ແນະນຳ
ຂອບໃຈສໍາລັບການຊື້asing the Capello Self-Setting Atomic Clock with Calendar & Indoor Temperature. This clock is designed to provide accurate timekeeping, date display, and indoor temperature readings, all within a sleek, contemporary design. Its self-setting atomic feature ensures precise time synchronization.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Self-Setting Atomic Time: Automatically synchronizes with the WWVB radio signal for precise time.
- ຈໍດິຈິຕອນ: Bright and easy-to-read digital readout.
- ຟັງຊັນປະຕິທິນ: Displays month, date, and day of the week.
- ອຸນຫະພູມໃນອາຄານ: Provides current indoor temperature in Fahrenheit or Celsius.
- ໂມງປຸກຄູ່: Two independent alarm settings for versatile use.
- ການອອກແບບ Sleek: Durable polyurethane frame with a black plastic face, suitable for any room decor.
- ພະລັງງານຫມໍ້ໄຟ: Operates on AAA batteries (not included).
ເນື້ອໃນຊຸດ
- Capello Self-Setting Atomic Clock
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
Locate the battery compartment on the back of the clock. Insert 3 AAA batteries (not included) according to the polarity indicators (+ and -). Ensure the battery compartment cover is securely closed.
ຮູບທີ 1: ດ້ານໜ້າ view of the Capello Self-Setting Atomic Clock. This image displays the clock's digital screen, showing the time (12:35 PM), two alarm indicators (ALM 1, ALM 2), the date (12:30 MO), and the indoor temperature (68.2°F). The clock has a white frame and a blue-tinted digital display.
2. Initial Power-On and Atomic Signal Reception
Upon battery installation, the clock will automatically attempt to receive the WWVB atomic time signal. This process may take several minutes to several hours, especially during initial setup. For best reception, place the clock near a window and away from electronic devices that may cause interference. The atomic signal is typically stronger at night.
ຮູບທີ 2: ດ້ານໜ້າໃກ້ໆ view of the Capello Self-Setting Atomic Clock. This image highlights the clear digital display, which shows the time, date, and temperature. The white frame of the clock is visible, emphasizing its clean design.
A signal strength indicator (often a tower icon with waves) will appear on the display once a successful signal is received. If the signal is not received immediately, the clock will default to a manual time setting. You can manually initiate a signal search by holding the "WAVE" button (if present) on the back of the clock for a few seconds.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການຕັ້ງເວລາ ແລະ ວັນທີດ້ວຍຕົນເອງ
In case the atomic signal is not available or for manual adjustment:
- ກົດຄ້າງໄວ້ SET button (or similar, refer to back panel buttons) for a few seconds until the display flashes.
- ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບຄ່າກະພິບ (ເຊັ່ນ: ຊົ່ວໂມງ, ນາທີ, ປີ, ເດືອນ, ມື້).
- ກົດ SET again to confirm the selection and move to the next setting.
- Repeat until all desired settings are configured.
2. ການຕັ້ງຄ່າໂມງປຸກ
The clock features two independent alarms (ALM 1 and ALM 2).
- ກົດ ປຸກ button (or ALM 1/ALM 2 button) to select the alarm you wish to set.
- ກົດຄ້າງໄວ້ ຕັ້ງໂມງປຸກ button (or similar) until the alarm time flashes.
- ໃຊ້ UP ແລະ ລົງ buttons to adjust the alarm hour and minute.
- ກົດ ຕັ້ງໂມງປຸກ ເພື່ອຢືນຢັນ.
- ເພື່ອເປີດ/ປິດການໃຊ້ງານໂມງປຸກ, ໃຫ້ກົດປຸ່ມທີ່ສອດຄ້ອງກັນ ເປີດ / ປິດ button. An alarm icon will appear on the display when active.
3. ຈໍສະແດງອຸນຫະພູມ
The clock displays indoor temperature. To switch between Fahrenheit (°F) and Celsius (°C), locate the °F/°C button on the back of the unit and press it.
ຮູບທີ 3: ມຸມ view of the Capello Self-Setting Atomic Clock. This perspective shows the clock's depth and the sleek design of its white frame, along with the clear digital display from a side angle.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the display or casing.
ການປ່ຽນແບັດ
When the display dims or the clock stops functioning, replace the AAA batteries. Always replace all batteries at the same time with new ones. Dispose of old batteries responsibly according to local regulations.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Clock not setting automatically. | Weak or no atomic signal reception. Interference from other electronics. Incorrect time zone setting. | Relocate the clock closer to a window, away from electronic devices (TVs, computers, microwaves). Try initiating a manual signal search (WAVE button). Ensure correct time zone is set if applicable. Note that the signal is often stronger at night. |
| ຈໍສະແດງຜົນແມ່ນມືດ ຫຼືຫວ່າງເປົ່າ. | ແບັດເຕີຣີຕໍ່າ. | Replace all AAA batteries with new ones. |
| Time is incorrect after Daylight Saving Time change. | Atomic clock may take up to 24 hours to adjust or requires manual adjustment for DST. | Allow up to 24 hours for automatic adjustment. If it doesn't adjust, manually set the time. Some atomic clocks may not automatically adjust for DST and require manual intervention. |
| ປຸກບໍ່ດັງ. | Alarm not activated. Alarm volume too low (if adjustable). | Ensure the alarm icon is visible on the display. Check alarm settings and ensure the time is correctly set. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | Capello |
| ຕົວແບບ | B0170ZSMGG |
| ປະເພດການສະແດງ | ດິຈິຕອລ |
| ແຫຼ່ງພະລັງງານ | Battery Powered (3 x AAA, not included) |
| ຄຸນນະສົມບັດພິເສດ | Atomic, Alarm, Calendar, Indoor Temperature |
| ປະເພດການຕິດຕັ້ງ | ໂຕະ |
| ຂະໜາດສິນຄ້າ | 0.71 x 5.79 x 5.35 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 9.6 ອອນ |
| ວັດສະດຸກອບ | ໂພລີຢູຣີເທນ |
| ສີ | White (Frame), Black (Dial) |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Capello webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
For further assistance, you may contact Capello customer service through their official channels. Please have your model number (B0170ZSMGG) ready when contacting support.