ແນະນຳ
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- Dual Alarm (Weekday/Daily alarm options)
- ການສະແດງອຸນຫະພູມພາຍໃນ
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- ຟັງຊັນເລື່ອນ
ເນື້ອໃນຊຸດ
ກະລຸນາກວດເບິ່ງວ່າລາຍການຕໍ່ໄປນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- ເຄື່ອງປັບໄຟຟ້າ AC
- ແບັດເຕີຣີ AAA (2x)
- ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)
ສິນຄ້າເກີນview
Familiarize yourself with the main components and controls of your alarm clock.
ຮູບພາບ: ດ້ານໜ້າ view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
ແຜງໜ້າ:
- ຈໍ LCD: Shows current time, indoor temperature, and alarm status.
- ເລນການສາຍ: Projects time onto a surface.
- ປຸ່ມ SNOOZE/Light: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- ປຸ່ມ MODE: Toggles display modes and enters setting menus.
- ປຸ່ມຂຶ້ນ/ລົງ: Adjust values during settings, manually activate atomic time search.
- ປຸກ 1/2 ປຸ່ມ: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- ປຸ່ມຣີເຊັດ: Resets the unit to factory defaults.
- ຊ່ອງໃສ່ຫມໍ້ໄຟ: Holds backup batteries.
- DC ໃນ Jack: ເຊື່ອມຕໍ່ກັບອະແດບເຕີໄຟ AC.
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
- ເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງໜ່ວຍ.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages.
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atomic Clock Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP ປຸ່ມສໍາລັບ 3 ວິນາທີ.
4. ການຕັ້ງຄ່າເຂດເວລາ
After successful atomic synchronization, you may need to set your local time zone.
- ກົດຄ້າງໄວ້ ໂໝດ ກົດປຸ່ມເປັນເວລາ 3 ວິນາທີເພື່ອເຂົ້າສູ່ໂໝດຕັ້ງເວລາ.
- ກົດ ໂໝດ button repeatedly until the Time Zone setting flashes.
- ໃຊ້ UP or ລົງ buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- ກົດ ໂໝດ to confirm and exit, or wait 30 seconds for automatic exit.
ຄໍາແນະນໍາການດໍາເນີນງານ
Manual Time and Date Setting (If Atomic Sync Fails)
- ກົດຄ້າງໄວ້ ໂໝດ ປຸ່ມສໍາລັບ 3 ວິນາທີ. ຕົວເລກຊົ່ວໂມງຈະກະພິບ.
- ໃຊ້ UP or ລົງ ປຸ່ມເພື່ອປັບຊົ່ວໂມງ.
- ກົດ ໂໝດ to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- ກົດ ໂໝດ to exit, or wait 30 seconds for automatic exit.
ການຕັ້ງໂມງປຸກ (ໂມງປຸກ 1 ແລະ ໂມງປຸກ 2)
The clock features two independent alarms (Alarm 1 and Alarm 2).
- ກົດ ໂມງປຸກ 1 or ໂມງປຸກ 2 ກົດປຸ່ມໜຶ່ງຄັ້ງເພື່ອສະແດງເວລາປຸກໃນປະຈຸບັນ.
- ກົດຄ້າງໄວ້ຕາມລໍາດັບ ປຸກ button for 3 seconds. The alarm hour will flash.
- ໃຊ້ UP or ລົງ ປຸ່ມເພື່ອປັບໂມງປຸກ.
- ກົດ ປຸກ button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or ລົງ.
- ກົດ ປຸກ button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or ລົງ.
- ກົດ ປຸກ button to confirm and exit, or wait 30 seconds for automatic exit.
ເພື່ອເປີດ ຫຼື ປິດການໃຊ້ງານໂມງປຸກ, ກົດປຸ່ມ ໂມງປຸກ 1 or ໂມງປຸກ 2 button once. An alarm icon will appear on the LCD when active.
ຟັງຊັນເລື່ອນ
ເມື່ອມີສຽງປຸກ, ກົດປຸ່ມ ແສງ SNOOZE / LIGHT button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
ການຄາດຄະເນເວລາ
- Continuous Projection: ເລື່ອນໄດ້ ໂຄງການເປີດ/ປິດ ສະຫຼັບໄປ ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the ແສງ SNOOZE / LIGHT button to activate projection for approximately 15 seconds.
- Projection Orientation: ກົດ ການໝຸນໂຄງການ button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- ການປັບມຸມການຄາດຄະເນ: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
ໄຟສາຍໄຟ LED
ກົດ ແສງ SNOOZE / LIGHT button to illuminate the LCD display backlight for approximately 15 seconds.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດຫນ່ວຍງານ
Wipe the clock with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
ການປ່ຽນແບັດ
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ການແກ້ໄຂ |
|---|---|
| ຈໍສະແດງຜົນໂມງຫວ່າງເປົ່າ ຫຼືມືດ. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the ໂຄງການເປີດ/ປິດ switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | ກົດ ການໝຸນໂຄງການ button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| ໂມງປຸກບໍ່ມີສຽງ. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | RM338PA |
| ຂະໜາດ (LxWxH) | 4.25" x 1.02" x 3.03" (10.8 cm x 2.6 cm x 7.7 cm) |
| ນ້ຳໜັກ | 0.24 lbs (109 g) |
| ຊ່ວງອຸນຫະພູມພາຍໃນ | -5°C ຫາ 50°C (23°F ຫາ 122°F) |
| ຄວາມຖືກຕ້ອງຂອງອຸນຫະພູມ | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| ການແກ້ໄຂອຸນຫະພູມ | 0.1°C (0.2°F) |
| ການສະຫນອງພະລັງງານ | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| ປະເພດການສະແດງ | Digital LCD with LED Backlight |
| ຄຸນນະສົມບັດພິເສດ | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
ຂໍ້ມູນການຮັບປະກັນ
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
ການຊ່ວຍເຫຼືອລູກຄ້າ
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.