ບັນທຶກTag ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງບັນທຶກຂໍ້ມູນອຸນຫະພູມ UTRIX-16 PDF

1. ບົດແນະນຳ

ໄມ້ທ່ອນTag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Do not expose the device to extreme physical shock or vibration.
• Avoid immersing the device in liquids.
• ຢ່າພະຍາຍາມເປີດ ຫຼື ດັດແປງອຸປະກອນ, ເພາະວ່າການເຮັດແບບນີ້ຈະເຮັດໃຫ້ການຮັບປະກັນເປັນໂມຄະ ແລະ ອາດຈະເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍໄດ້.
• ຖິ້ມແບດເຕີລີ່ຕາມກົດລະບຽບທ້ອງຖິ່ນ.
• Ensure the USB connector is clean and dry before connecting to a computer.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• ບັນທຶກTag UTRIX-16 PDF Temperature Data Logger
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

4. ອຸປະກອນເກີນview

The UTRIX-16 features a compact design with clear indicators and control buttons.

ຮູບທີ 1: ດ້ານໜ້າ view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.

• ALERT Indicator: Flashes when a pre-configured temperature alert threshold has been exceeded.
• OK Indicator: Flashes to confirm normal operation and within-range temperature readings.
• ປຸ່ມຢຸດ: Press to stop the current logging session.
• START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
• Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.

ຮູບທີ 2: ໄມ້ທ່ອນTag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.

5. ຕັ້ງຄ່າ

5.1 ການຕັ້ງຄ່າເບື້ອງຕົ້ນ

The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag webເວັບໄຊ.

1. Download and install the LogTag ຊອບແວການວິເຄາະຈາກ ບັນທຶກTag Recorders Software.
2. Connect the UTRIX-16 to a USB port on your computer.


ຮູບທີ 3: ໄມ້ທ່ອນTag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.

3. ໄມ້ທ່ອນTag Analyzer software should automatically detect the connected device.
4. Follow the on-screen prompts within the software to configure logging parameters as needed.

5.2 ຂໍ້ມູນຫມໍ້ໄຟ

The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.

6. ການດໍາເນີນງານ

6.1 Starting a Logging Session

To start a new logging session:

1. Ensure the device is not currently logging (check the OK/ALERT indicators).
2. ກົດຄ້າງໄວ້ START/ເຄື່ອງໝາຍ button for approximately 5 seconds until the OK indicator flashes rapidly.
3. Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.

6.2 Stopping a Logging Session

To stop an active logging session:

1. ກົດຄ້າງໄວ້ ຢຸດ button for approximately 5 seconds until the ALERT indicator flashes rapidly.
2. Release the button. The device will cease logging.

6.3 Marking Data

During an active logging session, you can insert a mark into the data stream:

• ຫຍໍ້ໆ ກົດເຂົ້າ START/ເຄື່ອງໝາຍ button (less than 2 seconds).
• A mark will be recorded in the data, visible when the data is downloaded and analyzed.

7. Data Retrieval and Reporting

The UTRIX-16 generates a PDF report directly when connected to a computer.

1. Connect the UTRIX-16 to a USB port on your computer.
2. The device will appear as a removable drive.
3. Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
4. For advanced analysis and configuration, use the LogTag ຊອບແວການວິເຄາະ.

8. ບໍາລຸງຮັກສາ

8.1 ການທໍາຄວາມສະອາດ

ເຊັດອຸປະກອນໃຫ້ສະອາດດ້ວຍຜ້າອ່ອນໆ, ຜ້າເຊັດໂຕamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.

8.2 ການທົດແທນຫມໍ້ໄຟ

The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.

9. ການແກ້ໄຂບັນຫາ

10. ຂໍ້ມູນຈໍາເພາະ

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ບັນທຶກTag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag webສະຖານທີ່ຫຼືຕິດຕໍ່ຜູ້ຈັດຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

Official LogTag Webເວັບໄຊ: www.logtag-recorders.com