Black PP handle and leather strap
ເຄື່ອງລ້າງຈານປອດໄພYes (for cutting wheel)
General Kit InformationOverall Item Weight0.8 ກິ​ໂລກ​ຣາມ
ຜູ້ຜະລິດMillarco International A/S

ຂໍ້ມູນການຮັບປະກັນ

For specific warranty details regarding your Cozze Pizza Starter Kit, please refer to the documentation included with your purchase or visit the official Cozze webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you have any questions, require assistance, or need to report an issue with your Cozze Pizza Starter Kit, please contact Cozze customer support through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ກັບການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.